Creation of Canopy / Industrial Shed for 180 KVA DG Set with related Works at Tubewell Bathindi (Filling Station Narwal)

Providing, Fabrication, assembly and erection in position of structural steel section CGI Industrial Shed / Canopy at Tube well Filling Station Narwal of floor size 27’ x 15’ in the rectangular shape by welding 50 mm X 50 mm x 5mm MS angle iron sections lengths to make a rectangular shed. The angle iron frame to be supported by adequate no. & height of column made out of ISMC-100 with a height of 15.5’ at one side and 15’ from the ground level at the other side of the shed to provide a gradual slanting slope to roof for easy flow of water during rains. Providing/Fabrication, fitting of the vertical column of ISMC–100 steel section with base and top connecting plate made out of MS Plate 200 mm x 200 mm x 6 mm welded on either sides of column and to be embedded in a cement concrete mix of 1:2:4 ratio at spacing of center to center 1000mm with adjustment as per Site requirement. The column is to be embedded in blocks of 2’x2’x2’ with 10 mm TMT steel mesh for proper erection of column. Fabrication and welding in position of cleats 50 mm long made of ISA-50x50 x 5 mm thick for seating of runner made out of ISA-50x50 x 5 mm thick in spacing of three equidistance spaces along the height of shed with adjustment near frames as per actual. Fabrication and welding in position of Purlin made out of ISA-50x50 x 5 mm thick with cleats made out of ISA-50 to support purlins on Rafters made of IAS in slope of 1 in 10 feet of roof. Roof with 0.5 mm thick Pre-Colored CGI sheet. Pre-colored CGI Sheets of approximate size to be fixed on the angle iron frame horizontally with the help of hooks and nuts, limpet washer to make it complete water proof. Job includes design, providing fitting and welding of suitable steel section supports of angle iron lengths for proper strengthening and durability of the shed. Painting of the steel section with superior quality enamel paint. Complete flooring and electrification of new fabricated CGI Shed. Excavation of trench of size 1.5’ x 1’ (width x depth) along the length and breadth of shed in between the block of vertical column and laying in position PCC Floor in ratio of 1:2:4 block of size 1.5’ x 1.5’ (0.5 feet above the ground level) (width x depth). Cleaning of surface of shed for garbage including disposal of garbage/debris to the dumping ground within 20 mtrs lead. Providing and laying in position M-15 grade of PCC floor of suitable depth in such a way that floor remains approx 6” above the ground level after laying and finishing. PCC flooring includes the cost of cantering, ramming, shuttering and reinforcement work after providing of suitable filling earth material for complete leveling of surface using manual labor on whole floor area. Laying of cement concrete on whole floor area in ratio of M-15 mix concrete by way of providing of cement, sand and bajri and laying of cement concrete plinth 01 feet above ground level all along the periphery inside the shed Job includes making drainage/slope all around the outside periphery of shed with suitable gradient for speedy draining of water. The complete electrification of shed by way of providing and fitting of PVC pipes 1” dia., bends, junction boxes, hooks box 12 module 2 nos. box 4 module - 2 nos., box 2 module-1 no, fixing using drill machine and anchoring with nuts & bolts along with at least providing and fitting of one no. 15 ampere socket-switch, one no. 5 ampere socket-switch and one no. ceiling fan. Complete wiring in shed by providing and laying of copper wire 0.5 mm2 & 11/2 mm² from main switch to all the different connections and to different switch boards. Laying of 02 Rectangular Concreate block at filling point of size 2’ X 2’ X 3’ with 10mm TMT Steel mesh. Providing and fitting of pendant holders for complete illumination and then fitting of LED bulbs. Complete testing of each point with respective switches. The Job also includes Providing and installation of bench of 05 seated - 03 Nos., with back for sitting of staff. The job further includes Providing, installation and testing of 50 watt LED – 06 Nos., light along with wiring at Suitable place in the complex of Filling Station Narwal.