3286-1 F-Y 2025-26 MAI VISHESH MARMMAT KE ANTARGAT BAADH EVAM ATIVIRASTI KE KARAN CHATIGIRAST BEERUWALA SE KOTHA MAHMOODPUR MARG MAI MARMMAT EVAM SUDHR KA KARIYE

Providing concrete for plain/reinforced concrete (M-10) in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 including all labour, material, labour cess, T&P etc complete but excluding GST.

Brick masonry work in cement mortar 1:3 in parapet excluding pointing and plastering as per drawing and technical specifications Clauses 600, 900 and 1208.4 including all labour, material, labour cess, T&P etc complete but excluding GST.

Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clauses 613.3 and 1204 including all labour, material, labour cess, T&P etc complete but excluding GST.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 including all labour, material, labour cess, T&P etc complete but excluding GST.

Construction of sub grade and earthern shoulders with approved material obtained from borrow pits with all lifts and leads transporting to sites, spreading, grading to required slope and compacted to meet requirement of table 300.2 including all labour, material, labour cess, T&P etc complete but excluding GST.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method, with rotavator at O.M.C. and compacting with smooth wheeld roller to achieve the desired density, complete as per Technical Specification clause 401. including all labour, material, labour cess, T&P etc complete but excluding GST.

Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-10 Kn in stages to proper grade and camber applying and brooming crushable screening to fill-up the interstices of coarse aggregate watering and compacting to the required dencity grade 2 as per tech.spec.Clause 405 including all labour, material, labour cess, T&P etc complete but excluding GST.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeld roller 80-100 kN in stages to proper grade and camber, applying and brooming stone screening / binding material to fill-up the interstics of coarse aggregate, watering and compacting to the required density.Grading 3 as per Technical Specification clause 405 . including all labour, material, labour cess, T&P etc complete but excluding GST.

Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502 including all labour, material, labour cess, T&P etc complete but excluding GST.

Providing and applying Tack coat with bitumen VG-10 using Bitumen pressure distributer @ 0.30 kg. per sqm on the prepared dry and hungry bitumenious surface cleaned with Hydraulic broom as per Technical specification Clause 503. including all labour, material, labour cess, T&P etc complete but excluding GST.

Providing, laying and rolling of open graded P.C. of 20mm thickness composed of 13.2mm to 5.6mm aggregates eigher using penetration grade bitumen or emulsion to required line grade and level to serve as wearing course on a previously prepared base i/c mixing in a suitable plant, laying and rolling with a three wheeld 80-100 kN static roller capacity, finished to required level and gredes to be followed by seal coat of eigher Type C as per Technical Specification Clause 508 including all labour, material, labour cess, T&P etc complete but excluding GST.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 including all labour, material, labour cess, T&P etc complete but excluding GST.

Please Enable Macros to View BoQ information