REPAIRS MAINT OF FENCING, GATE, BOUNDARY WALL ,DRAIN, HARDSTANDING , IN ZONE-E, ZONE-F , SANJOG CHHETRI VIHAR OF AGE BR-II UNDER GE (EAST) LUCKNOW

Amount

Dismantling fencing wire mesh,any description complete all as specfied and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion complete all as specified and directed.

M&L for cement concrete type C2 1:3:6 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed

S&F M S work as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, complete all as specified and directed.

M&L two coat of synthetic enamel pinting over a coat of red oxide primer including preparation of steel new surface over 10 cm width or girth complete all as specified and directed.

M & L for preparing new steel surfaces not exc 10cm width/girth, applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Supply only chain link MS galvanised fencing, any mesh, size acomplete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S & F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured complete all as specified and directed.

S&F 5 to 10 mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Demolition of reinforced cement concrete in cooking platform & chullah hoods and similar work etc.complete all as specified and directed.

M&L for brick work using old size fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Ditto all as per item No 15 above but except bricks

M&L for brick work using old size fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.

M&L for providing precast cement concrete louvers and jallies type B0 1:2:4 (using 12.5 mm graded stone aggregate), 35 mm thick (measured solid), including all moulding set in cement mortar 1:4, but excluding frame complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L rendering 10 mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 15 mm thick in cement plaster 1:4 on other than fair surfaces and surface finished even and smooth without using extra cement complete all as specified and as directed.

M & L for applying two coats of cement base paint over a coat of primer on new plasterd surface of wall including preparation of surface complete all as specified and directed.

M&L three coats of white wash on walls including preparation of new plastered surface complete all as specified and directed.

M&L for RCC 1:1.5:3 , nominal mix using 20 mm graded stone aggregate as in slabs supported on walls, roof beam and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

S&F for TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking and bending spirally for hooping for coloumns, hooking ends and binding with and including M.S wire not less than 0.9 mm dia complete all as specified and directed.

S&F for TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L providing cement concrete type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Providing precast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slabs (for manholes/water tank etc), and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 including removal of existing damaged covers complete all as specified and directed. (Note :- reinforcement shall be measured and paid separately)

M&L 75 mm thick PCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in floor or hard standing etc finished surface even & smooth without using extra cement complete all as specified and directed.

M&L for PCC type D-2 (1:4:8) (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete in floor hard standing complete all as specified and directed.

M&L for sand/crused stone sand filling under floor or in foundation or as in sand cushion bed including leveling complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block glossy finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 grade set jointed and pointed with grey cement slurry and pigment to match the floor approved design /colour set and bedded all as specified and directed.

M&L for glossy type coloured chequered cement concrete tiles with gray cement and pigment size 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.

M&L 20 mm thick granite (of any type) work (table rubbed and polished) for wall,pillar lining (veneering to wall) over 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Dismantling of stone slabs and tiles laid dry of any description or thickness in floor, aprons etc complete all as specified and directed.

M&L for 40mm thick PCC type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in floor finishes laid in panel and finished even and smooth with out using extra cement complete all as specified and directed.

Supply only 38x3mm thick glass dividing strip as in flooor complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection surface finished fair and even complete all as specified and directed. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed.

QUALITY CONSTRUCTIONS CO

M/S KAUSHIK CONSTRUCTION

M/S S S A ASSOCIATES

Ajay Sahu & Sons

M/S SWATI CONSTRUCTION