REPAIR AND MAINT WORK OF MAP FURNITURE UNDER GE(N) PATIALA

Amount

Almirah Large steel 1/2H 1/2 Shelves (FD/E6/MAP/18):-

Taking out of unsv Handle and S&F New Handle including Nut and Bolt with Washer complete as per existing shape ,size and as per Drg.

Taking out of unsv Butt Hinges and S&F New Butt Hinges complete as per existing shape ,size and as per Drg.

Taking out unsv old lock and S&F new lock as per existing shape and size

Taking out of unsv Hanging Rod of conduit Pipe and S&F New Hanging Rod with bracket complete as per existing shape,size and as per Drg.

Taking out of unsv /Rusted Shelves of Almirah Large steel 1/2H 1/2S and S&F New Shelves dully Painted complete as per existing shape ,size and as per Drg.

Adjustment of existing shelves by providing New clamps/clips after removing the old unsv clamps/clips as per existing shape,size and as per drg.

Preparation of surfaces of denting and Painting of Almirah Large steel 1/2H, 1/2S complete inside and outside.

Bed Hard (FD/E6/MAP/08(R):-

Taking out of unsv ply wood including Nut and Bolt with Washer complete and S&F new ply wood 12 mm thick BWR complete as per existing shape ,size and as per Drg.

Taking out unsv Head Board and S&F New Head Board of Prelaminated Particle Board/MDF Board Exterior Grade 18mm both side Teak Face and other side white complete as per Drg

Taking out unsv foot Board and S&F new foot Board of Prelaminated Particle Board/MDF Board Exterior Grade 18mm both side Teak Face and other side white complete as per Drg

Painting of Bed Hard Steel complete outside and broken pipe duly welded

S & F of new rubber shoes as per drg.

Table Bed Side (FD/E6/MAP/15(R):-

Taking out unsv Top and S&F New Top of Prelaminated Particle Board Exterior Grade 18mm one side Teak Face and other side white with 04 mm Teakwood beading all around it complete as per Drg.

Taking out of unsv back and S&F new back ply of 9mm thick commercial BWR complete as per Drg.

Taking out of unsv sides and S&F new sides of Prelaminated Particle Board/MDF Board Exterior Grade 18mm one side Teak Face and other side white complete as per Drg.

Taking out of unsv upper Drawer and S&F new upper Drawer as per existing shape and size.

Taking out of unsv lower Drawer and S&F new lower Drawer as per existing shape and size.

Taking out old unsv knobs and S&F new knobs as per sample

Painting of table bedside steel as per Drg.

S&F of new telescope chennel as per drg

Chair Dining Officers (FD/MAP-II/04):- M & L for carrying out repair/replacement of following parts of Chair Dining as per drawing after dismantling the old parts complete all as specified

(a) S & F Front legs of Teak wood.

(b) S & F Rear Legs of Teak wood.

(c) S & F Front Rails of Teak wood.

(d) S & F Side Rails of Teak wood.

(e) S & F Back Rails of Teak wood.

(f) S & F back Stiffners of Teak wood.

(g) S & F stiffeners of Teak wood.

(h) S & F Seat 09 mm thick Ply wood BWR grade Make Kit Ply/Arched/Natioal

(j) Supply only seat 75mm thick 40 density with fabric appvoved by GE

(k) M & L for applying two coats of french polish to Chair Dinning after preparation of surface complete all as specified.

Chair writing (FD/E6/MAP/12) :-

(a) M&L for Taking out old unsv Seat and S&F New Seat complete as per Drg

(b) M&L for Taking out old unsv Back and S&F New Back complete as per Drg

(c) M&L for Taking out old unsv arm rest and S&F new arm rests with Nut and bolt as per Drg

(d) M&L for Jointing the Broken Parts of steel Furniture and painting all as Directed.

Bin linen multipurpose (FD/E6/MAP/09):-

Taking out old unsv back ply and S&F new Back ply as per drg

Taking out old unsv door shutter and S&F new door shutter as per drg

Taking out old unsv drawers and S&F new drawers as per drg

Taking out old unsv knobs and S&F new knobs as per drg

Taking out old unsv top and S&F new top with 18mm thick pre Laminated particle board exterior grade including egding with wooden beading all as per drg

Teapoy varandah MAP (FD/E6 (MAP)/17):-

Taking out old unsv top and S&F new top of prelaminated Pratical Board one side white 18/19mm thick along with 4mm thick teak wood beading all arround the Top

Applying two Coat of Synthetic Enamel Paint as per Drg.

M&L for jointing of broken part steel fur through welding

Charpoy IP with hard top (FD/MAP-II/01)

(a) Taking out of unsv ply wood including Nut and Bolt with Washer complete and S&F new ply wood 12 mm thick BWR (Make : Green Ply/ Archid Ply/ Kitply complete as per existing shape ,size and as per Drg.

(b) Painting of Charpoy hard top complete outside and broken pipe duly welded .

(c) S & F of new rubber shoes as per drg.

M/s Harmans

Arneja Builders