SPECIAL REPAIRS TO BLDG NO. T-293, GD ROOM LIVING ACCN AND TOILET OF TR JN GOING TOWARDS GADA FIRING RANGE AND PROVN OF TERMITE TREATMENT IN BLDG NO. 07 AND 08 AT NCC OTA AND PROVISON OF NEW GUARD REST ROOM ----- WING GRC UNDER GE KAMPTEE.

Amount

Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed of cement mortar (1:6) complete all as specified and as directed.

All as item No 02 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile SQM exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and joined in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar(1:6) etc complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in skirting etc. set and joined in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

Material & labour for glazed ceramic coloured tiles 300mmx450mmx6-7mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM 1:4 finished even and fair complete all as specified.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

S&F pre-polished granite 20mm thick fixed on platform/shelves over 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as directed.

Dismantling of timber fillets,rails, posts, rafters, purlins under 40 Sq cm in section complete all as specifed and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc confirming to Fe 410-W (Gde-E- 250) quality A.complete all as specified and directed.

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering.complete all as specified and as directed

M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of on colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw complete all as per manufacturer instructions.

M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based plain steel sheet of on colour having tensile strength of 550 MPA as in ridges/valley, fixed with and including self tapping screw complete all as per manufacturer instructions.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets,complete all as specified and directed.

M&L for GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 28mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed

M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed (Note : GI frame work will be measured and paid for separately)

Demolition of RCC in any description and in any position and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m complete all as specified and as directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Formwork to Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and directed.

M&L RCC 1:2:4 type B1 ( 20mm graded stone aggragate) for slab supported on walls, beams and coloumns in floors roofs, landings, balconies, canopies,deck slab and in shelves and the like complete all as specified and as directed.

M&L for providing precast RCC cover slabs 1:2:4 type B1 (20 mm graded aggregate) set in cement mortar 1:4 as in (for drain, man holes etc) and similar articles with plain faces and each cover slab covered in 6 Nos loop holes complete all as specified and directed

M&L for Formwork to edges of concrete flats ,thread breaks in floors, openingg in concrete walls ,floors exc 5 cm and not exc 10 cm complete all as specified and directed

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

S&F mild steel TMT bars 8 to 10mm dia a as in stirrups, spacers and binders.

Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete /sub base complete all as specified and directed.

Material & labour 75 mm th PCC (1:3:6) Type C2 (using 40 mm graded stone aggregate), as in plinth protection and finishing surfaces even & smooth without using extra cement including mastic filling in the joint complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to is 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 30 mm thick complete all as specified and directed . Note : Sand cushion will be measured and paid separately

M& L for sand filling under cushion of paver blocks complete all as specified and directed

M&L for providing cement concrete1:3:6 type C1 (20mm graded aggregate) as in copings,plinth courses including weathering,slightly rounded or chamfered angles and throating on edges complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and as directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 33 here-in-above but half brick wall in CM 1:4 complete all as specified and as directed.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed

M&L rendering 10mm thick on brick work or concrete surfaces with CM (1:6) finished even and smooth without using extra cement complete all as specifed and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on surfaces of ceiling in cement mortar (1:3) and surfaces finished fair and even complete all as specified and as directed.

M & L for prepartion of new plastered surface and applying two coats of oil bound distemper over a coat wall care putty complete all as specified and directed.

M & L for complete removal of Existing Treatment and applying two coats of oil bound distemper over a coat of cement Primer and wall care putty complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed

M&L for preparation of new plaster surface of ceiling and applying two coats oil bound distemper over a coat of primer complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed

All as per item No 43 here-in-above but of size exc 1.5 Sqm and n.exc 4 Sqm each complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

M&L for MS Framed work of Fe-290(Gde E-165)as in doors or gates of angle or other section with gusset plates, rails, braces, MS Plates etc, complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeetc complete all as specified and directed.

S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling and fixing in opening as per specification and directed.

S & F factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of mild steel tubes for top & bottom rails, Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm with steel inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, fixing in the frame at site as per specification, drawing and as directed.

S&F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc all complete all as specified and directed.

All as per item No 50 but without glazing bars complete all as specified and directed

S&F Steel ventilator with top hung shutter including hinges, with steel handle, steel tower bolt, peg stay complete all as specified and directed.

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

S & F 4 mm thick sheet glass ordinary quality, glazing with oil putty and glazing pin and wood bid in square n. exc. 0.5 sqm in each pane complete all as specified and as directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F 100mm long medium weight cold rolled mild steel butt hinges complete all as specifed and directed.

Supply & fixing 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed

S&F 150 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F Extruded Aluminium alloy handles, fabricated type anodised of 125mm long complete all as specified and directed.

S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Material & labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L for preparation of new steel surfaces of any description not otherwise described, exc. 10 cm width or girth & applying with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M & L for preparation of old steel surfaces of any description not otherwise described, exc. 10 cm width or girth & applying with one coats of synthetic enamel paint.

M&L for cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in cement mortar 1:3 complete all as specified and as directed.

M&L 15mm GI tubing 'Medium grade' with all fitting and fixed complete to wall and ceiling or laid in floor including taking up or down steel tubing and connections complete all as specified and directed.

All as per item no 66 above but 20mm bore complete all as specified and directed.

S&F in repair bib tap 15 mm dia cast copper alloy with crutch or butter fly handle screwd for iron pipe or for brass ferrule and fixed complete all as specified

Supply & fixed in repairs Wash Hand basin ( flat back or angle back )of size 550 X 400 MM white including , waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

S & F in repairs vitreous china white squatting pan "Orissa Pttern" size 580x440mm, with integrated foot rest (excluding flushing sistern, flush pipe etc) including making good to floor complete, all as specified and directed.

Supply & fixed in vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and directed.

S&F in repair Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, with bottle trap, CP grating and Union for discharge pipe, complete all as specified and directed.

S&F 15mm bore CP Urinal spreader for urinals complete all as specified and directed.

S&F PVC connection 15mm size, 600mm long with PTMP nuts both side complete all as specified and directed

S&F Viterous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and directed.

S & F in repairs 10 ltr cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified.

S & F in repairs chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15 mm bore of pipe complete.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair long shank and cup (concealed type) stop valve 15 mm dia Chromium plated fancy type, high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed complete all as specified and directed.

S&F Pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed make seiko complete all as specified and directed.

S&F in repair stop/angle cock fancy type chromium plated, screwed down, high pressure with cruntch or buttery handle screwed both ends for iron pipe of 15mm bore pipe complete all as specified and directed.

S & F in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut complete all as specified and directed.

S&F in repairs Chromium plated fancy type stop valve 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed complete all as specified and directed.

S & F in repair for curtain rails,mild steel,chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

S &F Towel Rail 20mm dia of Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specifed and directed.

S & F waste fitting, 40mm brass, chromium plated for sink, basin, etc with long screwd shank and fly nut complete all as specified and directed.

S&F in repairs 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and as directed.

S&F in repairs PVC (SWR) pipes of 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specifed and directed.

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia complete all as specifed and directed.

S&F CP grating of size 100mm dia complete all as specifed and directed complete

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltr hoisted and fixed in position incl top cover incl dismantling of water tank all as specified in SSR part-I complete all as specified and directed.

S&F in 20 mm bore ball valves. high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20 mm -210 Gms) complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m in depth and 1.5m in width and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches exc 1.5m in deepth and 3.00m in width and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n exc. 25cm in soft/loose soil complete all as specified and directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Demolition of cement concrete bed in hauching and breaking up drain pipes 150mm SGSW set in cement mortar of the following dia complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in bed to drain pipe 150mm bore including packing under and hauching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L for 150 mm bore SGSW drain pipe grade A laid in trenches and jointed in CM 1:1 complete all as specified and directed.

M & L for Post Construction ATT along thew external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc in apron, etc complete all as spd and directed.

M & L for Treatment of soil under existing floors using emulsion @ one litre per hole , 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floors, complete all as spd and directed.

M & L for Post Construction ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 lite/hole by drilling 6 mm dia holes at a ownward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as spd and directed.

M&L for providing RCC 1:1½:3 type A1(nominal mix) as in footing, foundation,beams,plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L for Form work to side of columns and similar work complete all as specified and directed.

M&L for providing RCC 1:1½:3 type A1(nominal mix) as in columns and pillars etc complete all as specified and directed.

M&L Form work to side of slide and soffits of floor or roof beams,beam haunching, girders, bressummers, lintels, and similar work complete all as specified and directed.

M&L for providing RCC 1:1½:3 type A1(nominal mix) (using 20 mm graded stone aggregate) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

M&L form work to chullah hoods, chajjas, troughs and similar items including edges and similar work complete all as specified and directed.

M & L for providing RCC 1:1½:3 type A1(nominal mix) (using 20 mm graded stone aggregate) as in chajja etc complete all as specified and directed.

M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work ; not exceeding 200mm thick(Horizontal or sloping) complete all as specified and directed.

M & L Formwork to Formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and directed.

M & L for Providing RCC 1:1½:3 type A1(nominal mix) (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floor, roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Supply only Liquid water proofing compound of approved quality complete all as specified and directed.

M&L for Moorun/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L hardcore of gauge n exc. 63mm deposited, spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surface for plinth protection/path/floor, etc complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and directed.

M&L for providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone agg) as in sub base in floor/paving etc complete all as specified and directed.

S&F for Pressed steel frame for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete.

M&L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (Stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per spec. & drawing complete all as specified and directed.

Supply and fixing second class hard wood 35mm thick factory made plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial vennering on both faces. The size of rail and stile as per IS 1003(part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S& F 35 mm thick second class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galavanised wire staples complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F power coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed/sliding type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap breading, screws, hardware, etc. complete all as specified and directed.

Supply and fix aluminium (colour powder coated) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mmx31.75mmx1.30mm thick and shutter frames of size 40mmx18mmx1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement (notes (i) Glass filling in panels or windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate of item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0,45 mm nominal dia of wire and avg width of aperture 1.40 mm fixed with aluminium wire stapeles; (iii) Glass shade/tint

M&L aluminium (anodised) grill made out 5mm wide flat, square, rectangular or similar section, fixed with channel of size 38mmx12mmx13mm (Section 878) complete all as per manufacture's catalogue 7 specification (make:Grill o 20 of 'DECO GRILL' or equivalent) complete all as specified and directed.

M&L for 4.0 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n exceeding 0.5 sqm in each panes complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforecement with 3 mm thick and weight not less than 3.00 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufactuer's instruction including 15mm thick cement plaster in CM 1:4 with WPC and two coat of aluminium paint of 0.2kg/Sqm over membrane complete all as sepecified and directed.

S & F health faucet of 15 mm bore brass cromium plated including PVC pipe to connection GI tubing 15 mm bore all complete all as specified and directed.

S&F for soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repairs 40mm bore of pipe low density polythylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with slovent cement complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm ,setting and jointing with solvent cement complete all as specified and directed.

S&f 110 mm bore PVC (SWR) pipe, single socketed in any lengthy with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete as specified and as directed.

S&F PVC (SWR) pipes of 75 mm bore single socketed, in any length with ring joints, laid in trenches or in floors complete all as specified and directed.

S&F CP granting of size 100mm dia complete all as specified and directed complete.

S&F110mm PVC (SWR) bends any radius with oval access door.

S& F 75 mm PVC (SWR) bends any radius with oval access door

S&f PVC cowl slotted vent cowl 110 mm size complete all as specified and directed.

Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to macth with existing surfaces including white washing/colour washing/ distempering to match with existing wall/floor/ceiling finishes, complete all as specified and directed.

Taking down sheet metal enclosure, DB & MCBs main switch etc and making good distrubed sufaces to match with exisiting surfaces, complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces, complete all as specified and directed.

Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and directed. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item Sl No 150.00 above but One ceiling/exhaust fan point controlled by oneway switch and regulator, complete all as specified and directed.

All as per item Sl No 150.00 above but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed.

All as per item Sl No 150.00 above but One 3 pin 5 amps socket out let point on independent board but wiring with 2x2.5 sqmm + 1x2.5 Sqmm PVC FRLSH multistranded copper conductor wire complete all as specified and directed.

All as per item Sl No 150.00 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point, complete all as specified and directed.

Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed.

Supply and fixing for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting.

Supply and fix Fan step regulator, 120W - 2 module complete all as specified and directed

Supplying and fixing 18-22 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed.

Supply and fix LED baton fitting 2' length including drivers having energy consumption, 10/11W ,230 V ,50Hz, 6500K, not less than 1000 lumen prewired, complete all as specified and directed.

Supplying and fixing 20-24 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed.

Supply and fixing LED light fitting 10-12W bulk head luminaries with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable suitable size of 230V, 50Hz complete all as specified and directed.

Supply and fix building security light LED 25 W with Lumen O/P 2500 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc. complete all as specified and directed.

Taking down fan, ceiling cable end, dismantling blades, down rods and removing fan and blades to store complete all as specified and directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete all as directed.

Supply and fixing Exhaust fan metallic body 300mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, and making holes complete all as specified and directed.

Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door including dummy plates wherever required complete all as specified and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed.

Supply and fix MCB single pole & neutral 240 volt 6 to 40 amps 10 KA, complete all as specified and directed.

Supply and fix MCB triple pole and neutral 415 volt 40 to 60 amps 10 KA. complete all as specified and directed.

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed.

Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

Supply and fix Double wall corrugated High Density Polymer Ethyl(HDPE) pipe for laying of electric cable of size 50 mm outer diameter and 38 mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches, wall, poles including bends, sockets and other connected accessories complete all as specified and directed.

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened,PVC bedded, galvanised steel strip or wire armoured,electric power cables ( heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 sq mm,4 core including testing after laid and jointed all as specified and as directed

S& F octagonal GI decorative street light pole 7m long complete with brackets for mounting of street light, in built connectors for connecting cables mounted on suitable PCC structure 1 : 2: 4 B1, 450mm X 450mm x 900 mm burried in ground to a depth of 600mm including foundation bolt grouted complete all as specified and directed.

Supply and fix LED street light luminaires of capcity 60 watts with pressure die cast aluminium housing heat resistance toughened glass, IP 66 protection complete with driver,1.5 sqmm 3 core multistranded copper wire for connection from street light fitting to pole connector,fixing with accessories including taking down old unserviceable fitting complete all as specified and directed.

Excavation in trenches for laying of cable trench, pole and stay foundation, laying of pipes in any type of soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out complete all as specified and directed.

Supply and laid in trenches GI tubing medium grade with all fitting complete all as specified for the 25 mm bore Note: Provision of GI union is compulsory for each branch

Supply and laid in trenches GI tubing medium grade with all fitting complete all as specified for the 20 mm bore Note: Provision of GI union is compulsory for each branch.

S&F Gun metal gate valve with iron wheel head screwed both end of size 20 mm dia for iron pipe and fixed complete all as specified and directed.

S&F Gun metal gate valve with iron wheel head screwed both end of size 25 mm dia for iron pipe and fixed complete all as specified and directed.

M&L for cutting of exixting pipe and making for joining 50mm dia pipe with fitting complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 41,541.00]

M/s M.G. Hargunani

M/s Jagdish Staioners and General Stores

S D WAGHAMSHI

M/s Rahul Traders

M/s DS Khekde

Bidder Name

S D WAGHAMSHI

M/s B S Jain

M/s Rahul Traders

M/s DS Khekde

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani