REPAIR OF WOODEN STEEL FURNITURE INCLUDING PAINTING POLISHING AT NAUSHERA STATION UNDER AOR OF GE 862 EWS

Amount

REPAIR TO CHAIR DINING'S (DRG NO. FD-279/1105) M&L for removal of the existing damaged/broken rear leg (any one) of the chair dining and replacing with new rear leg made to shape of 1st class hard wood well seasoned with the upper end of the leg corner duly chamfered, fixed and complete all as shown on drg and as specified and directed.

Description all as per item No 01.00 here-in-before but front leg (left or right).

Description all as per item No 01.00 here-in-before but side rail (front, rear & left/ right ).

Description all as per item No 01.00 here-in-before but replacement of back rail.

Description all as per item No 01.00 here-in-before but replacement of stiffner.

Description all as per item No 01.00 here-in-before but replacement of back strip

S&F for PVC Hard rubber/shoe ring of 20mm dia of superior quality as per sample fixing with screw of suitable size complete all as specified and directed.

M&L for removal of old unserviceable plastic cane and recanning of chair with new 3mm wide plastic cane of best qulaity in matt pattern complete all as specified and directed.

M&L for preperation of new / old surface and two or more coats of french polishing to all exposed surface of chair dining with high class french polish and matching the new components with old surfaces complete all as specified and directed.

REPAIR CHAIR EASY (DRG NO. FD-229 / 1108) M&L for removal of the existing damaged/broken rear leg (any one) of the chair easy and replacing with new rear leg made to shape of 1st class hard wood well seasoned with the upper end of the leg corner duly chamfered, fixed and complete all as shown on drg and as specified and directed.

Description all as per item No 2.00 here-in-before but front leg (left or right).

Description all as per item No 2.00 here-in-before but side rail of seat frame.

Description all as per item No 2.00 here-in-before but front or back rail of back frame.

Description all as per item No 2.00 here-in-before but side rail of back frame.

Description all as per item No 2.00 here-in-before but top or bottom rail of back frame.

Description all as per item No 2.00 here-in-before but replacement of front support rail.

Description all as per item No 2.00 here-in-before but replacement of arm rest.

S&F for PVC Hard rubber/ shoe ring of 20mm dia of superior quality as per sample fixing with screw of suitable size complete all as specified and directed.

M&L for removal of old unserviceable plastic cane and recanning of chair with new 3mm wide plastic cane of best qulaity in matt pattern complete all as specified and directed.

M&L for preperation of new / old surface and two or more coats of french polishing to all exposed surface of chair easy with high class french polish and matching the new components with old surfaces complete all as specified and directed.

REPAIR TO CHAIR VERANDAH (DRG NO. FD-19) M&L for the preperation of old painted surface of chair and applying one coat of synthetic enamel paint of white shade over all exposed sufaces of chair verandah after preparation of surfaces complete all as specified and directed.

S&F for PVC Hard rubber shoe of 25mm dia of superior quality as per sample fixing with screw of suitable size complete all as specified and directed.

M&L for removal of old unserviceable plastic cane and recanning of chiar with new 3mm wide plastic cane of best qulaity in matt pattern complete all as specified and directed.

REPAIR TABLE DINING 6 PERSONS (DRG NO FD-273) M&L for top of table dining made of 18mm thick pre-laminated particle board(exterior grade) BWR with one side laminated and other side balancing white of size 1800mm x 900mm including 18mm wide x, 4mm thick teak wood beading on all round after removing of old broken / damaged top of dining table complete all as per drg and as specified and directed.

M&L for removal of the existing damaged/broken leg (any one) of the table dining and replacing with new leg made to shape of 760mm x 55mm x 35mm of 1st class hard wood well seasoned , fixed and complete all as shown on drg and as specified and directed.

M&L for removal of the existing damaged/broken long rail (any one) of the table dining and replacing with new long rail made to shape of existing size of 1st class hard wood well seasoned , fixed and complete all as shown on drg and as specified and directed.

M&L for removal of the existing damaged/broken short rail (any one) of the table dining and replacing with new short rail made to shape of existing size of 1st class hard wood well seasoned , fixed and complete all as shown on drg and as specified and directed.

S&F of new bracket of size 100x100x30mm made of first class hard wood and fixing with 02 Nos of suitable size steel screws, complete all as specified and directed.

M&L for preperation of new / old surface and two or more coats of french polishing to all exposed surface of table dinnging with high class french polish and matching the new components with old surfaces including filling of cavaties with wooden putty, complete all as specified and directed.

REPAIR TO BED HARD (DRG NO- FD-246) M&L for top of Bed Hard with 12 mm thick 7 Nos ply (Commercial type plywood both side) phenol bonded BWR grade, preservative, treated termite resistant and confirming to IS : 303 duly fixed on the top of size 1980mm x 900mm wide (single piece) with 35mm wooden screw after removing of old existing broken/damaged plywood top from the bed frame all as per drg and specified.

M&L for head board of 4mm thick veneered plywood having one side teak finish after removal of old existing broken/damaged head board complete all as specified and directed.

M&L for foot board of 4mm thick veneered plywood having one side teak finish after removal of old existing broken/damaged foot board complete all as specified and directed.

M&L for leg of bed hard after removal of old existing broken/ damaged leg of bed hard as per drg. (Timber shall be provided with 1st class hard wook well seasoned), complete all as specified and directed.

M&L for preperation of new / old surface and two or more coats of french polishing to all exposed surface of hard bed with high class french polish and matching the new components with old surfaces including filling of cavaties with wooden putty, complete all as specified and directed.

REPAIR TO ALMIRAH LARGE (STEEL) & ALMIRAH MEDIUM (STEEL) (DRG NO FD- 1032 & 1031) M&L in replacenent for mild steel lock (6 levers brass), 50mm size with duplicate stainless steel key and key hole cover as per sample of almirah steel medium fixing with suitable machine screws with fully operational with the existing locking device complete all as specified and directed.

Description all as per item No 6.00 here-in-before but for almirah large steel.

M&L in repair for chromium plated mild steel handle 100mm long (heavy duty) as per sample of almirah steel large/medium fixing with suitable nut to make functional in serviceable condition complete all as specified and directed.

M&L for applying one coat of enamel paint silver Ash / Grey hammer tone finish with spray gun painting machine after preparation of existing painted steel surfaces and removal of existing wornout paint from inside and outside, of any width or girth with emery paper etc including necessary denting wherever required with applying putty and smooth the surfaces for almirah steel large with shelves complete all as specified and directed.

M&L for applying one coat of enamel paint silver Ash / Grey hammer tone finish with spray gun painting machine after preparation of existing painted steel surfaces and removal of existing wornout paint from inside and outside, of any width or girth with emery paper etc including necessary denting wherever required with applying putty and smooth the surfaces for almirah steel medium with shelves complete all as specified and directed.

CHARPOY (GI PIPE) 32MM PLYWOOD TOP (DRG NO. FD- 220) M&L for 32mm dia new GI pipe (medium grade ) of 1980mm long as in long rail of GI pipe charpoy conforming to IS : 1239 having threaded portion 22mm long on both sides after removing of old damaged long rail complete all as per drawing and as directed.

Removing of old unserviceable short rail from GI charpoy and replacing the same with short rail converted from long rail obtained from ser Item No 7.00 here-in-before including thearded portion 22 mm long on both side complete all as specified and directed.

M&L for 32mm dia(medium grade) GI three way new elbow (weight not less than 450 gms) conforming to IS:1239 with GI check nuts of 32mm dia, hexagonal shaped after removing of old damaged/unserviceable 32mm diaGI three way elbow with nuts all as specified and directed.

Removing of unserviceable legs from GI charpoy and replacing the same with leg converted from short rail obtained from ser Item No 7.01 here-in-before including thearded complete all as specified and directed.

S&F for mild steel round disc of 40mm dia and 3mm thick duly welded alround to bottom of leg including removing of old unserviceable broken disc complete all as specified and directed.

Replacement of existing unserviceable plywood top of Charpoy GI plywood, supply and fixing 12mm thick BWR plywood (ISI marked) , 7 ply of both side commercial of size 1980mm long and 900mm wide (single piece) and provision of MS Flat iron of size 40mm x 6mm thick, 900mm long -02 Nos alongwith plwood top and fixed with 6mm dia 65mm long brass coated nuts & bolts with 02 Nos washers including drilling 02 Nos holes on each long rail and 02 Nos holes on each short rail and 02 Nos holes on each MS Flat iron complete all as specified and directed. (Note :- Original purchase voucher (Bar Code required) shall be submit by the contractor at the time of payment).

CHARPOY STEEL HARD TOP (Drg No FD/CWE-05/2014) Replacement of exisiting unserviceable plywood top from Charpoy steel hard top and supply and fixing plywood top by using 12mm thick, 7 ply of both side commercial BWR grade (ISI marked) of size 1850mm long and 850mm wide (single piece). Plywood shall be fixed with nut , bolts & washers complete all as specified and directed.

M&L for prepartion of old painted surface and applying one coat of black synthetic enameled paint to charpoy steel hard top including welding of broken parts duly painted complete all as specified and directed.

LOCKER BED SIDE STEEL (DRG NO-1029) M&L for chromium plated mild steel handle (2 Nos of heavy duty) as per sample of locker bed side with fitting to make functional in serviceable condition as in repair, complete all as specified and directed.

S&F in repair for 75mm long stainless steel hasp & staples as per existing complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint silver Ash / Grey hammer tone finish over a coat of red oxide primer (Ist quality) with spray gun painting machine after preparation of existing painted steel surfaces and removal of existing wornout paint from inside and outside, of any width or girth with emery paper etc including necessary denting wherever required with applying putty and smooth the surfaces for locker bed side complete all as specified and directed. (Note: Painting work to be done in units as well as furniture yard of GE 862 EWS, complete all as specified and directed)

REPAIRS TO CHAIR WRITING (DRG NO FD-280) M&L for removal of the existing damaged/broken front leg (any one) of the chair writing and replacing with new front leg made to shape of 660mm x 55mm x 30mm of 1st class hard wood well seasoned with the upper end of the leg conrner duly chamfered, fixed and complete all as shown on drg and as specified and directed.

M&L for removal of the existing damaged/broken rear leg (any one) of the chair writing and replacing with new rear leg made to shape of 890mm x 55mm x 30mm of 1st class hard wood well seasoned with the upper end of the leg conrner duly chamfered, fixed and complete all as shown on drg and as specified and directed.

M&L for removal of the existing damaged/broken bottom stiffner of the chair writing and replacing with new stiffner made to shape of 505mm x 25mm x 20mm/ 470mm x 25mm x 20mm of 1st class hard wood well seasoned, fixed and complete all as shown on drg and as specified and directed.

M&L for removal of the existing damaged/broken top back rest of the chair writing and replacing with new top back rest made to shape as per existing of 1st class hard wood well seasoned with the shape by slightly concaving, fixed and complete all as shown on drg and as specified and directed.

M&L for removal of the existing damaged/broken arm rest (any one) of the chair writing and replacing with new arm rest made to shape of 470mm x 60mm to 55mm through tapering x 25mm thick of 1st class hard wood well seasoned , fixed and complete all as shown on drg and as specified and directed.

S&F for PVC Hard rubber shoe/ ring of 20mm dia of superior quality as per sample fixing with screw of suitable size complete all as specified and directed.

M&L for removal of old unserviceable plastic cane and recanning of chair with new 3mm wide plastic cane of best quality in matt pattern, complete all as specified and directed.

M&L for preperation of new / old surface and two or more coats of french polishing to all exposed surface of all type of chair writing with high class french polish and matching the new components with old surfaces including filling of cavaties with wooden putty, complete all as specified and directed.

TABLE OFFICE CLERK STEEL (DRG NO FD-1004) M&L for new table top of table office clerk steel size 1370mm x760mm x 18mm thick pre-laminated particle board (exterior grade ), BWR , with teak veneer finish on both side including teakwood beading of size 18mm x 4mm all round with smooth finish duly polished with high glossy polish as specified and fixed with the frame of table with screws complete all as specified as in repair and as directed by Engr-in-Charge.

M&L for applying two coats of synthetic enamel paint silver Ash / Grey hammer tone finish over a coat of red oxide primer (Ist quality) with spray gun painting machine after preparation of existing painted steel surfaces and removal of existing wornout paint from inside and outside, of any width or girth with emery paper etc including necessary denting wherever required with applying putty and smooth the surfaces for table office clerk steel complete all as specified and directed.

M&L in repair for mild steel lock (4 levers brass) of table drawer as per existing with duplicate stainless key duly fixed to the front of the drawer complete all as specified and directed.

S&F in repair for PVC Hard rubber shoes of 40mm dia of superior quality having metal washer fitted in side as per sample complete all as specified and directed.

TABLE WRITING (DRG NO FD-275) S&F for top of table writing made of 18/19mm thick pre-laminated particle board (exterior grade) BWR with one side decorative choice and other side balancing white of size as per shown on drg including 18mm wide x 4mm thick teak wood beading on all round after removing of old broken / damaged top of table writing complete all as per drg and as specified .

M&L for removal of the existing damaged/broken leg (any one) of the table writing and replacing with new leg made to shape of 1st class hard wood well seasoned , fixed and complete all as shown on drg and as specified and directed.

Description all as per item No 12.01 here-in-before but long rails.

Description all as per item No 12.01 here-in-before but short rails.

S&F for new locking device as per existing drawer with 3 keys complete after taking down existing unserviceable lock of table wirting (Drg No FD-275).

S&F for PVC Hard rubber shoe/ ring of 20mm dia of superior quality as per sample fixing with screw of suitable size complete all as specified and directed.

M&L for preperation of new / old surface and two or more coats of french polishing to all exposed surface of all type of table writing with high class french polish and matching the new components with old surfaces including filling of cavaties with wooden putty, complete all as specified and directed.

REPAIRS TO TABLE OFFICE OFFICER STEEL (DGR NO-FD-1003) M&L for new table top of table office officer steel size 1680mm x870mm x 18mm thick pre-laminated particle board (exterior grade ), BWR , with teak veneer finish on both side including teakwood beading of size 18mm x 4mm all round with smooth finish duly polished with high glossy polish as specified and fixed with the frame of table with screws complete all as specified as in repair and as directed by Engr-in-Charge.

M&L for applying two coats of synthetic enamel paint silver Ash/ Grey hammer tone finish with over a coat of red oxide primer (Ist quality) with spray gun painting machine after preparation of existing painted steel surfaces and removal of existing wornout paint from inside and outside, of any width or girth with emery paper etc including necessary denting wherever required with applying putty and smooth the surfaces for table office officer steel, complete all as specified and directed

M&L for mild steel lock (4 levers brass) of table drawer as per existing with duplicate stainless key duly fixed to the front of the drawer as in repair .

S&F for PVC Hard rubber shoes of 20mm dia of superior quality having metal washer as per sample fixing with screw of suitable size complete all as specified and directed.

REPAIR TO CHAIR WRITING WITH CUSHION (DRG NO FD-1107) M&L for removing / taking out of old existing unserviceable broken back leg of of chair in any position and S&F new back leg made of 1st class hard wood all as shown on drg, complete all as specified and directed.

Description all as per item No 14.00 here-in-before but front leg (left or right).

Description all as per item No 14.00 here-in-before but side rail (left/ right )

Description all as per item No 14.00 here-in-before but replacement of back rail.

Description all as per item No 14.00 here-in-before but replacement of stiffner

Description all as per item No 14.00 here-in-before but replacement of back strip

S&F for PVC Hard rubber/ shoe ring of 20mm dia of superior quality as per sample fixing with screw of suitable size complete all as specified and directed.

M&L for preperation of new / old surface and two or more coats of french polishing to all exposed surface of chair writing with high class french polishing including filling of cavaties with wooden putty, complete all as specified and directed.

Removing / taking out of unserviceable foam seat frame and S&F new foam seat made up of 30x35mm wooden frame with 50mm thick foam cushion 32 density with leatherite cloth shall be provided covering the seat frame of high quality approved by GE, complete all as specified and directed.

Removing / taking out of unserviceable foam seat frame and S&F new foam seat made up of 20x30mm wooden frame with 50mm thick foam cushion 32 density with leatherite cloth shall be provided covering the seat frame of high quality approved by GE, complete all as specified and directed.

REPAIR TO CHAIR CB STEEL TUBLAR WITH ARMS (DRG NO-FD 75(M) M&L for removal of old unserviceable seat and back and supply and fixing of new seat and back as shown on drg and, complete all as specified and directed.

M&L for removing/ taking out of old existing unserviceable arm rest handle of chair in any position and S& F new arm rest handle of 1st class hard wood with 02 Nos of suitable steel screew all as shown on drawing, complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint (1st quality of approved colour) with spray gun painting machine after preperation of existing painted steel surfaces and removal of existing wornout paint of any width or girth with emery paper etc including necessary denting wherever required with applying putty and smooth the surfaces for chair CB Steel tublar with arms, complete all as specified and directed.

POLISHING (Drg No FD-375) M&L for two or more coats of french polishing applied over wooden surfaces of table centre after preparation of exposed wooden surfaces and smooth the surface with sand paper or caustic soda or chemically where necessary, joints and cracked of wooden parts of furniture items to be filled with wax/ pucca putty to make up for smooth surfaces as shown in drawing. The spririt and shellac should be superior quality and should not have any stain of water then finished complete all as specified and directed. Note: Polishing work to be done in units as well as furniture yard of GE 862 EWS as directed by Engr-in-Charge).

Description all as per item No 16.00 here-in-before but for table bed side (Drg No FD-276).

Description all as per item No 16.00 here-in-before but for peg table (Drg No FD-277 & FD-384).

Description all as per item No 16.00 here-in-before but for teapoy (Drg No FD-278 & FD-382).

Cushion of Sofa (FD-373) M&L for removing the worn out/ decayed/ unserviceable existing upholtered cushion from the seat and back of sofa and replacing the same with the new cushion of 100mm thick, 530mm x 560mm size, 40 density approved by GE duly covered all round and stitched all round with malmal cloth (white) over which is to be covered and stitched with approved quality of tapestry cloth (cost of tapestry cloth not less than rupees one hundred eighty per meter as approved by GE with piping alround teh edges all as shown in drg and as specified and directed

PACHNANDA BUILDERS (BID ID -3333343)

VEE KAY IND (BID ID -3320415)

M/S PARSHOTAM KUMAR GUPTA (BID ID -3325480)

PUSHPAK INDUSTRIES (BID ID -3325339)

M/S HARSON ENTERPRISES (BID ID -3324616)