MMNPPNA_23_24_150 (i) Improvement of Bihpuria Narayanpur road at Daily Market to Bamun Gaon(Loknath Goswami path) Ch 0.00m to Ch 500.00m, (ii) Improvement of Road from Bihpuria Badati road to Kawoimari link road via Morichapathar from Ch.0.00m to

Amount

(Gaurav Path)Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to beused or auctioned up to lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm thickness as per technical specification clause 201. (I) By manuals means. A. In the area of non thorny jungle.

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 (Manual method should be adopted where machines can not be deployed due to site condition)

Scarifying existing granular surface to a depth of 50mm and disposal of scarified material with a lift upto 3.0m and lead upto 1000m as per Technical specification Clause 301.4

Construction of Embankment (Construction of embankment with approaved materials obtained from borrow pits with lifts and leads transporting to site, spreading,grading to required slope and compacted to meet requirement of table No. 300-2 with a lead upto 1000m as per Technical Specification Clause 303.1(I ) Private land

Construction of sub grade and earthen shoulders (Construction of sub gradeand earthen shoulders with approaved materials obtained from borrow pits with lifts and leads transporting to site, spreading,grading to required slope and compacted to meet requirement of table No. 300-2 with a lead upto 1000m as per Technical Specification Clause 303.1(I ) Private land

(A) By mix in Place Method :- Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. GR-II Materials

Using crushable screening such as moorum gravel for Gr.III Water Bound Mecadam Sub-Base/Base Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density density grading 2 (for Gr-II) as per Technical Specification Clause 405.

Using crushable screening such as moorum gravel for Gr.III Water Bound Mecadam Sub-Base/Base Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density density grading 3 (for Gr-III) as per Technical Specification Clause 405.

Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix and filler transporting the hot miox to work site,laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no. 507. complete in all respect. (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant )( Including cost of testing of materials at site and laboratory as directed by the deptt.)

Bituminous Concrete: Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.509. complete in all respect. (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant )( Including cost of testing of materials at site and laboratory as directed by the deptt.)

Kilometer Stone Reinforce cement concreter M15 grade kilometer stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and technical specification clause 1703 Ordinary KM Stone.

Kilometer Stone Reinforce cement concreter M15 grade kilometer stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and technical specification clause 1703 200 m stone (precast).

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801.ii.600mm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. iii 600mm circular

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. iv. 800mm x 600mm rectangular

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. v. 900mm side octagon rectangular

Providing and Fixing 'Logo' of PMGSY Project Providing and erecting direction and place identification retro-reflectorised signas per IRC:67 made of encapsulated lens type reflective sheeting vide Clause1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmlyfixed to the ground by means of properly designed foundation with M-15 gradecement concrete 450 x 450 x 600 mm, 600 mm below ground level as perapproved drawing and Technical Specification Clause 1701 (Qty.From Annx-I)

Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973 (Qty.From Annx-I)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specification

Providing Hump type speed breaker BM

Providing Hump type speed breaker SDBC

Improvement of Road from Bihpuria Badati road to Kawoimari link road via Morichapathar from Ch.0.00m to Ch.610.00m (L=0.61 KM) under Mukhya Mantrir Nagaria path Nirman Achani for the year 2023-24 in Bihpuria LAC. Supplying & installation of antique design Street Light for Gaurab Path through both sides of the road with underground cabling

Improvement of Road from Bihpuria Badati road to Kawoimari link road via Morichapathar from Ch.0.00m to Ch.610.00m (L=0.61 KM) under Mukhya Mantrir Nagaria path Nirman Achani for the year 2023-24 in Bihpuria LAC. Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to beused or auctioned up to lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm thickness as per technical specification clause 201. (I) By manuals means. A. In the area of non thorny jungle.

Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3.0m and lead upto 1000 m as per Technical Specification Clause 301.4

Construction of Embankment (Construction of embankment with approaved materials obtained from borrow pits with lifts and leads transporting to site, spreading,grading to required slope and compacted to meet requirement of table No. 300-2 with a lead upto 1000m as per Technical Specification Clause 303.1(I ) Private land

Construction of sub gradeand earthen shoulders (Construction of sub gradeand earthen shoulders with approaved materials obtained from borrow pits with lifts and leads transporting to site, spreading,grading to required slope and compacted to meet requirement of table No. 300-2 with a lead upto 1000m as per Technical Specification Clause 303.1(I ) Private land

Using crushable screening such as moorum gravel for Gr.III Water Bound Mecadam Sub-Base/Base Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density density grading 3 (for Gr-III) as per Technical Specification Clause 405.

Providing and laying Inter locking Concrete Block Pavement with M-40 grade of concrete block having thickness of 80 mm as per technical specification, clause 1504 complete including carriage. (a) Including Edge block/Edge restrain.

Kilometer Stone Reinforce cement concreter M15 grade kilometer stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and technical specification clause 1703 Ordinary KM Stone

Kilometer Stone Reinforce cement concreter M15 grade kilometer stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and technical specification clause 1703 200 m stone (precast)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. ii.600mm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. iii 600mm circular

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. iv 800mm x 600mm rectangular

Providing and Fixing 'Logo' of PMGSY Project Providing and erecting direction and place identification retro-reflectorised signas per IRC:67 made of encapsulated lens type reflective sheeting vide Clause1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmlyfixed to the ground by means of properly designed foundation with M-15 gradecement concrete 450 x 450 x 600 mm, 600 mm below ground level as perapproved drawing and Technical Specification Clause 1701

Improvement of Road from Bihpuria Badati road to SH-43 Link road from Ch.0.00m to Ch.255.00m (L=0.255 KM) under Mukhya Mantrir Nagaria path Nirman Achani for the year 2023-24 in Bihpuria LAC.Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to beused or auctioned up to lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm thickness as per technical specification clause 201. (I) By manuals means. A. In the area of non thorny jungle.

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 (Manual method should be adopted where machines can not be deployed due to site condition)

Construction of Embankment (Construction of embankment with approaved materials obtained from borrow pits with lifts and leads transporting to site, spreading,grading to required slope and compacted to meet requirement of table No. 300-2 with a lead upto 1000m as per Technical Specification Clause 303.1(I ) Private land

Construction of sub gradeand earthen shoulders (Construction of sub gradeand earthen shoulders with approaved materials obtained from borrow pits with lifts and leads transporting to site, spreading,grading to required slope and compacted to meet requirement of table No. 300-2 with a lead upto 1000m as per Technical Specification Clause 303.1(I ) Private land

(A) By mix in Place Method :- Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. GR-II Materials

Using crushable screening such as moorum gravel for Gr.III Water Bound Mecadam Sub-Base/Base Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density density grading 3 (for Gr-III) as per Technical Specification Clause 405.

Providing and laying Inter locking Concrete Block Pavement with M-40 grade of concrete block having thickness of 80 mm as per technical specification, clause 1504 complete including carriage. (a) Including Edge block/Edge restrain.

Kilometer Stone Reinforce cement concreter M15 grade kilometer stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and technical specification clause 1703 200 m stone (precast)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. ii.600mm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. iii 600mm circular

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. iv 800mm x 600mm rectangular

Providing and Fixing 'Logo' of PMGSY Project Providing and erecting direction and place identification retro-reflectorised signas per IRC:67 made of encapsulated lens type reflective sheeting vide Clause1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmlyfixed to the ground by means of properly designed foundation with M-15 gradecement concrete 450 x 450 x 600 mm, 600 mm below ground level as perapproved drawing and Technical Specification Clause 1701

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Excavation for Structures Ordinary soil Manual Means(with dewatering) Depth upto 3 m

Removable of Unserviceable Soil with Disposal upto 5 Km (Removable of unserviceable soil including excavation, loading and disposal upto 1000 metres and then upto (within a ditance of) 5 Km lead in suitable places )

Providing soling under floor at all levels with best quality bricks/stone and sand filling etc complete as directed. (B) 15 cm stone soling

Plain cement concrete 1:3:6 (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Supplying, fitting and placing uncoated TMT reinforcement Supplying, fitting and placing uncoated TMT reinforcement in foundation complete as per drawing and technical specification.

Plain/reinforced cement concrete in substructure complete as per drawing and technical specification. E. RCC Grade M-20 Height up to 5 m Using Concrete Mixer

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.

Backfilling behind abutment,wing wall and return wall completeas per Drawing & Technical Specification clause 1204.3.8

Construction of RCC Cross Drainage on Bihpuria to Badati Near LIC Office. under Mukhya Mantrir Nagaria path Nirman Achani for the year 2023-24 in Bihpuria LAC. Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Excavation for Structures Ordinary soil Manual Means(with dewatering) Depth upto 3 m

Removable of Unserviceable Soil with Disposal upto 5 Km (Removable of unserviceable soil including excavation, loading and disposal upto 1000 metres and then upto (within a ditance of) 5 Km lead in suitable places )

Providing soling under floor at all levels with best quality bricks/stone and sand filling etc complete as directed. (B) 15 cm stone soling

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. PCC 1:3:6 in Foundation

Supplying, fitting and placing uncoated TMT reinforcement in foundation complete as per drawing and technical specification.

Plain/reinforced cement concrete in open foundation complete as per drawing and technical specification. RCC Grade M-20.

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.

Backfilling behind abutment,wing wall and return wall completeas per Drawing & Technical Specification clause 1204.3.8

Construction of RCC Drain cum Footpath of size 0.70m x1.00 m 795.00m L=0.795 Km Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Excavation for Structures Ordinary soil Manual Means(with dewatering) Depth upto 3 m

Removable of Unserviceable Soil with Disposal upto 5 Km (Removable of unserviceable soil including excavation, loading and disposal upto 1000 metres and then upto (within a ditance of) 5 Km lead in suitable places )

Providing soling under floor at all levels with best quality bricks/stone and sand filling etc complete as directed. (B) 15 cm stone soling

Plain cement concrete 1:3:6 (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Supplying, fitting and placing uncoated TMT reinforcement Supplying, fitting and placing uncoated TMT reinforcement in foundation complete as per drawing and technical specification.

Plain/reinforced cement concrete in substructure complete as per drawing and technical specification. E. RCC Grade M-20 Height up to 5 m Using Concrete Mixer

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.

Backfilling behind abutment,wing wall and return wall completeas per Drawing & Technical Specification clause 1204.3.8

Improvement of Road from Bihpuria Daily Market to Bamun Gaon from Ch.500.00m to Ch.1380.00m (L=0.880 KM) under Mukhya Mantrir Nagaria path Nirman Achani for the year 2023-24 in Bihpuria LAC. Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to beused or auctioned up to lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm thickness as per technical specification clause 201. (I) By manuals means. A. In the area of non thorny jungle.

Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202. Above 900 mm dia Hume pipe

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification Clause 202. Rubble Stone Masonry in Cement Mortar

Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3.0m and lead upto 1000 m as per Technical Specification Clause 301.4

Construction of Embankment (Construction of embankment with approaved materials obtained from borrow pits with lifts and leads transporting to site, spreading,grading to required slope and compacted to meet requirement of table No. 300-2 with a lead upto 1000m as per Technical Specification Clause 303.1(I ) Private land

Construction of sub gradeand earthen shoulders (Construction of sub gradeand earthen shoulders with approaved materials obtained from borrow pits with lifts and leads transporting to site, spreading,grading to required slope and compacted to meet requirement of table No. 300-2 with a lead upto 1000m as per Technical Specification Clause 303.1(I ) Private land

Using crushable screening such as moorum gravel for Gr.III Water Bound Mecadam Sub-Base/Base Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density density grading 3 (for Gr-III) as per Technical Specification Clause 405.

Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Semi - Dense Bituminous Concrete: Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. including carriage of mixed materials up to 10.0 Km initial lead from mixing plant ) (Including cost of testing of materials at site and laboratory as directed by the deptt.)

Kilometer Stone Reinforce cement concreter M15 grade kilometer stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and technical specification clause 1703 Ordinary KM Stone

Kilometer Stone Reinforce cement concreter M15 grade kilometer stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and technical specification clause 1703 200 m stone (precast)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 ii.600mm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 iii 600mm circular

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 iv 800mm x 600mm rectangular

Providing and Fixing 'Logo' of PMGSY Project Providing and erecting direction and place identification retro-reflectorised signas per IRC:67 made of encapsulated lens type reflective sheeting vide Clause1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmlyfixed to the ground by means of properly designed foundation with M-15 gradecement concrete 450 x 450 x 600 mm, 600 mm below ground level as perapproved drawing and Technical Specification Clause 1701

CD WORKS (HP Culverts) Excavation for structures :- E/W in excavation for structures as per drawing and Technical specification Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and deleterious materials and disposal upto a lead of 50

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203(1:3:6) M-15

Beding of Pipe (ii) Type B(First Class beeding) Laying First Class Beeding on well compacted sand, moorum or approved granular materials

Providing concrete for plain/reinforced concrete in open foundation complete as per drawing & technical specifications.A. with crushed stone III.PCC M-20 grade (1:2:4) Hand mixed.

Providing & Laying reinforced cement concrete pipe NP-3 for culverts on 1st class bedding of granular material in single row including fixing coller with cement morter 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works

KHAGEN HAZARIKA