REPAIR TO JOINERY, FLOORING, PLASTERING, TILES, ROOFING AND CONNECTING ITEMS AT ZONE-I TECH AREA MIL STN JAISALMER

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles).

M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement.

M&L for non skid ceramic coloured tiles of size 300x 300 by 7mm thick as in floors set & jointed in neat cement slurry and pointed in coloured cement to match the tiles and including scread bed or bedding layer 15mm thick in CM 1:6 all as specified.

M&L for ceramic tiles exterior grade 300 x 300 x 10mm (Endura from Johnson or equivalent) including screed bed in CM 1:6, 15 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match all as specified and roughening of exc concrete surfaces all as directed

M&L for vetrified ceramic coloured tiles 9 to 10 mm thick area of each tile exc 0.18sqm but not exc 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM 1:6 all as directed (size 600mm to 600mm)

...ditto…as per item no 05 above. but as in skirting, steps etc in vertical surfaces with 10mm thick backing coat in CM 1:4

M & L non skid ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding .11Sqm but n.exc .18Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6.

M & L glazed ceramic coloured tiles (450x300mm)x 7mm thick joint free in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 etc.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 75mm thk cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring/hard standing as specified

M & L for 60mm thk, M 35 grade machine pressed precast concrete interlocking paver block rubber mould using grey cement and no pigment of any shape and size conforming to IS 15658 - 2006 laid overincl 25mm thk sand cushoining complete.

S & F rubber moulded chequered cement concrete tiles 20cm X 20 cm X 25mm thk with grey cemnt and pigments,set jointed in neat cement slurry as in floors/path etc over and including 15mm thk screed bed in CM 1:4 complete.

M&L for PCC 1:2:4, 100mm thick using 20mm graded aggregate as in flooring.

M& L for PCC 50mm thk type C1 1:3:6 (20mm graded stone aggregate laid in alternative as in plinth protection including finished the surface even and fair without using extra cement and filling the joints with mastic filling ie one part of bitumen 85/25 & 3 parts of sand by weight

Demolition of stone masonry built in cement mortar incl coping of any description all as specified and directed.

M&L squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all as specified.

ditto - as per item No 16, but except stone

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses all as specified.

M & L for Keyed pointing to rubble masonry uncoursed or brought up to courses in cement mortar 1:4.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. loaded bedded and pointed in any mortar

M & L for Granite (of any type) tiles18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types

M&L for machine cut kota stone flooring 550 x 550x 20 to 25mm thk laid over cement screed bed jointed & pointed with grey cement slurry mixed with pigment to match the shade including rubbing &mirror polishing including over a screed bed or bedding layer of 15mm thk in CM 1:6 for laying floor finishes all as specified and directed.

ditto above but on vertical surfaces such as skirting /dado etc including over a screed bed or bedding layer of 10mm thk in CM 1:3 for laying tiles all as speciifed.

M&L sand stone slabs 5 cm thk in sunshades ,chajjas ,shelves ,cills landings, cover stones ,templates etc

Demolistion of precast concrete articles and precast concrete block walling built in cement mortar or cement lime mortar of any thickness or as directed by Engr-in-Charge

M&L Precast cement concrete block masonry with solid blocks PCC 1:3:6, type C1 exc 10cm in width and setting in CM 1:6

Taking down cement plaster on brick/stone/concrete surface including wall tiling or terrazo finish and hacking out joints hacking for key scrubbing down with water etc complete

M & L rendering 10mm thick on surface of stone masonry or surface other than fair face of brickwork in CM 1:6 all and it is to be finished even and smooth without using extra cement all as specified

M&L for rendering 15 mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing in cement mortar 1:4 & finished the surface even & fair without using extra cement all as specified.

M&L for rendering 5 mm thick on fair faces faces of brick work or concrete surfaces of ceilings in cement plaster 1:3 & finished the surface even & fair without using extra cement all as specified.

M & L preparation of new plastered surfaces and applying three coat of white wash on walls complete

M & L preparation of new plastered surfaces and applying three coat of white wash on ceiling

M & L for two coats of cement base paint over a coat of white wash on walls

Taking down shutters of any description not exc 1 Sqm each all as specified and as directed

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each all as specified and as directed

Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 and white wash and cement base paint complete finished all as directed

Ditto- all as per item No 36 above but exc 1.5 sqm and n exc 4 sqm each

S & F factory made second class hard wood plain framed panelled shutters 35mm thick with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle tone veneers, fixed to chowkhat all as specified and as directed.

S & F glazed and skeleton shutters, open rabated and prepared to receive glass gauge etc second class hard wood 35mm thick for door shutter all as specified and directed

Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tubes, S&F in opening as per specification & drawing given in SSR 2010.

M & L for factory made solid PVC moulded door shutter , 28 to 30mm thick (stiles) wuth 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the foront face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing.

S & F aluminium anodized tower bolt 150mm size complete all as specified and directed.

S & F Butt hinges Aluminum 100 mm type C21 complete all as specified and as directed

S & F aluminium handle 125 mm cast type anodized

S & F mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed

S & F Butt hinges MS 100 mm cold rolled complete all as specified and as directed

S & F steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay ,complete with glazing bars ,devetailed or welded

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified.

Galvanized mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples fixed as in reparis

S & F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified.

M&L for Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.

M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Sheet glass, 5.5mm ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty approved by Engr-in-Charge

Dismantling (AC corrugated , semi corrugated etc ) AC sheets in roof coverings complete all as specified & directed by Engineer in charge.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description not othervise provided for

S &F Rolled mild steel framed work as in door or gates of angle or other section confirming to Fe - 410-S with gusset plates, rail braces etc complete drilled for fixing of steel sheeting or other covering and hanging and fixing complete.

S & F Joist, channel, angel or tee sections, fixed independently , without connecting plates etc

S & f for prelaminated particle board, 18/19mm interior grade, prelaminated both sides with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work

M & L preparation of new steel surfaces exc 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer primer

M & L applying two coats of synthetic enamel paint over a coat of prink primer on wood or wood based material over 10 cm width or girth including preparation of new wood surface or previously untreated surface any description.

S&Fin repair vitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with intagral foot rest and making good to the floor complete fixed in repairs.

S & F in repair Vitreous china wash down water closet pan(Pedestal pattern), white (EWC) with necessary P/S Trap and fixed in repairs.

S&F in repair PVC seat cover black/white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete.

S&F in repair bib taps 15 mm dia of cast, copper alloy cp with crutch or butter fly handle screwed down screwed for brass ferrule or iron pipe and fixed in repairs.

S&F in repair two way bib taps 15 mm dia of cast, copper alloy cp with crutch or butter fly handle screwed down screwed for brass ferrule or iron pipe and fixed in repairs.

S & F in repair hand shower for bathroom with Hook & 1.5 Meter Flexible Chain etc

S&F in repair pillar taps 15 mm bore cast copper alloy with capstan head chromium plated screwed down high pressure with or without 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed fixed in repairs.(Prayag Cat Part No.- 8304, Cera Cat Part no. -F 2006101, Hindware Cat Part No. -F 33002,Silver shine model no:-1065)

S & F in repair 15 mm Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed

S & F in repair 20mm stop cock fancy typ cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends or for unions etc

S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long and complete fixed in repairs.

S&Fin repair wash hand basin vitereous china flat back size 550 x 400 mm white incl CP waste coupling waste pipe brackets complete fixed in repairs.

S & F in repair for pressure jet for western type water closet with PVC connection 600 t0 900 mm long including brass head screw and suitable washer.

S & F in repair 600 mm long PVC connection pipe of 15mm bore with PTMT nut at both ends complete.

S&F in repairs Vitreous china urinals with urinal spreader, full stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store

-Ditto- All as per ser No 79, but 20mm dia

S & F 15mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc

-Ditto- All as per ser No 81, but 20mm dia

Dismantling water tanks and removing to store (exc 250 and not exc 500 ltr capacity)

Dismantling water tanks and removing to store (exc500 and not exc 1000 ltr cap)

S&F in repair 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion all as directed by Engg-in-Charge

-Ditto- All as per ser No 85 but 1000 ltr capacity.

S & F in repair 20mm bore dia ball brass valves high pressure ,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and complete all as specified and as directed by Engr-in- Charge.

S & F in repair Chromium plated tubular aluminium anodised 60 cm long towel rail 20mm dia D type complete fixed with screws etc.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.

S & F in repair 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end

M & l for Cutting chases pinning in for concealed water tubing etc and making good cutting not exc 10cm in width or girth to brick stone wall or concrete surfaces

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats

S & F in repair Sheet Glass Shelf Assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

S&F in repair Swivel shower rose 75mm size with arm 195mm long with bend of 45 degree with flange of PTMT any colour fixed in repairs.

S & F in repair Soap dish, chromium plated

S&F powder coated mild steel peg stay set of 05 nos of pegs all as specified and approved by Engr-in-Charge

Dismantling Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately)

M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 all as directed.

M& L plain cement concrete 1:2:4 type B 1 using 20mm graded stone agregate cast in situ kerb stone ,copings,bed plates ,water through and the like including wethering ,slightly rounded or chamfered angles and throating including use of form work (straight or curved ) set in CM 1:4 complete all as specified and as directed by Enginneer in charge

S & F in repair 300 mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete

S&F in repair 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drwn steel spring, fixed in floor complete as directed by Engr-in-Charge.

S&F in repair Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed

M & L for repair in Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of any size or as directed by Engr -in-Charge

S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms)

Dismantling boarding, any description, fixed in any position with nails

M&L Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm all as specified

S&F10 to 12mm Medium density fibre board, exterior grade, fixed to timber framework with screws to frame work complete all as spd

BHAGWATI CONSTRUCTION

M/S RAM NIWAS BISHNOI