ADDITION ALTERATION RENOVATION WORKS IN SARASWATHI AND TUNGABADRA BUILDING AT DLRL HYDERABAD

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness below or above ground level, removal fo rubbish and debris and depositing in low lying areas complete all as directed.

M & L for 75mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in floor, plinth protection, foot path etc complete including necessary form work and finishing exposed surface fair and even complete all as directed by Engr in Charge.

S & F Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment (as approved by GE) conforming to IS 15658-2006 of 60 mm thickness, M-35 grade, including dismantling existing unserviceable tiles complete all as specified and as directed .

M&L for sand fillng under floors or in foundations including watering and consolidation complete all as specified and as directed .

Demolition of brick/stone masonry built in cement mortar including all quoins, arches, pillars etc complete all as directed by Engr-in-Charge.

M&L PCC Type B-1 (1:2:4) using 20 mm graded stone aggregate as in kerb walls, copings etc including necessary form work and weathering, slightly rounded or chamfered angles and throating complete all as directed by Engr-in-Charge.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius,in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick/stone masonry walls, ceilings etc. including raking out joints, hacking for key, scrubbing down with water and removing rubbish outside MOD land complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces on walls, rendering is to be finished even and smooth without using extra cement.

M&L Rendering 15mm thick on brick or concrete surfaes in CM 1:4 on walls using integral waterproofing compound finished even and smooth without using extra cement complete all as specified and directed. Note:- Intergal waterproofing compound shall be measured and paid separately under respective item of this schedule.

Supply only integral waterproofing compound.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ) complete all as directed by Engr-in-charge.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L for coloured, non skid ceramic tiles 9 to 10 mm thick (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on & including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

All as per item No 14 above but on vertical surfaces such as skirting and 10mm thick rendering in CM 1:4 as backing coat for tiles complete all as directed by Engr -in- Charge

M&L Glazed ceremic tiles in vertical surfaces 300 x 600 x 9 to 10 mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colour cement to match and 10mm thick rendering in CM 1:4 as backing coat for tiles complete all as specified and directed

Taking down wooden shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm from steel frame/wooden frame and adjusting / easing and refixing in the same opening complete all as directed by Engineer-in-Charge.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm from steel/wooden/PVC frame complete all as directed by Engineer-in-Charge.

Taking down chowkhats or frames exc 1.5 sqm but not exc 4.00 sqm with shutters each(without taking off shutters from the frame) complete all as directed by Engr-in-charge.

S&F 2nd class hard wood plain, solid, straight chowkats and frame wrought, framed, rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as directed by Engr-in-Charge.

S&F in repairs 35 mm thick flush door shutters of solid core construction with both faces is covered with decorative face veneers including first class teak wood beading alround the shutter complete all as directed by Engineer-in-Charge.

M&L for 35 mm thick 2nd class HW rail and style plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated. complete all as specified as directed by Engr-in-charge.

S/F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm thick and plain colour PVC sheet reinforced with MS square tube suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Extruded aluminum hinges 100 mm long fixed to shutters and fixed in repairs complete all as directed by Engr-in-Charge.

S&F in repairs 100mm butt hinges, medium weight, cold rolled mild steel.

S&F mild steel butt hinges, medium weight cold rolled 100mm size complete.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section fixed in repairs complete.

S&F in repairs 200 mm aluminium anodized, barrel tower bolts of extruded section.Make : CROWN/JYOTHI/PRESTIGE

S&F 200 mm aluminium anodized, barrel tower bolts of extruded section.Make : CROWN/JYOTHI/PRESTIGE

S&F 150 mm size aluminum handle fabricated type anodized and fixed in repairs complete all as directed by Engr-in-Charge.Make : CROWN/JYOTHI/PRESTIGE

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete.

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed in repairs complete.

S&F floor door stopper 150 mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in repair complete all as directed by Engineer-in-charge.

S & F aluminium (extruded section body) door closer hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 KG and fixed including taking out old unservicable one complete all as directed by Engr-in-charge.

Taking up or down steel tubing and connections and supply and fixing 15mm dia GI steel tubes, medium grade with all fitting and fixed complete to walls and ceiling or laid in floors incl cutting chases if required all as specified and as directed.

Taking up or down steel tubing and connections and supply and fixing 20mm dia GI steel tubes, medium grade with all fitting and fixed complete to walls and ceiling or laid in floors incl cutting chases if required all as specified and as directed.

Taking up or down steel tubing and connections and supply and fixing 25mm dia GI steel tubes, medium grade with all fitting and fixed complete to walls and ceiling or laid in floors incl cutting chases if required all as specified and as directed.

S&F in repairs ball brass valves of 20 mm dia, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule complete.

S&F in repairs ball brass valves of 25 mm dia, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule complete.

S & F in repairs 20 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as directed.

S & F 75 mm bore CI sand cast soil, waste and vent pipes in any length with or without ears, with cement joint fixed to wall or floors incl taking down old pipes complete all as directed.

S & F in repairs 100 mm bore CI sand cast soil, waste and vent pipes in any length with or without ears, with cement joint fixed to wall or floors incl taking down old pipes complete all as directed.

S & F in repairs 75 mm bore CI bends (any radius), diminishing pieces or tapers.

S & F in repairs 100 mm bore CI bends (any radius), diminishing pieces or tapers.

S & F in repairs 75 mm bore CI bends (any radius), diminishing pieces or tapers with oval access door.all as specified and as directed

S & F 100mm bore CI bends (any radius), diminishing pieces or tapers with oval access door all as specified and as directed.

S & F in repairs 75 mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel brances with oval access doors all as specified and as directed

S & F in repairs 100 mm bore branch pieces, single or double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel brances with oval access doors all as specified and as directed

S & F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with capstan head handle, screwed down, screwed for iron pipe complete all as directed.

S & F in repairs 15 mm dia angle valves, cast copper alloy, chromium plated, fancy type screwed down, high pressure, with capastan head, screwed both ends for iron pipe complete all as directed by Engr in Charge.

S & F in repairs 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe complete all as directed by Engr in Charge.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm long.all as specified and as directed

S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm long.all as specified and as directed

S&F in repairs 32mm dia PVC flexible waste pipe of length exceeding 60cm but not exceeding 90cm complete all as specified and directed.

S&F in repairs counter top ( self rimming) wash hand basin white Cat Part No 10017 of Hindware tucked in granite slab including 15mm dia cast copper alloy chromium plated swan neck pillar cock cat part no MQT-ESS-510AKN and CP waste fittings 32mm dia complete all as specifiedand directed by Engr -in-Charge.

S & F in repairs vitreous china wash hand basin, white, flat back of size 550x400 mm excluding taps, waste, chain and plug and procelain stopper but including bracket and CP brass waste fittings 32 mm dia complete all as directed by Engr in Charge.

S & F in repairs vitreous china wash down water closet pan (pedestal pattern) (EWC), white including plastic water closet seat, white, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device and fixing bolts complete all as directed by Engr in Charge.

S & F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests, suitable CI trap including connection to trap, flushing pipe, ant syphonage pipe etc. including trap set in complete all as directed by Engr in Charge.

S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable PVC flush pipe 32mm dia complete all as directed by Engr in Charge.

S&F in repairs towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 190gms) complete all as directed by Engr in Charge.

S&F in repairs Vitreous China urinal, half stall type of size 46x30x71 cm, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1`:2 , securing urinal to plugs with, including S&F 40 mm dia CP brass waste coupling, CP brass urinal spreader, CP connection of suitable length and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. Make :Cat part No 96010 of Hindware or equivalent in Parryware

Taking down existing roof treatment of any description , any thickness and removing the debris outside MOD land complete all as specified and directed by Engineer-in-Charge.

Roughening surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust etc and brushing neat cement slurry with 3 Kg /Sqm on concrete surface complete all as directed by Engineer -in- Charge. .

M&L screed bed 15mm cement plaster in CM 1:4 on concrete surfaces duly mixed with water proofing compound and finished even and smooth by using steel trovel (WPC will be measured saprately) complete all as directed.

M&L for rendering 10mm in CM 1:3 over concrete surfaces on RCC roof slab and parapets mixed with WPC @ 3% by weight of cement shall be carried out complete all as specified and directed by Engr-in-Charge. Note : WPC will be measured under separate item of this schedule.

M&L water proofing treatment with 3 mm thick APP membrane of weight not less than 3kg per sqm reinforced with polyster non wove fabric laid over primed surface by forced application complete. Shall be fused uniformly by LPG torch flame on horizontal/vertical/ slope surface on roof complete all as specified and directed by Engr-in-Charge.Water proof treatment consist of as under: -(i) Applying one coat of bitumous primer conforming to IS 3384 @ 0.3 ltrs per sqm (ii) Appplying one coat of bitumen grade 85/25 @1.20Kg per sqm. (iii) Laying APP based memberane as per specified thickness and weight.

M&L for preparation of surfaces of any description, over 10cm in width or girth or otherwise described and appplying two coat of aluminium paint @100ml per sqm over APP membrabe sheet complete all as specified and directed by Engr-in-Charge.

M&L for hydraulically pressed cement tile with grey cement and no pigment of size 250x250x19/20mm machine made laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed, pointed in CM 1:3 mixed with 5% crude oil by weight of cement.

M&L for cutting grooves in brick wall 70mm wide and 65mm deep and sweeping horizontal face of groove with cement mortar (1:3) and making good in CM 1:3 after inserting membran into the groove complete all as specified and directed by Engr-in-Charge.

S&F MS work framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted incl welding etc and applying two caots of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling wall and ceiling boards etc of any description including ceiling grid, complete all as directed by Engr-in charge.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as directed by Engr-in charge.

S&F Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified

M&L for providing 12mm thick Gypsum board ( 600 x 600mm) in ceiling fixed with screw as per manufacturers instructions and finished with two coats of plastic emulsion paint over a coat of primer over 2 mm thick putty complete all as specified.

Demolition of RCC cement concrete slab of manholes/ drain covers complete all as directed by Engineer-in-Charge.

M & L for RCC 1:2:4, type B1 using 20 mm graded stone aggregates in pre-cast cover slabs for manholes including necessary form work and set in CM 1:6 complete all as specified and directed by Engineer-in-charge.

M/L for mild steel deformed TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends and binding with and including mild steel wire annealed not less than 0.90 mm dia or securing clips quality confirming to IS complete all as specified and directed by Engineer-in-charge

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, properly rolled on glass panes without any wrinkle including removal of existing unserviceable film on windows/doors complete all as directed by Engr-in-Charge. Make : GARWARE OR EQUIVALENT

S&F in repair for rectangular aluminium hollow section of size 101.6 x 44 x 2mm thick as in partition (including fixing with nut and bolt in floor and wall by drilling holes), powder coated of approved colour for both vertical and horizontal member including 5.5mm thick glass, 12mm thick particle board prelaminated on both side, aluminium legs, aluminium glazing channel, rubber beading as required (Size of panel nexc 01 Sqm each) incl taking down old partition complete all as directed.

.-ditto- as per item No 83 above but as in door, powder coated, approved colour, including 5.5mm thick glass, 12mm thick particle board prelaminated on both side, door mounted on floor spring, powder coated aluminium beading and rubber beading etc, one mortice lock, two powder coated aluminium door handle D type 250 mm long, one powder coated alum tower bolt of 200 mm length and one 250 mm long sliding bolt for each leaf, including taking down old door complete all as specified and directed

S&F in repairs 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl making holes in RCC parapet wall and making good complete all as directed by Engr in charge.

S&F in repairs 150mm dia PVC bends/shoes suitable to PVC rain water pipe including necessary clamps etc fixed on wall all as specified and directed by Engr in Charge.

S&F in repairs cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by Engr-in-charge.

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including concealed stop cock and fixed in position complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks white (cylindrical vertical with closed threaded lid) hoisted and fixed in position all as specified in SSR Part I incl dismantling of old unserviceable tank complete all as specified.

Complete removal of existing treatment on walls including cornices etc, by scrapping mechanically and applying 2 mm thick wall care putty over one coat of alkali resistant primer and finally applying two coats of distemper oil emulsion complete all as directed by Engineer-in-Charge.

Complete removal of existing treatment on ceiling including cornices etc, by scrapping mechanically and applying 2 mm thick wall care putty over one coat of alkali resistant primer and finally applying two coats of distemper oil emulsion complete all as directed by Engineer-in-Charge.

M&L preparation for new plastered wall surfaces and applying 2 mm thick wall care putty over one coat of alkali resistant primer and finally applying two coats of distemper oil emulsion complete all as directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of weatherproof antifungal acrylic exterior paint over a coat of primer over 2 mm thick birla wall care putty for smooth finish complete all as specified and directed by Engr-in-Charge. (Make : APEX ALTIMA OF ASIAN PAINTS OR EQUIVALENT)

S & F Stainless steel hand rail/posts/struts of Grade 304 SG including necessary fixing arrangements, welding, buffing, polishing etc., complete all as required at site and as directed by Engineer in Charge.

S&F brass cutting letters of size 300mm high and 25mm wall thickness, appolex lacquer coated, including soldering with lead, buffing and colouring with standard colour ISI standard, MRF brand fixed on existing ACP/any type of wall surfaces with brass bolts and nuts complete all as specified and as directed.

S&F brass DRDO logo round of size 600mm dia and 25mm wall thickness, appolex lacquer coated, including soldering with lead, buffing and colouring with standard colour ISI standard, MRF brand fixed on existing ACP/any type of wall surfaces with brass bolts and nuts complete all as specified and as directed.

S & F UPVC casement windows made up of profile section size of 58x60 mm having outer wall thickness 2.0mm (+/- 0.2mm ) and three box multi chamber construction. Glazed shutter made up of section 78x60 mm having outer wall thickness of 2.0mm (+/- 0.2mm ) and including 5mm thick plain sheet glass alongwith mosquito proofing shutter made up of section 78x60 mm having outer wall thickness of 2.0mm (+/- 0.2mm ) with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm. Where ever required/specified, system shall have the sash mullion of size 78x60 with outer wall thickness 2.0mm (+/- 0.2mm). All sections of frame, sashes, transom and mullion shall be reinforced with 1.2 mm thick GI steel section considering structural/wind load requirements. All the corners/mullion/ transom joints of the frame & sash shall be mitred cut fusion welded with out any mechanical jointing. all welded joints are neatly trimmed & feature grooved and raised nib finish so as to make the finish product free from all sharp edges & burrs. System shall have adequate drianage mechanism to permit the escape of water from horizotal member beneath in each unit. Shall be provided suitable UPVC beads for glazing and fitted with inner and outer EPDM weather seal gaskets.To be provided with proper operative and locking hardware mechanism and 304 grade friction hinges, frame to be fixed to wall with high quality fasteners and silicon glue is to be applied to fill up gap between frame and wall to make leak proof as per manufacturer's instructions including taking down old windows all as specifed.

S & F UPVC top hung ventilators made up of profile section size of 58x60 mm having outer wall thickness 2.0mm (+/- 0.2mm ) and three box multi chamber construction. Glazed shutter made up of section 78x60 mm having outer wall thickness of 2.0mm (+/- 0.2mm ) and including 3mm thick frosted glass. Where ever required/specified, system shall have the sash mullion of size 78x60 with outer wall thickness 2.0mm (+/- 0.2mm). All sections of frame, sashes, transom and mullion shall be reinforced with 1.2 mm thick GI steel section considering structural/wind load requirements. All the corners/mullion/transom joints of the frame & sash shall be mitred cut fusion welded with out any mechanical jointing. all welded joints are neatly trimmed & feature grooved and raised nib finish so as to make the finish product free from all sharp edges & burrs. System shall have adequate drianage mechanism to permit the escape of water from horizotal member beneath in each unit. Shall be provided suitable UPVC beads for glazing and fitted with inner and outer EPDM weather seal gaskets.To be provided with proper operative and locking hardware mechanism and 304 grade friction hinges, frame to be fixed to wall with high quality fasteners and silicon glue is to be applied to fill up gap between frame and wall to make leak proof as per manufacturer's instructions including taking down old vents all as specifed.

S&F venetian blinds roller zebra type, multicolor fiber water resistant,UV protection,transparent,black out suitable for window etc fixed incl taking down old blinds complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar complete all as specified

M&L for 18 to 20mm thick polished granite stone lakha red as in steps of staircase and landings etc including oxide polish to top and edges,groove cutting and making half round nosing laid over 15mm thick screed bed in CM 1:4 bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone complete all as directed by Engr-in-Charge.

M&L for 18 to 20mm thick polished granite work (of any type) lakha red machine cut, in wall cladding or vertical surfaces etc fixed over 10 mm thick rendering in CM 1:4 as backing coat and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, complete all as directed by Engr-in-Charge.

Taking down carefully of any type point wiring light fans socket or power complete fitting such as switch ceiling roses, pendent, regulator, sockets etc removing material and making good disturbed surface of wall floor etc complete all as direct by Engr -in -charge.

M&L Point wiring complete with ISI marked 1.5 Sqmm single core PVC insulated FRLS unsheathed cable 1100 Volts grade with multistranded copper conductor drawn through in and including medium grade PVC conduit and accessories concealed in wall suitable for terminal boxes for fixing modular switches, sockets etc including suitable size modular plates concealed in walls and 1.5 Sqmm copper conductor as earth continuity to connect common earth dolly complete for One light point controlled by one 5 Amps one way switch all as specified and directed:- NOTE:- The quoted rate shall deemed to include for modular cover plates with frame of any colour and metal flush boxes of any type and size.

All as per item No. 104 above but One ceiling fan /exhaust fan point controlled by one 6 Amps one way switch

All as per item No. 104 above but One 3 pin socket outlet 6 Amps on the same board with other switches.

All as per item No. 104 above but One 3 pin 6 Amps switch socket outlet point on independent board

Description all as per item No 104 here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed by Engr-in-Charge,

S&F modular type 06 Amps, 05 pin mulitipurpose switch, socket outlet 03 Nos and 16 Amp multipurpose switch, socket outlet 01 Nos on one switch board concealed in wall suitable for terminal boxes for fixing of switch sockets etc including suitable size modular plates and including all internal elctrical connections with copper conductor complete all as specified and directed by Engr-in- Charge.

S&F modular type 06 Amps, 05 pin mulitipurpose switch, socket outlet 04 Nos on one switch board concealed in wall suitable for terminal boxes for fixing of switch sockets etc including suitable size modular plates and including all internal elctrical connections with copper conductor complete all as specified and directed by Engr-in- Charge.

S&F Modular Switch 1 way, 6 Amps 1 Module complete all as specified.

S & F modular switch 1 way, 16 amps, 1 module complete all as specified

S & F Modular sockets, 6 amps 2/3 pins combined 2 module complete all as specified

S & F Modular sockets,16 amps 5 pins combined 2 module complete all as specified

S & F Modular fan regulator, 120 watts, 2 module complete all as specified. Note :- Fan Regulator only taken for Ceiing Fan not for wall mounting fans.

Supply and fixing Sheet Metal enclousure Plug and socket type DB (Functional Unit) 20 Amps capacity with provision of single pole 20 Amps MCB, plug top and earth plug, grouted flush to walls complete all as specified. Make- Legrand / Schneider/C&S/INDO COPP)

S&F MCB TPN 63 Amps 415 volts 10 KA 'C' curve complete all as specified and as directed

S&F MCB SPN 40 Amps 230 volts 10 KA 'C' curvecomplete all as specified and as directed

S&F MCB SP 6 to 40 Amps 230 volts 10 KA 'C' curve complete all as specified and as directed

Dismantling of existing unserviceable MCB distribution board and S&F sheet metal enclosure DB concealed with wall having facility to fix MCCB as incomer and MCBs in outgoing, TP vertical type 8 way of double door, complete fitted with bus bars, neutral links, G frame including S&F 3 pole MCCB 100 Amp capacity, 50 Hz, 16 KA Breaking capacity, blanking plates including making good disturbed surfaces complete all as specified and directed.

Dismantling of existing unserviceable MCB distribution board and S&F sheet metal enclosure DB concealed with wall having facility to fix MCCB as incomer and MCBs in outgoing, TP vertical type 8 way of double door, complete fitted with bus bars, neutral links, G frame including S&F 3 pole MCCB 125 Amp capacity, 50 Hz, 16 KA Breaking capacity, blanking plates including making good disturbed surfaces complete all as specified and directed. Make: LEGRAND/L&T/SCHNIEDER

Dismantling of existing unserviceable MCB distribution board and S&F sheet metal enclosure DB concealed with wall having facility to fix MCCB as incomer and MCBs in outgoing, TP vertical type 4 way of double door, complete fitted with bus bars, neutral links, G frame including S&F 3 pole MCCB 100 Amp capacity, 50 Hz, 16 KA Breaking capacity, blanking plates including making good disturbed surfaces complete all as specified and directed. Make: LEGRAND/L&T/SCHNIEDER

S&F Sheet metal enclosure SPN DB 8 Way Double Door including all connections.

S&F Sheet metal enclosure SPN DB 4 Way Double Door including all connections.

S&F LED 2'x2' industrial luminaries 36 Watt with L120 lm/watt 5700K CCT l luminaries affiances , Recess mounted , with Drive , connecter block, etc complete with all accessories internally pre-wired and including connecting up 3 core sheathed copper flexible cable 1.5 sqmm up to light fitting and connecting testing complete fixed on false ceiling complete all as specified and directed. Make: Jaguar cat part LULTUISO36XC or equivalent in Philips/Wipro.

Supply & Fixing LED fitting.indoor Batten light , 1 x 22 W , 230 V, Energy efficient, aluminium housing ,with Drive , connecter block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make: Jaquar cat part LGLZU1X022XC or equivalent in Philips/Wipro

Supply & Fixing industrial LED fitting indoor type 33 W 1’x4” 230 volts energy efficient with mounted , with Drive , connecter block, etc. complete with all accessories internally pre-wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. Make: Jaquar cat part LULU4SLO33XC or equivalent in Philips/Wipro.

Supply & Fixing industrial type LED fitting Recess mounted luminaries 36/40W, 1X4ft 230v with driver , connecter block, energy efficient etc complete with wall mounting arrangement and all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells cat part PLUTONEO4X1PLR36WLED857S or equivalent in Philips/Wipro.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 protection incl 32mm dia medium grade GI pipe bracket not less than 1.5m long , bent to shape and necessary fixing arrangement complete all as specified and directed. Make: Jaquar cat part LSRTO15070XC or equivalent in Philips/Wipro

M&L for submain wiring comprising single core ,4 runs of 10 sqmm nominal cross sectional area multistranded copper conductor cable, PVC FRLS insulated unsheathed 1100 Volts grade drawing in and including not less then 25 mm dia PVC Conduit and conduit fittings complete including S&F ,2 X 10 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete incl taking down old UNSV sub main all as specified. Note :- six runs of 10.0 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.

Description all as per Item No-130 above but with 4 runs of 6 Sqmm copper cable and 2x4 Sqmm as earth continuity conductor complete all as directed by Engr-in-charge. Note: six runs of 6 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.

M&L, connection by using sub main wiring of two runs of single core 6 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded 1100 V copper conductor and drawing through in and including not less then 20 mm dia PVC Conduit Concealed /surface type of suitable size and connecting terminal ends including provision of 1 run of 6 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and all arrangement to connecting with Panel to DB with all accessories as directed by Eng-in-charge. Note: 3 runs of 6 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.

Description all as per Item No-132 above but with 2 runs of 4 Sqmm copper cable and 1x4 Sqmm as earth continuity conductor complete all as directed by Engr-in-charge. Note: 3 runs of 4 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.

Description all as per Item No-132 above but with 2 runs of 2.5 Sqmm copper cable and 1x2.5 Sqmm as earth continuity conductor complete all as directed by Engr-in-charge. Note: 3 runs of 2.5 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.

Taking down ceiling fan/ exhaust fan/ Wall mounting Fan of any make, sweep and dismentling, cleaning , greasing, overhauling and providing two coat of synthetic enamel paint of existing colour and refixing to its existing place including connections with new flexible cable 3 core copper conductor complete. For Ceiling fan - adjustment for providing new down rod including new canopy, clamp, rubber reel, all as directed by Engr-in-Charge.

Removing of old UNSV conduits and S&F DLP U PVC adaptable trunking system of three section with accessories for mounting of Equipment Control Wires, Telecommunication Wires and electrical Cables with mounting. Note (One Running Meter include with Base body 150 x 50mm , flexible full Cover width of 40mm , Seperation partition for 105 x 50 Trunking, Base Joint (Body Joint - fro aligninng bases for installation, cover joint for 40mm width, Left or right end Cap & Internal/ External Angle.) all as directed by Engr-in-Charge.

Cutting existing steel tubing for alterations upto 50 mm GI tubing complete all as directed. ( Each cut measured)

S & F GI tubing 50mm bore, medium grade with all fittings and fixtures laid in trenches complete all as specified.

S & F GI tubing 40mm bore, medium grade with all fittings and fixtures laid in trenches complete all as specified.

S & F GI tubing 25mm bore, medium grade with all fittings and fixtures laid in trenches complete all as specified.

S & F GI tubing 15mm bore, medium grade with all fittings and fixtures laid in trenches complete all as specified.

S & F stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe/fittings or for unions and fixed, ISI marked, of size 50mm bore dia of pipe complete all as specified and directed.

S & F stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe/fittings or for unions and fixed, ISI marked, of size 25mm bore dia of pipe complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 2000 Ltr Capacity,3 layered, hoisted and fixed in position all as specified.

S & F 25mm Ball brass valves high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.

S&F 20mm Bib taps , cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule and fixed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/ dense soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers each not exceeding 25cm thick using soil complete all as directed.

Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed.

Supply & Fixing, Commissioning and Testing of the 4 Loop micro processor based Analog addressable fire alarm control panel with battery backup, Networkable. Make :- Honeywell/ NOTIFER/ESIS/EXFLAME

Supply, Fixing, Commissioning and testing of the analog Addressable multi sensor smoke/ Heat detector. Make :- Honeywell/ GE / FYKE

Supply, Fixing, commissioning and testing of the analog Addressable Sounder with fixing accessories. Make :- Honeywell/ GE / FYKE

Supply, fixing, commissioning and testing of the analog Addressable fault isolators. Make :- Honeywell/ NOTIFER/ GE / FYKE

Supply, fixing, commissioning and testing of the analog Addressable Manual Call Point Make :- Honeywell/ GE / FYKE

Supply and fixing Response indicator for analog addressable Make : Honeywell/ GE / FYKE

Supply and fixing and testing of 2 runs of 1.5 sqmm single core PVC insulated unsheathed FRLS multistranded copper conductor flexible wire drawn through 25mm dia rigid PVC conduit medium grade complete. Note: PVC conduit will be measured and paid separately

Supply, Installing and testing of I/O Module. Make : Honeywell/ NOTIFER/ GE

S&F Rigid non-metallic PVC conduit of size 25 mm dia inclusive of boxes (junction/terminal) but inclusive of all tees, bends elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 sq mm 3.5 core.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70.0 sq mm 3.5 core.

Supply , install , test & commissioning of LT Panel indoor type, CPRI approved, Cubicle type, factory fabricated out of CRCA Sheet of 2.0 mm thick dust, vermin proof, weather proof, IP-54 Grade of protection with both side opening and locking arrangement including providing busbar chamber for connecting outgoing cables made with Aluminium bus bar of capacity 600 Amps rating for 415 V 50 Hz 4 wire system color sleeved bus bar with off neutral bus including internal wiring using suitable size not less than 1.5 sqmm FRLS copper conductor cable along with ferouts. The panel shall be painted with anticorrosive coating and finally epoxy polyester powder coating of RAL 7032 shade shade . The panel should be mounted on 'C' channel base of required size duly coated with anti corrosive paint. the circuit distribution lines to be marked over the panel using poly venyl reflective stickering complete with following components :-. INCOMING (A) MCCB 400 AMPS 4 POLE 35/36 KA WITH MICROPROCESSOR RELEASE,lcu=100%of lcu with adjustable overload setting with rotary handles to operate -01 OUTGOING (a) MCCB 250 Amps 4 pole 25 KA adjustable thermal over load release and short circuit relese -01 (b) MCCB 200 Amps 4 pole 25 KA adjustable thermal over load release and short circuit relese -02 (c) MCCB 160 Amps 4 pole 16 KA adjustable thermal over load release and short circuit relese -03 (d) 3 phase panel complete indicating of LED lamps RED YELLOW and BLUE - 01 set (e) Digital type voltmeter 0 to 500 Volts,Ammeter 400/5a LT CT operated complete-01 set Make: of switch gear LEGRAND/L&T/SCHNIEDER Note :- The panel drawings and switch gear specification should be submitted in prior for approval of GE

M&L Earthing complete with GI earth plate electode 600x600x6.3mm buried directly in ground vertically, earth pit not less then 2.25 mtr deep below ground level with the top edge of earth plate at a depth of not less than 1.5 mtr below ground and connected to GI earth strip 25 x 4 mm size by means of bolts, nuts & washers of galvanised iron or steel, GI earth strip shall be protected by 40 mm dia GI pipe (light grade) up to connecting point, watering pipe 20mm dia GI Pipe medium grade, GI Wire mesh funnel, alternate layers of Charcoal and Salt including necessary excavation and earth work, PCC (1:3:6) type C-1 eatth Chamber, 40mm thick RCC cover 1:2:4 type B-1 mix with 6mm dia nominal reiforcement @ 100mm c/c both ways etc complete all as shown in electrical plate No 3 connected to earth tested point, including testing on completion, complete all as specified and directed. Note :- Earth strip beyond 7.5 Mtr, if required shall be measured and paid seperately under respective item of schedule.

Earth continuity conductor GI strip 25 x 4mm as main earthing lead fixed to wall or batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc as required.

M & L precast concrete cable cover, class LV, type I, flat of size 250mm x 150mm x 40mm complete all as specified and directed.

Supply and spreading of natural, clean, dry, river sand in trenches for cable protection / transformer yard/ two pole structure yard complete all as directed. Note:- Punned thickness only shall be measured for payment purpose.

Supply and fix GI tubing 100 mm 'light grade',galvanised, with all fitting; laid in trenches complete all as directed.

M & L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius using old size brick built in CM 1:6 complete all as specified.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F Glazed coloured ceramic tiles in vertical surface 450 x 300x 7 mm thick ,set and jointed in neat cement slurry and pointed in white or cloured cement 10mm thick backing coat CM of 1:4 complete all as specified and as directed. Note : Rate includes for cutting for offsets etc) complete all as specified and directed.

S&F light shade vitrified tiles edge cut 10mm thick ( square/ rectangular ) polished, area of each tiles not exceeding 0.36sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 15mm thick screed bed in CM (1:4) finished fair and even complete all as specified and directed.

All as per item No 172 above but on vertical surfaces such as skirting and 10mm thick rendering in CM 1:4 on fair faces of brick / concrete surfaces as backing coat for tiles complete all as directed by Engr -in- Charge

S&F in repairs 30 mm thick flush door shutters of solid core construction with both faces is covered with decorative face veneers including first class teak wood beading alround the shutter complete all as directed by Engineer-in-Charge.

S&F in repair 15mm dia bib taps two way, cast copper alloy chromium plated fancy type with capstan head, screwed down, screwed for iron pipe complete all as directed.

Hacking out old broken glass ( any thickness , size, quality or description ) from wood/ steel frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones and S&F 3mm thick figured glass, pin headed type and glzing with oil putty in squares n exc 0.50 sqm in each complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass ( any thickness , size, quality or description ) from wood/ steel frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones and S&F 3mm thick plain sheet glass, pin headed type and glzing with oil putty in squares n exc 0.50 sqm in each complete all as specified and directed by Engr-in-Charge.

M&L PCC padding concrete/ roof kerbs type B0, 1:2:4 ( using 12.5mm graded stone aggregate) to maintain proper slope on roof slabs complete all as specified and directed.

S&F in repairs 20mm dia PVC ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes and fixed ( minimum wieght 20mm - 210 gms) complete all as specified

S&F in repairs 25mm dia PVC ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes and fixed ( minimum wieght 20mm - 210 gms) complete all as specified

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways, railing, frame work of water tanks and similar works conforming to Fe-290, Gde -E- 165 complete all as specified

M & L preparing new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome primer complete all as specified

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; and similar small articles all as specified.

M&L for providing cement concrete 1:2:4 , type B1, using 20mm graded stone aggregate as in holdfasts, copings and the like complete all as specified.

M & L for complete removal of existing treatement and and applying two coats of weather proof Acrylic Exterior emulsion paint of Apex Ultima and shade over a coat of approved primer as recommended by the manufacturer over a coat of putty to make surfaces smooth all as required and as directed.

S&F UPVC three track multicavity frame section 75mm x 64mmx23mm suitably reinforced with GI and glazed shutter fitted with 5mm thick tinted glass in windows alongwith sliding wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature. All sections of frame, sashes, transom and mullion shall be reinforced with G/J/U/O shape galvanised MS section considering structural / wind load requirement. All the corners/ mullion/ transom joints of the frame & sash shall be mitred cut fusion welded without any mechnical jointing all welded joints are neatly trimmed & feature grooved and raised nib finish so as to make the finish product free from all sharp edges & burrs. System shall have adequate drianage mechanism to permit the escape of water from horizontal member beneath in each unit shall be provided suitable UPVC beads for glazing and fitted with inner and outer EPDM weather seal gasket to be provided with proper operative and locking hardware mechanism, frame to be fixed to wall with high quality fasteners and silicon gllue is to be applied to fill up gap between frame and wall to make leak proof incl taking down old window complete all as specified and as per manufacturer.

S&F factory made sheet metal enclosure TPN DP 8 way 415v Double door with MCB TPN as incoming and MCB’s as outgoing flush mounted on wall and making good the disturbed surfaces, matching to the existing wall including all connections .

S&F factory made sheet metal enclosure SPN DP 12 way Double door with MCB SPN as incoming and MCB’s as outgoing flush mounted on wall and making good the disturbed surfaces, matching to the existing wall including all connections

S&F MCB TPN 63 Amps 10KA ‘C’ Curve 415 volts complete all as specified and as directed by Eng–in–Charge.

Supply and fixing LED lights fitting 1X 20W 220v,Ac decorative box type with motion tech driver including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make: Havells cat part LUMILINESMART 20 W LED 865 PCWH or equivalent in Philips/Wipro

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection incl 32mm dia medium grade GI pipe bracket not less than 1.5m long , bent to shape and necessary fixing arrangement complete all as specified and directed. Make: Jaquar cat part LPCRSRT36WXC or equivalent in Philips/Wipro.

M&L for submain wiring comprising single core ,4 runs of 4 sqmm nominal cross sectional area multistranded copper conductor cable, PVC FRLS insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits and conduit fittings complete including S&F ,2 X 4 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete incl taking down old UNSV sub main all as specified.Note :- Six runs of 4 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.

Removing of Old Earth Strip any type and Supply & fixing New Earth continuity conductor copper strip 20 x 3mm as main earthing lead fixed to wall or batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc as required.

S&F 40mm Bib taps , cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule and fixed

M&L for submain wiring comprising single core ,2 runs of 1.50sqmm nominal cross sectional area multistranded FRLS copper conductor cable, conforming to IS-649, insulated unsheathed 1100 Volts grade drawing in and including 20mm dia. PVC conduits and conduit fittings concealed/ surface type complete including 1x1.5sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete incl taking down old UNSV sub main all as specified. Note :- 3 runs of 1.5 Sqmm cable and 1 run of 20mm PVC conduit shall be measured as one unit length.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 400.0 sq mm 3.5 core.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120.0 sq mm 3.5 core.

M & L Chemical Earthing complete with copper earth plate electrode 900x600x5mm buried directly in ground vertically to a depth of not less than 2.25mtr below ground level than 1.5mtr below ground level connected to copper strip 32x6mm by means of bolts washers etc made out of copper earth strip will be protected by galvanized iron pipe medium grade 50mm bore up to main distribution board / main switch including necessary excavation and earth work PCC 1:3:6 type CI (using 20mm graded stone aggregate) RCC cover 1:2:4 type B1 including necessary reinforcement with recommended chemical compound to achieve less than 01 ohm etc complete all as show electric plate No. 3 of MES SSR Part-I, directed by Engineer-in-Charge.

Earth continuity conductor GI strip 32 x 6mm as main earthing lead fixed to wall or batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc as required.

Supply and fix GI tubing 100 mm 'light grade',galvanised, with all fitting; laid in trenches complete all as directed.

Supply and install inverter type hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air filter for better indoor air quality with minimum5 star rating and of capacity 1.5 ton on including suitable powder coated MS wall mounting stand and necessary core cutting of wall for passing copper pipe lines on wall as required at site.Make: : Blue star/Voltas/Daikin

Supply & install testing and commisioning Voltage stabilizer for automatic correction and operation single phase neatural air cooled window type and designed for input various between 170 to 250 V with output stabilizer at 230 volts with necessary +/-2.5% and capacity 4 KVA complete. Make: V-guard/ Miceotek/ K-Line

Supply and fixing, in replacement of company made sheet metal enclosure single pole & neutral with a two pin & earth metal clad plug and socket etc complete with one single pole MCB 20 Amps 240 Volts10 KA ‘C’ curve all as specified and directed. Make: LEGRAND/L&T/SCHNIEDER.

Shetty Construction Co

M/S GDR CONSTRUCTIONS

c devender reddy and co