GE(N)/M-52/2021-22

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as spd.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as spd.

Box type steel windows & ventilators comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint all as specified.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint all as specified. all as specified.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 75x50 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint all as specified. all as specified.

M &L for 18 to 20 mm thick prelaminated PVC solid board with one side decorative choice 1mm thick laminated and other side balancing white (minimun wt 9 Kg/Sqm) as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed.

M &L for 2nd class hard wood 35 mm thick plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats all as specified and directed

M &L for 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided) complete all as specified and directed

M & L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L two coats of synthetic enamel paint on old steel surfaces of any description, n.exc 10 Cms in width or girth, including preparation of surfaces, complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used instead f plain colour PVC sheet & edges will be painted to matc wit printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick (Stile) with 2,4 or 6 raised panel design with 2mm thick moulded woodgrain coloured prelaminated PVC sheet on the front face & 2mm plain colour prelaminated PVC sheet on back face all as specified and directed .

M&L Repair to Old steel window shutter not exc 1 Sqm incl replacement of unserviceable hinges, Handle, and necessary welding to shutter & chowkhat for making window in serviceable condition and including of painting of old window Complete all as specified and directed.

Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips Complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, orstainless steel wire staples all as specified & directed.

S&F in repair to Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, orstainless steel wire staples all as specified & directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed.

S&F 3 mm thick Figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane Complete all as specified and directed.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified and directed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified and directed.

S&F 300 mm MS Rat tail door spring for door closer,complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor Overall length of cover plate 150mm complete all as specified and directed.

S&F 2nd class Small fitting such as brackets of any type, latch & hinge blocks, shaped door & window stops & the like including all necessary labours; articles n exc 200cu.cm each omplete all as specified and directed.

S & F Peg set of Six powder coated fixed with chromium plated brass screws and wooden and plastic cleats ( min wt 190 gms) complete all as specified.

S&F in repair 25mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC powder coated brackets, funnels etc suitable for single curtain rod, fixed in repair, etc complete all as specified and approved by GE.

Brick work with Fly Ash Brick (Non-Modular) straight or curved on plan exceeding 6m mean radius built in CM (1:6) including dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc and removal of rubbish out off the premises, etc complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed.

Rendering 15mm thick in two layers (base layer 10mm & finishing layer 5mm thick) in cement mortar (1:4) using liquid water proofing compound in finishing layer on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement, etc complete all as specified & directed. (Note : WPC shall be measured and paid separately)

M&L for rendering or plastering work 10 mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed.

Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and applying two coat of cement base paint incl curing over priming the surface with alkali resistance primer paint complete all as specified & directed.

M&L Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and two coats of distemper oil emulsion over a coat of primer of new surfaces complete all as specified and directed

M&L two coats of distemper oil emulsion over primer coat after application of average 2mm thick wall care putty including removing of existing treatment of old wall surfaces complete all as specified and directed

M&L three coats of white wash on surface of wall including preparation of new plastered surface complete all as specidfied and directed.

M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as spd and directed.

Preparation of old surface after complete removal of existing treatment applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed.

M&L two coats of white wash on surface of wall including preparation of old plastered surface by washing rubbing, stopping brooming down with steel wire brushing scrapping down smoke roots, moulds salts and trading oil and greasy spots complete complete all as spd and directed.

M&L two coats of white wash on surface of ceiling including preparation of old plastered surface complete all as spd and directed.

Preparation of old surface after complete removal of existing treatment making the surface smooth and applying two coat of cement base paint over a coat of alkali-resistant priming paint all as specified & directed.

GI wire netting 0.90mm dia & 12mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc. including all laps, cutting & waste complete all as specified and directed.

M&L Marble work 15 mm to 28 mm thick (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match with marble shade of chitter black over 15 mm thick cement screed in CM 1:4 including Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm all as spd & directed.

Round chamfering, to the edges of granite n.exc 15mm wide on granite stone shelves complete all as specified.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed.

M&L cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified.

25mm thick cement concrete (1:2:4) type B-0, as leveling course in flooring (using 12.5mm graded crushed stone aggregates) surface finished even and rough to receive floor topping etc complete all as specified and directed.

M&L for Industrial grade tiles matt finish (type-V), thickness 10 mm floor tile of size area exc 0.18 Sqm but not exc 0.36 Sqm, set and jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 15mm thick backing coat in 1:4 (surface finished even and rough to receive tile) including demolition of existing surface with screed bed complete all as specified and directed.

M&L for Industrial grade tiles matt finish (type-V), thickness 10 mm floor tile of size area exc 0.18 Sqm but not exc 0.36 Sqm each as in skirting and like that, set and jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 10 mm thick backing coat in 1:3 (surface finished even and rough to receive tile) including rubbing and polishing including dismantling existing plastering/tiles and removal of debris out of premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes including dismantling existing plastering/tiles and removal of debris out of premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting/dado/risers of steps etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. incl rendering 10mm thick in CM (1:4) and finished rough, incl taking down cement plaster on walls etc complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, incl taking down of plastering complete all as spd & directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as specified

M&L cutting chases pinning in brick mas and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as specified .

S & F in repair Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and directed.

S & F in repair Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia in repair, complete all as specified and directed.

S&F in repair Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed in repairs of Make - Jaquar , Marc and Johnson complete all as spd and directed.

S&F in repair towel rail CP 600 mm long complete all as specified and directed.

S& F in repair CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as spd and directed.

S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern ( including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified and as directed.

S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as spd & directed.

S&F stainless steel kitchen plate rack of size 750 x 900 mm of approved make fixed with mild steel screw complete all as spd & directed.

Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified & directed.

S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore.

S&F in repair CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified.

Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified & directed .

S&F PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints , in any length fixed to walls complete all as specified & directed

S&F PVC (SWR) bend any radius 110mm dia bore complete all as specified & directed .

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed.

M&L PCC 1:2:4 type B-0 padding as roof , surface finished even and smooth without using extra cement

M & L for cement concrete (1:2:4) type " B1 " ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets,benching, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified and directed. ( Item also applied in broken RCC chajjas and roof projection )

M&L 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed

APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification complete all as directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufactured by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane, Physical property of membrane shall be as under :- (i) Membrane weight not less than 3.60 Kg/Sqm. (ii) Non woven polyester weight not less than 160 gsm/Sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650/Sqcm and transverse not less than 450/sqcm at 230 degree Celsius. (v)Tear strength - longitudinal not less than 300 N & transverse not less than 250N. (vi) Elongation of reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3 Kg/Sqcm. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Supply only liquid water proofing compound complete all as specified.

Excavation and trenches n. exc 1.5 m wide and n.exc 1.5m in depth for foundation of manhole, as in any type of soil complete all as specified and directed.

Returning filling in including spreading, levelling,watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding and depositing where directed at a level not exceeding 1.5m above the starting point and disposal complete all as specified and directed.

-ditto- but distance exc 250m but n exc 500 m

M&L PCC 1:4:8 type D-2 (using 40mm graded aggr) as in fdn filling and mass concrete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc.

Concrete bed 100mm thick to drain pipe 200mm bore including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 (Using 40mm graded crushed stone aggregate) including taking down existing CI / PVC pipe, etc complete all as specified and directed. etc complete all as specified & directed.

M&L 200 reinforced cement concrete pipes class NP2 with one collar per length of pipe complete all as spd & directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil , complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 as in subbase to flooring complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L Precast interlocking paver blocks factory made confirming to IS-15658-2006 of 60mm thick grade of concrete M-35 with cement and coloured pigment (topping thickness not less than 5mm thick with white cement and colour pigment non fadable with epoxy coating )complete all as specified and directed .

M&L False ceiling of not less than 6mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm of manufacturer M/s Saint Gobain or equivalent of Armstong/Everest including taking down existing ceiling board & grid work etc of any type/pattern complete.

Dismantling of rolled mild steel as in tubular purlins, rafters etc and refixing of purlins, rafters on trusses including necessary cleats etc. including two coats of synthetic enamel paint after preparation of old steel surface complete all as specified and as directed.

M& L steel iron base plate angle iron beem plugs, bolts, and screws of Fe 410-W (Gde-E-250 Quality -A) complete all as specified and directed.

S&F structural tubular steel works as in trusses, rafter, purline, posts, special shaped washer etc complete using ERW or induction butt welded tubes conforming toIS-1161-1979 GRADE st-240 including dismantling structual steel works Complete all as specified and directed.

S&F rolled mild steel sec as in main and cross beams rafter prline where connected to commen rafter and running rails conforming to Fe-410-W GRADE E-250 including dismantling structual steel works Complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including dismantling of existing sheets complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified.

M&L Preparation of old or untreated steel sufaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed .

Mild steel work using angle and flat iron section in frame for Desert cooler stand and similar work conforming to Fe 290 (Gde E-165) including welding and application of two coats of synthetic enamel paint over a coat of red oxide primer on exposed surface, etc complete all as specified and directed.

Dismantling of existing precast cement concrete block masanory of any description and reset again (except blocks) in CM (1:4), complete all as specified and directed

M&L mild steel TMT bars 5 to 8mm dia cut to length, bent to shape required incl crancking bending and hooping ends for stirrups all as spd and directed.

M&L Mild steel TMT bars10 mm dia and over cut to length, bent to shape required incl crancking bending and hooping ends all as spd and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed.

Extra for forming fair finished channel or drain up to 60 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends etc. all as directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping/benching of drain and the like including necessary form work weathering rounded or chamfered angles, throating including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on brick/concrete surfaces finished even and smooth without using extra cement all as directed.

M&L cement concrete 1:2:4 type B0 (using 20mm graded aggregate) in surfaces channels and drains all as specified.

Form work to sides of square of rectangular column, footing side of hume pipe concrete etc specified and as directed.

Excavation in post holes or similar holes each not exceeding 0.5 Cum , getting out, returining, filling in and rammed earth or broken rubble mixed with earth around, in layers n exc 35 cm watering and removing surplus soil to a distance n exc 50 m and making good in any type of soil complete all as specified and directed.

Dismantling of fencing wire mesh any type complete all as spd & directed.

Dismantling posts or struts (wood, steel or RCC) any section, incl taking out embeded portion and making good disturbed ground complete all as spd & directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in RCC Post holes complete.

S&F Tie bars welded to angle iron post conforming to Fe-290 Gde E- 165 complete.

S&F Mild steel works for posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iorn fillets (for securing wire mesh etc) incl all necessary drilling , bolting or welding / riveting, etc and similar work conforming to Fe-290 Gde -E-165 incl two coat of syntheitc enamal paint over 01 coat of pink primer all as spd and directed.

S&F mild steel screw bolts with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut , but length of bolt exc 10 cm and n exc 22.5cm long and diameter of neck 10 mm all as spd & directed.

Supply only Chain Link Fencing MS galvanised fencing 50mmx50mm size or type complete all as specified and directed.

Fixing only Chain Link Fencing including line wires, of 50mmx50 mm mesh, size and type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Galvanised 2 strand,steel barbed wire hot dip confirming to IS-278-1978 2.24 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails,straingiing bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed(each line wire to be measured)

M&L for Cement concrete 1:4:8 type D-2 using 40 mm graded aggregated as in foundation filling and mass concrete complete all as specified and directed.

M&L 75mm thick Cement concrete 1:2:4 type B-2 using 40 mm graded aggregated as in flooring completed all as spd & directed.

M&L Precast cement concrete (1:2:4) type B1 (using 20mm graded aggregate) in landings,cover slab ,manhole cover etc,water troughs,shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.

S &F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for Construction of Brick masonry Septic tank for 25 Users using sub class 'B' bricks (non modular) class 7.5 including inlet and outlet chamber complete all as shown in Drg No CEPZ/C-TD/013/13 sheet Nos 1/5 to 5/5 complete all as specified and directed.

M&L Soakage well, exc. In ordinary soil, foundation in PCC 1:3:6 , wells of Honey combed and Solid in M-25 Concrete, Incl Intercepting Chamber , screen Chamber Brick work in cement mortar , RCC cover slab in M-25/ RR masonry/ filling with brick bats, complete of Size 2.40 mtr dia X 3.00 mtr deep.(Drg No CEPZ/C-TD/013/13 sheet Nos 1/5 to 5/5)

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings dressed stone work etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces in even and smooth complete all as specified and directed.

Demilition of brick tiles or terracing tiles, single layer from roof laid,bedded and pointed in any mortar complete all as specified and directed.

M&L for 40mm thick fly ash brick tiles over torched APP membrane with joints grouted flush in cement mortar(1:3) mixed with 5% of crude oil by weight of cement over and including bedding layer of cement mortar 15mm thick in 1:4 with and including WPC etc complete all as specified and directed.

M&L for 40mm thick brick tiles (except brick tile) over torched APP membrane with joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement over and including bedding layer of cement mortar 15mm thick in 1:4 with and incl WPC complete all as specified and directed. (Brick tile retrieved form dismentiling to be reused in this work)

Taking down carefully unsv copper/aluminium point wiring ( light/fan/Bell/socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets and making good disturbed surfaces of walls , floors etc.

M & L for point wiring with 1.5 sqmm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable 1100 volts grade drawn through and including PVC rigid concealed conduit (ISI marked) with all accessories including sunken modular metal flush gang box with suitable support frame and cover plate (inner/outer) of required modules for mounting modular accessories including 1.5 sqmm FRLS PVC insulated unsheathed copper conductor multistranded cable earth conductor connected to common earth dolly, complete all as specified as directed for the following :- Note:- Proper colour coding is to be followed as per IS Specification.

One light point controlled by one switch 5 Amp, SP, one way 240 volts.

One Ceiling/Exhaust fan point controlled by one switch SP, one way, 5 Amp, 240 Volts .

One multi pin (3/5 pin) socket 5 Amp on same board.

One multi pin (3/5 pin) socket 5 Amp independent.

All as per item No 138 herein before but using 2.5 sqmm (nominal area) FRLS PVC insulated multistranded copper conductor cable & 2.5 sqmm size FRLS PVC insulated and unsheathed multistrandd copper conductor cable as earth conductor ( green colour) for one 6 pin socket outlet 15Amp multi purpose independent point controlled by 15 Amp switch SP, one way, 240 Volts, complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50mm, three terminals ISI(Marked) all as specified and directed.

S&F modular socket 6 Amp, 2/3 Pin multipurpose, 2 module, complete all as specified and directed. Make : Legrand/CrabTree/Anchor(Roma)/Havells/IndoAsian

S&F modular switch one way 6 Amp one module, front operated complete all as specified and directed. Make : Legrand/CrabTree/Anchor(Roma)/Havells/IndoAsian

S&F modular switch piano type flush button single pole 16 Amp one module, front operated. Make : Legrand/CrabTree/Anchor(Roma)/Havells/IndoAsian

S&F modular socket 6 Amp/16 Amp, 2/3 Pin multipurpose, 2 module, complete all as specified and directed. Make: Legrand/CrabTree/Anchor(Roma)/Anchor/IndoAsian

S & F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as spd and directed. Make: Legrand/CrabTree/Anchor(Roma)/Havells/IndoAsian

S&F in replacement sub Main Wiring with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit complete and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface all as specified and directed.

S & F in replacement SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC having copper bus bar of rating 200Amps complete all as specified and directed.

Lamp holder insulated body with back plate suitable for batten fitting including 15W LED lamp of approved make and cat part and PVC Round/Square block etc complete all as specifeid and directed.

S & F in replacement SPN MCB DB 12 way sheet metal enclosures double door 230 V AC, 50 Hz AC complete all as specified and directed.

MCB single pole with neutral 240 volts 40 Amps, 10KA (B-series) etc complete all as specified and directed.

S&F MCB SP 240V, 50Hz, 10 KA,of rating 5 to 32 Amp all as specified and directed.

S & F in replacement LED Bulk head 1 x 10 watt energy efficient wall mounted, pressure die cast aluminium housing & enclosed with poly carbonated cover with all accessories including LED lamp complete including connecting up with three core twisted flexible copper conductor cable of suitable size.Cat Part NoLHEXCGP7PN5W010 Make of - Havells equivalent make- philips, Bajaj' Crompton

S & F in replacement High efficiency LED 20W bix type batten fitting 4 feet long 6500K,2000 lumens having extruded aluminium housing and PC diffuser and mounting on PVC round/ square block complete with all accesssories internely pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size.Cat Part No- For LED tubeLHEXCEP7UN1W020 & Batten (Channel)LHFXCEP1TN1W020 Make of -Havells or Make - Equivalent in philips, Bajaj and CG

S&F LED Building light 1x25 watt made out of pressure die-cast aluminium with polycarbonate cover IP65 protection including 32mm bore GI pipe bracted mounted using clamps, nuts bolts, washers, fastners etc. Complete all as specifed and directed .Make Cat NoLHEWDRP7PN1W025 of Havells equivalent Halonex/Wipro

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section in service connections.

S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sq mm 2core. laid under ground, fixed along wall, through GI pipe under floor/Road including dismantling existing service cable of any size from electric pole to building, complete all as specified and directed.

M & L for sand filling in trenches dry and and clean sand unwashed including punning around cable for protection of under ground cable complete all as specified and directed.

M & L for well burned bricks , laid flat ( old size) sub class B designation 75 for cable protection copmplete all as specifed and directed.

M & L for tube , light grade galvanised of 40 mm bore with all fittings laid in trenches/through wall / under road/floor or pole by means of FI clamps, nuts bolts and washers complete all as specified and directed.

S&F LED street light with pressure die cast aluminium housing with polycarbonate cover, finless design, dedicated peanut optics, > 100 lumen/W system efficacy, minimum 3000 system lumens, 30W system wattage (including driver), color temperature > 5700K, CRI>80,IP65 protection, IK07 rating. The potted electronic driver with THD<10%, PF>0.95 including GI bracket of suitable dia, bend to shape and mounted on wall with suitable size of nut & bolts and making connection with three core twisted flexible copper cable of size 0.75 Sqmm complete all as specified and directed.

S&F wall mounted fan of size 400 mm sweep 230 V, 50 HZ, ISI Marked Complete with pool card high speed regulation system and complete mounting complete specified and directed. Make- Havells/CG/USHA /Khetan

Supply , installation ,commisioning and testing of heavy duty metallic exhaust fan with louvers, 220 volts 50Hz 1400 RPM 300 mm sweep including cutting of suitable size hole on existing wall and fixing exhaust fan by means of suitable size of anchor bolts and making good to disturbed surface matching and with existing surface complete all as per site requerment or as specified and directed. Make Havells /Bajaj//Usha/Anchor

S&F Fancy light with decorative wall mounted champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base complete all as specified and as directed.Make Havells Cat Pat No LHFOECE1TZ1O014 or equivalent in Bajaj,Philips

S & F in replacement edgelit LED slim panel having white powder coated extruded Aluminium body with high quality LGP and PMMA diffuser, separate HPF driver,suitable for Amstrong or Grid ceiling recess mounting luminaire size 2x2 feet, with High efficient 18 watt LED and glare free complete with all accessories internely pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size.Cat Part No- PMD0401018 of Poly cab make / Equivalent in philips, Bajaj, Havells and CG

M & L for earthing complete with G .l earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground ( earth pit not less than 2.25 m deep below GL ) with top edge of the plate not less than 1.5 m below the normal ground level connected galvanized earth lead wire 4.0 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50mtr, including PCC chamber in PCC (1 : 2 : 4), type B1, using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle , watering arrangement with funnel internally secured with wire mesh with 20 mm dia light grade GI pipe for watering, 15 mm dia medium grade Gl pipe for earth wire protection with and including alternate layer of charcoal dust and common salt. complete all as shown in electrical plate No 3 connected to DBs all as specified and indicated including testing on completion.

Deduct Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 70,324.50 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

M/S DUGGAL CONSTRUCTION CO

dadwal engineers

M/S SEVENUP

AV ENTERPRISES

M/s Rajeev Vashist