RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Modular Drawer Pedestal Unit ( 10 pieces ) Technical Specifications 1/10 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Top
Requiredsides
Requiredbottom to be fixed up - * All plain panels edge to be banded with 0.8 - 1.0 Mm Thick PVC Tape With The Help Of Hot Melt Glue * Side wall having recess groove N.A * All drawers to be run On Telescopic Channel Of 250 Mm Length With Average Weight Of 0.5 Kg Per Set Having Average Thickness Of 1 Mm Steel Member Of Channel * Openable shutter hung on side of the drawer pedestal unit N.A * Lock System Provided cetral locking system(for three and two drawers) * Mode of Supply of Modular drawer pedestal unit Knocked Down To Be Assembled At Consignee Site By The Seller Knocked Down To Be Assembled At Consignee Site By The Seller MATERIAL Material specification Prelaminated Particle Board of grade II type III of IS:12823/2013. Both sides laminated. Outer side laminated with shade matching with top shade and facia shade and having swede finish. Balancing Laminate of 0.5 mm thickness on the other side. Prelaminated Particle Board of grade II type III of IS:12823/2013. Both sides laminated. Outer side laminated with shade matching with top shade and facia shade and having swede finish. Balancing Laminate of 0.5 mm thickness on the other side. Material of complete body fascia & drawer 18 mm thick prelaminated particle board * Material for pedestal back & drawer bottom 9 mm thick prelaminated particle board. * Skirting N.A * DIMENSION Size 400 mm(width) X 485 mm(depth) X 665 * 2/10 mm(height) MISC Preservation treatment of MDF/Particle Board N.A * Drawer handles Without handles(alternate opening system) * Thickness of powder coating 40 micron minimum * Thickness of electrogalvanizing 20-30 microns * Buffer Provided N.A * COLOUR & FINISH Colour As per Buyer's Choice * WARRANTY Warranty period in number of years 1 1
Required2
Required3
Required4
Required5 CERTIFICATION Test reports to be furnished to buyer on demand YES * Used only ISI marked MDF/PLPB YES * Product Having BIFMA Certification NO * OEM conforming to ISO 9001:2015 YES * OEM conforming to ISO 14001:2015 YES * OEM conforming to ISO 18001:2007 YES * Green guard certification NO * Aiota NO * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents