REPAIR MAINT REPLACEMENT OF INTERNAL WIRING SUBMAIN WIRING CONTROL DBs MCBs U/S FITTING FIXTURES, GYSER EXHAUST FAN CEILING FAN AND CONNECTED MISC ITEMS OF WORK AT VARIOUS MD/OTM ACCN AT PEDONG DALAPCHAND AP ALGARAH AND TEESTA TCP UNDER GE 867 EWS

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc but excluding DBs, light fittings etc and making good disturbed surfaces of walls, floors etc. and matching with existing surface all as specified and as directed.

M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable laid / fixed and including concealed in PVC rigid conduit on walls/ceiling alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC modular boards and plate for mounting switches, sockets, fan regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch complete all as specifed and as directed. NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black). 2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.

All as per serial item No. 2 here-in-before but for one 5 Amp, 3 pin socket outlet point on same board with other switches including earth wire as specified.

All as per serial item No. 2 above but for one 3 pin socket outlet, 5 Amps on independent board but below the switch board of light points in the same vertical plane/horizontal plane, with cables, 1.5 sq. mm size.

All as per serial item No. 2 here-in-before but on independent board.

All as per serial item No. 2 here-in-before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per serial item No. 2 here-in-before but for one light point controlled by 2 way switches.

All as per serial item No. 2 here-in-before but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, neutral and earth for one 15 Amp, 6 pin socket on independent board.

All as per serial item No. 2 above but for one 3 pin socket outlet, 15 Amps on independent board but below the switch board of light points in the same vertical plane/horizontal plane, with cables, 2.5 sq. mm size.

S&F modular switch one way, 6 Amp, one module, 230V all as specified and directed.