15 FC Un-Tied IInd installment 2024-25

Amount

Earthwork excavation an all soils and soils except hard rock requiring blasting with initial lead and lift including re-filling the sides of foundation in layer of 15cm thick watering, ramming, depositing the surplus earth in the premises as directe

Plain Plain Cement Concrete 1:4:8 Mix (one part cement, Four part sand and Eight part of aggrigate) using 40mm size ISS HBG metal including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as

Supplying and errecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using M.S Sheets of size 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete Complying with Standard Specification as per TNDSS No.90(S3),86,86A,V,VI,(S3),VII (For Drain,Deck slab & Retainingwall)

Plain Plain Cement Concrete 1:2:8 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete asper TNDSS NO:28 & VI (S2) VI (S5A) VII Standard Specification as directed by Engineer incharge

Finishing the top of flooring with granothantic flooring with cement concrete 1:2:4 (one cement, two M-sand and four aggrugate) using 10 to 12mm stone chips - 25mm tk ete., Complete

Reinforced Cement Concrete 1:1 1/2 :3 Mix (One pert Cement, One and Half Part sand and Three part of aggregate ) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all metarials to site, loading and unloading ch

Supplying fabricating and placing in position of steel rods using M.S or Ribbed Tor Steel including cost of binding wire, cost of labour charges for fabrication and placing in position ete. Complete. Complying with std. specifications.

Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 63mm thick (table clauses 5 and 9.14) suitable for bus terminals ,industrial complexes, road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 63mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over Stone dust of 100mm thick (excluding the cost of M- Sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the M- Sand to paver block etc., complete ISI 15658-2006.

MP CONSTRUCTION (BID ID -1273059)