Provision of certain revenue work. LBW work and special repair work in the area of AGE B/R II under GE (N) Ahmednagar

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard/ dense soil etc complete all as specified and directed by Engineer-in-Charge

M&L for cement concrete type D2 (1:4:8) using 40 mm graded stone aggregate as in foundations, filling and mass concrete etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC nominal Mix type B-1 (1:2:4) using 20 mm garded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed by Engineer-in-Charge

Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC nominal Mix type B-1 (1:2:4) using 20 mm garded stone aggregate as in columns, pillars, piers, posts and struts etc complete all as specified and directed by Engineer-in-Charge

Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc complete all as specified and directed by Engineer-in-Charge

Material and labour formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC nominal Mix type B-1 (1:2:4) using 20 mm garded stone aggregate as in slabs supported on walls, beams and columns floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed by Engineer-in-Charge

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC nominal Mix type B-1 (1:2:4) using 20 mm garded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed by Engineer-in-Charge

M&L for Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engineer-in-Charge

All as per item No. 11 (here-in-before) but 6 to 8 mm dia.

All as per item No. 11 (here-in-before) but 8 mm dia and over upto and incl 10 mm dia as in stirups, spacers and binders

M & L for brickwork with fly ash modular brick, straight or curved on plan exc 6m mean radius, in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for brickwork with fly ash modular bricks, straight or curved on plan to any radius in half brick thick walls, built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 10 mm thick in cement and sand mortar (1:6) on any type of face of brick work or concrete sur-faces finished surfaces even and smooth witthout using extra cement and applying sagol finish etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 15mm thick in cement and sand mortar (1:4) on fair faces of brick work or concrete sur-faces finished surfaces even and smooth witthout using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for providing waterproofing treatment on roof / chajja as per latest zonal specification, as per manufacturer's instructions and as specified after taking down / out as existing as site etc complete all as specified and directed by Engineer-in-Charge.- (a) M&L for cleaning the newly plastered surface with wire brushes and applying two coats of bituminous primer @ 0.25ltrs/sqm and allow to dry. (b) M&L for applying and laying torch APP polymer midified bituminous membrane 3mm thick with non woven polyster matt as reinforced weighing not less 3 kg / Sqm with white gravel/mineral finished by thermofusion process.

Supply only integral water proofing compound etc complete all as specified and directed by Engineer-in-Charge

M&L for preparing new plastered surfaces of walls and applying three coats of white wash on walls etc complete all as specified and directed by Engineer-in-Charge

M&L for preparing new plastered surfaces and applying three coats of white wash on ceiling etc complete all as specified and directed by Engineer-in-Charge

M&L for preparing new plastered surface of walls and applying two coats of cement paint over one coat of primer etc complete all as specified and directed by Engineer-in-Charge

M&L for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed by Engineer-in-Charge

M&L for steel ventilator with top hung shutter including hinges, steel peg stay, etc complete all as specified and directed by Engineer-in-Charge

S&F of framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete all as specified and directed by Engineer-in-Charge

M&L for preparing new steel surfaces of any description and applying two coats of synthetic anamel paint over one coat of red oxide primer,over 10cm in width or girth,not otherwise described etc complete all as specified and directed by Engineer-in-Charge

M&L for sheet glass 3 mm thick , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane etc complete all as specified and directed by Engineer-in-Charge

M&L for moorum/red bajri filling as in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and directed by Engineer-in-Charge

M&L for hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface etc complete all as specified and directed by Engineer-in-Charge

M&L for 75 mm thcik PCC type C- 2, (1:3:6) (40mm graded stone aggregate) as in plinth protection etc complete all as specified and directed by Engineer-in-Charge

M&L for 75 mm thcik PCC type D-2 (1:4:8) (40mm graded stone aggregate) as in sub base etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified anti skid ceramic coloured tiles matching to wall tile, makes as specified in PS, 7-8 mm thick as approved by GE (square / rectangular) area of each tile exc 0.06Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles digitally printed premium designer series of size exc 0.12 Sqm and n'exc 0.18 Sqm , 7-8 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

S&F 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge

S&F factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face , supplying & fixing in frame at site as per specification & drawing etc complete all as specified and directed by Engineer-in-Charge

S&F of solid PVC door frame 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face etc complete all as specified and directed by Engineer-in-Charge

S&F of 125x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate supplied and fixed etc complete all as specified and directed by Engineer-in-Charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm etc complete all as specified and directed by Engineer-in-Charge

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and directed by Engineer-in-Charge

M&L for 100 mm thick cement concrete type B-2 (1:2:4) (40 mm graded stone agreegate) and finished even and smooth with using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw including bending and welding angles as necessary gusset plates rivetting etc not exc 10 Kg each brackets conforming to Fe-410-0 or Fe-310

M & L for preparation of new wooden surface and applying two coats of synthetic anamel paint over one coat of pink primer etc complete all as specified and directed by Engineer-in-Charge

S&F of 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed etc complete all as specified and directed by Engineer-in-Charge

S&F aluminium barrel tower bolts of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge

S&F aluminium handle anodised fabricated type of size 150 mm etc complete all as specified and directed by Engineer-in-Charge

S&F aluminum alloy anodised sliding door bolts with hasp & staples and fixing clips bolts etc length of bolt 300 mm in repairs etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair vitreous China bowl urinal flat back, size of 270X360X450 mm, white, with grating and union for discharge pipe excluding flushing cistern, flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in cement and sand mortar (1:2), securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C0501 Of Parryware or Cat Part No 60001 Of Hindware / Cera

Supply and fix in repairs wash hand basin vitreous China white , flat back or angle type of size 500 X 400 mm incl pillar tap 15mm dia CP, waste chain and plug and porcelain stopper , waste pipe, a pair of brackets,or errecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge .Make :- Cat Part No C0471 (CHT) Indus series Of Parryware or equivalent in Hindware / Cera

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / including flushing cistren etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C0117 Of Parryware or Cat Part No 20042 Of Hindware / Cera

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc complete all as specified and directed by Engineer-in-Charge

S&F Rotational moulded polyethylene triple layered water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part I etc complete all as specified and directed by Engineer-in-Charge

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs stop cock cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1320(Orintal series) of MARC or equivalent in PLUMBER, ESS-ESS

Supply and fix bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No MOR 1020 A(Orintal series) of MARC or equivalent in PLUMBER, ESS-ESS

S&F in repairs gratings 100 mm dia of PTMT etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs, shower rose with shower arm from etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) from MARC or equivalent in Make Plumber,ESS-ESS.

S&F in repairs urinal spreader of PTMT any colour for fixing with 15 mm dia pipes (minimum weight 60 gms) etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs 40 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs 15 mm bore concussive push button taps of cast copper alloy,screwed for iron etc complete all as specified and directed by Engineer-in-Charge

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re- fixing or removal to store etc complete all as specified and directed by Engineer-in-Charge

All as per item No. 61 (here-in-before) but 20 mm bore tubing

All as per item No. 61 (here-in-before) but 25 mm bore tubing

Supplying and laying 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and directed by Engineer-in-Charge

Supplying and laying 20 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and directed by Engineer-in-Charge

Supplying and laying 25 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and directed by Engineer-in-Charge

S&F 16 mm dia male Brass Threaded Adaptor (MTA/ MBTA) etc complete all as specified and directed by Engineer-in-Charge

S&F 16 mm dia Female Brass Threaded Adaptor (FTA/ FBTA) etc complete all as specified and directed by Engineer-in-Charge

S&F 16 mm dia Brass Elbow etc complete all as specified and directed by Engineer-in-Charge

S&F 16 mm dia Brass Tee etc complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia male Brass Threaded Adaptor (MTA/ MBTA) etc complete all as specified and directed by Engineer-in-Charge as approved by GE.

S&F 20 mm dia Female Brass Threaded Adaptor (FTA/ FBTA) etc complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia Brass Elbow etc complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia Brass Elbow (3/4 X ½) etc complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia Brass Tee etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair PVC bib tap 15 mm dia, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge. Make : Prayag or equalent as approved by GE.

M&L cast iron floor/Nahani trap with grating 75mm dia including jointing to waste pipe fixed in cement concrete type (1:2:4) type B1 including removing old traps etc complete all as specified and directed by Engineer-in-Charge

S&F 40 mm bore low density polyet- hylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed by Engineer-in-Charge

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed by Engineer-in-Charge

S&F of 75 mm bore PVC (SWR) bends with access door etc complete all as specified and directed by Engineer-in-Charge

S&F of 110 mm bore PVC (SWR) bends with access door etc complete all as specified and directed by Engineer-in-Charge

M&L for constuction of RCC Hume pipe septic tanks designed to carry sewage and sludge water, excavation in any type of soil, PCC (1:4:8) below foundation, vent shaft, connection etc. complete for 10 users as per Drg etc complete all as specified and directed by Engineer-in-Charge

M&L for 150 mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars etc complete all as specified and directed by Engineer-in-Charge

M&L for concrete bed to drain pipes in PCC (1:4:8) type-D2 using 40 mm graded stone aggregate including packing under, and haunching against the sides of pipes for 150 mm bore pipes after they are laid and tested in etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC (1:3:6) Type - C1 using 20 mm graded stone aggegate as in surface chanel, benching in manhole etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC pre cast manhole cover slab in (1:2:4) type -B1 using 20 mm graded stone aggrgate incl necessary form work and set in cement and sand mortar (1:6), cover slabs (for man holes etc.) etc complete all as specified and directed by Engineer-in-Charge

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed by Engineer-in-Charge

M&L for Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverin/cladding t wall fixed with self tapping screwas etc complete all as specified and directed by Engineer-in-Charge

M&L for Pre-cast cement concrete block masonry of (1:3:6) type C-1 (20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in mortar, complete in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Excavation over area n.exc. 1.5 m deep in soft/loose soil and getting out in soft / loose soil etc complete all as specified and directed by Engineer-in-Charge

M&L for cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in foundation, filling and mass concrete etc complete all as specified and directed by Engineer-in-Charge

M&L for Providing, plain cement concrete (1:2:4) type-B1 using 20 mm graded stone aggregate as in coping on top of manhole or mud stops, chamfered on edges etc complete all as specified and directed by Engineer-in-Charge

M&L for Rendering 10 mm thick in cement and sand mortar (1:4) surfece finished even and smooth with setting coat on fair faces of brickwork or concrete surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for 450 mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars etc complete all as specified and directed by Engineer-in-Charge

Excavation in post holes ( or similar holes) each not exc 0.5, cum getting out in soft/loose soil, returning , filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50 metre and making good surface etc complete all as specified and directed by Engineer-in-Charge

Material and labour machine pressed precast concrete interlocking paver block with glossy finish, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over and including 30 mm thick stone dust cushioning to the pattern etc complete all as specified and directed by Engineer-in-Charge

Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1998 etc complete all as specified and directed by Engineer-in-Charge

Supply and filling in sokage well/pit with brick bats etc complete all as specified and directed by Engineer-in-Charge

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required etc complete all as specified and directed by Engineer-in-Charge

M&L for dismantling and taking down existing unserviceable tube light fitting / Bldg security light from walls etc complete all as specified and directed by Engineer-in-Charge

Supply and fix Endura LED Batten fitting 20 Watt with minimum 2000 lumen output including connecting up with three core twisted flexible copper conductor cable with suitable size from ceiling rose to fitting all as directed by the Engineer-in-Charge. Make : Philips, Model No BN108C LED 20S PSU CDL WH or Equivalent in Wipro / Havells / Jaquar.

S&F LED bldg security light minimum 30 Watt with minium 3000 lumens and New generation energy saving and environmental friendly long life versatile pressure die-cast aluminium roadway luminaire with high power LED as light source of capacity 30W LED 5700 K of Make : Havells Cat No LHEWEBPL6S030 or Equivalent in Philips / Juaqar / Wipro

Taking dow / out unserviceable tube light fitting of any type make polistion / location including choke, starter etc and making arrangements for the addition / alteration to existing tube light for fixing the ultra bright LED polycarbonate tube light 20 W of Make : Jaquar Cat No LTBL01X020XC Philips / Wipro with very high efficiecy suited for installation in existing T8 tubelight with G13 lamp holders to give glare free light etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 20,235.00 shall be deducted from BOQ on account of schedule of credit

M/S MAHESHWARI ENTERPRISES

M/s Jeet Construction

M/S Bhima Construction

M/s. Sagar Traders

MUDRIK ENTERPRISES

G.A. Construction