Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹46.0 L
EMD Value
₹91,960
Closing Date
23 Nov 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-110/2026-2027 ADDN /ALTN TO TOILET BLDG NO P 782 PROVN OF TOILET AND INTERLOCKING TILES AND PARKING SHED UNDER AGE B/R I AT CHANDIMANDIR
2026_MES_796939_1
GE/CHM-110/2026-2027
Open Tender
Civil Works
Item Rate
180 days
GE Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
Garrison Engineer
₹91,960
Yes
2 Nov 2026
2 Nov 2026
25 Nov 2026
2 Nov 2026
23 Nov 2026
16 Nov 2026
2 Nov 2026 - 9 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkats or frame not exc. 1.5 sqm with shutters (without taking off shutters from the frame) removal from site complete all as specified and directed. | 2 | Each | - | - |
| 2 | Taking down chowkats or frame exc. 1.5 sqm and n exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. | 2 | Each | - | - |
| 3 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge, including making good dismantled portion with PCC (1:2:4) type B-1 in CM 1:3 complete all as specified and directed. | 298 | Kilogram | - | - |
| 4 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
NOTE : Glass will be mesured and paid sepreately | 27 | Kilogram | - | - |
| 5 | 4.80mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels n. exc 0.5 Sqm in each pane, complete all as specified & directed. | 33.7 | Square Metre | - | - |
| 6 | 4.00mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels n. exc 0.5 Sqm in each pane, complete all as specified & directed. | 0.5 | Square Metre | - | - |
| 7 | Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and directed. | 3 | Square Metre | - | - |
| 8 | D' type, 150mm Extruded aluminium alloy handle fabricated type, complete all as specified and directed. | 6 | Each | - | - |
| 9 | 150mm aluminium alloy barrel tower bolts of extruded section, complete all as specified and directed. | 6 | Each | - | - |
| 10 | ACP sheet of 4mm thick, coloured, incl powder coated aluminium beading with EPDM packing, stainless steel screw etc. complete all as specified and directed | 7.6 | Square Metre | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
Tenderpages110.pdf
Tender Documents • 1.16 MB
BOQ_893905.xls
BOQ • 0.54 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .