8371 SPECIAL REPS TO BLDG NO P62 P63 P64 AT KTB UNDER GE TVL

Amount

Demolition of brick tiles or terracing tiles, single layer on roofs including cement screed in roof complete all as specified and directed.

Removal of existing APP membrane and bitumen coats on roof surfaces and removing from the site complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for padding concrete upto existing RCC roof top complete all as specified and directed.

Material and labour for providing cement concrete of type B-1, 1:2:4 (20mm graded aggregate) with water proofing compound @2% by weight of cement even and fair surface complete all as specified and directed. Note:- water proofing compound shall be measured and paid separately.

Material and labour rendering 10mm thick plastering on fair faces of concrete surface in CM 1 : 4 with water proofing compound @ 2% by weight of cement finished even and fair complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.

Material and labour APP based polymeric water proofing membrane minimum weighing 3Kg/ Sqm minimum 3 m thick reinforced with polyster non-woven fabric (weight not less than 150 gms/Sqm) laid over roof surfaces by priming/tack coat with bituminous primer at the rate of 0.50 ltr / Sqm by forced application and vertical surfaces up to grooves and width of overlap 75mm at the sides and 100mm in ends and applying coat of hot blown bitumen 85/25 at the rate of 1.20 Kg per Sqm over APP membrane complete all as specified and as directed.

Supply only integral Water Proofing compound.

Supply and fixing in repair 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 2 layered ISI marked, complete all as specified in SSR Pt- I.

Supply and fixing in repair of ball brass valve, high pressure with polythene float and fly nut,screwed for iron pipe or brass ferrule of size 25 mm complete all as specified in SSR Pt- I.

Material and labour for 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Taking down Chowkhats or frames (without taking of shutter) not exc. 1.5 sq. m each all as specified and directed.

Taking down chowkats or frame exceeding 1.50 Sq.m but not exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Material and labour Powder coated Aluminium anodised frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Material and labour Powder coated Anodised aluminium window and ventilator shutters, SLIDING type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Material and labour sheet glass ordinary quality and glazing 4mm thick in square exceeding 0.5 Sqm in each pane complete all as specified and directed.

Material and labour sheet glass ordinary quality and glazing 4mm thick in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Supply and fixing stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Material and labour Flush door shutters, 30mm thick, solid core construction, with both faces is covered with deco rative face veneer with lipping/frame to match complete all as specified and as directed.

Material and labour for Glazed and skeleton shutters 30mm thick , divided into squares, with plain,chamfered or roun?ded, mitred and rebated sash bars, any numbers and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and as directed.

Material and labour for Plain, solid, straight chowkats and frames in 2nd class hardwood , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed with additional rebates for fixing second shutter complete all as specified and as directed

Supply and fixing Butt hinges, stainless steel ISI Marked, 125mm long complete all as specified and as directed.

Supplying and fixing aluminium anodised barrel tower bolts of extruded section 200mm complete all as specified and as directed.

Supplying and fixing Extruded aluminium handles fabricated type anodised 150mm long complete all as specified and as directed.

Material and labour for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (300 mm length) complete all as specified and as directed.

Supply and fixing 140mm/150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and as directed.

Taking down cement plaster on brick or stone wall and concrete surfaces etc including racking out joints, hacking for key, scrubing down with water etc.complete all as specified and as directed.

Material and labour for rendering 15mm thick in two coats (10+5) on brick or concrete surfaces in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) mixed with liquid water proofing compound 0.2% by weight of cement used upto 8 m height including necessry scafolding complete all as specified and as directed. Note : Water proofing compound shall be measured and paid seperately.

Supply only liquid water proofing compound

Material and labour for rendering 10mm thick on brick or concrete surfaces in CM 1:6 on fair faces of brick work or concrete surfaces on wall surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for new surfaces of wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

Material and labour for preparation of new surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed

Material and labour for complete removal of exisiting treatment and applying Two coat of oil bound distemper over 1.5mm thick wall care putty and a coat of primer complete all as specified and directed

Material and labour for complete removal and existing treatment on surfaces of ceiling etc by scraping down surfaces and applying one coat of distemper over coat of primer complete all as specified and directed

Material and labour for preparation of old surfces including complete removal of entire treatment on wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed

Material and labour for PCC 1:3:6 type C1 20 mm graded aggregate 75 mm thick in plinth protection finished even and fair without using extra cement complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified.

Material and labour for MDF Board 18mm thick, exterior grade,both sides with decorative choice lamination or one side with decorative choice lamination & other side balancig white lamination, fixed with screws to frame work complete all as specified and directed.

Supply & Fixing of stainless steel Handle fancy type 100 mm size complete all as specified and directed.

Supply & fixing stainless steel hinge of size 65 mm self closing Italian patter suitable for cabinet and shelves opening / closing operation (fancy type) complete all as specified and directed

Material and labour for PVC edge lipping, 3/4mm thick fixed with nails for 18/19 mm thick pre-laminated partical board & shutters & etc, complete all as specified and as directed.

Material and labour for Granite (Black Galaxy) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a scred bed of 15mm thick in CM 1:4 complete all as specified and as directed Note: The quoted rate is deemed to be inclusive of necessary rounding/nosing of sharp edges and corners of granite.

Material and labour for figured glass pin headed type 4.00mm thick complete all as specified and as directed

Supply and fixing sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantileverbrackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

E/M Works

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land for taking into Credit and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed.

Taking down the existing unserviceable main DBs of any type/ capacity/ description existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed.

Taking down the existing unserviceable sub main wiring of any type / description existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed.

Material and labour for Point wiring complete with FRLSH PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit of suitable size and accessories, concealed in wall / surface with factory made terminal boxes with base and front plate for mounting switches, socket outlets, regulators etc as required including provision of FRLSH PVC insulated unsheathed 1.5 Sqmm FRLSH multistranded copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following:

(a) One light/fan point controlled by one, one-way switch

(b) One bell/buzzer point controlled by one push button on independent board controlled by one switch.

(c) All as per item No. 49 described here - in - before but for 3/6 pin 5 Amps switch socket combination on independent board

All as per item No. 49 described here - in - before but for 3/6 pin 15 Amps switch socket combination on independent board with 2.5 Sqmm copper cable and provision of 2.5 Sqmm FRLSH PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and directed.

Supply and Fixing modular switch 1 way 6 amps one module complete all as specified and as directed.

Supply and Fixing modular socket 6A 2/3 pin combined 2 module complete all as specified and as directed.

Supply and Fixing modular socket 6A / 16A - 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix Modular Bell push 6A 1 module, flush type, 240 Volts AC Single pole flush type and connecting up complete all as specified and as directed.

Supply and fix Call bell (Multi Music type) electric suitable for working on 230 volts AC supply complete all as specified and as directed.

Supply and Fixing modular fan step regulator 120W - 2 module complete all as specified and as directed.

Supply and fix Ceiling rose, surface type Bakelite, three terminal 65x32mm, ISI marked complete all as specified and as directed.

Supply and fix in repair Sheet metal enclosures for DBs single pole 8 way 240 V with neutral bus bar 200 Amps double door type with locking arrangement complete all as specified and as directed.

Supply and fix in repair Sheet metal enclosures, double door, MCB DB, 4 way, TPN, AC 415 Volts complete all as specified and as directed.

Supply and fix in repair MCB 63 Amps, 4 pole, 415 Volts, 50Hz 10 KA rupturing capacity 'C' curve complete all as specified and as directed.

Supply and fix in repair MCB SPN, AC 240 V, 6A to 32 Amps 10 KA rupturing capacity 'C' curve complete all as specified and as directed.

Supply and fix in repair MCB SP 240 V, 6A to 32 Amps 10 KA rupturing capacity 'C' curve complete all as specified and as directed.

Material and labour for sub main wiring with two runs of single core 6.0 sqmm PVC insulated, unsheathed multistranded copper conductor 1100 volts FRLSH cable, with one run of 6.0 sqmm single core PVC insulated unsheathed multistranded copper conductor 1100 volts FRLSH cable as earth continuity conductor and one run of suitable size non metallic rigid PVC conduit and conduit accessories fixed on concealed on wall/roof including cutting chases etc complete all as specified and as directed. Note : (i) Two runs of main cable , one run of earth continuity conductor cable and one run of PVC conduit will be measured as one unit for payment purpose.

Supply and fix in repairs LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver including Stellar bright 20 watt box type complete with all accessories internally pre wired and connecting up with twin / three core flexible copper conductor cable of suitable size from ceiling rose to fitting with PVC round block 02 nos for mounting etc complete all as specified and as directed.

Supply and fix in repairs LED light fitting surface mounted type 2 feet x 10W LED complete with all accessories internally pre wired and connecting up with twin / three core flexible copper conductor cable of suitable size from ceiling rose to fitting with PVC round block 02 nos for mounting etc, complete all as specified and as directed.

Supply and Fix in repairs batten holder, (B 22) two pin type screwed with round block including connection complete all as specified and as directed.

Supply and fix in repairs LED inverter T-LED bulb 20 W, 2 pin, B 22 type Cool daylight, 8hrs charging time, 3 hrs back-up time complete all specified and as directed. .

Refixing of any type of light fittings and any type of lamp with holder when found serviceable obtained from Item Sl No 46 with suitable PVC round block 02 Nos all as specified and as directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanized earth wire 4mm dia connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance not exceeding 50 metre, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I

Vinayaga constructions

M/S VIGNESH POWER SYSTEM

JR ENTERPRISES

sri manikandan enterprises

CHANDRASEKRAN ENTERPRISES

THIRUMURUGAN ENTERPRISES

ARUVI CONSTRUCTION