Cleaning and upkeeping including miscellaneous repair work for Transit camp Central hospital Dav School Officers club sneh milan and Auditorium and other welfare buildings at Bishrampur township of Bishrampur Area For 3Months

Amount

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead.

Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as 5% total coated thickness (TC T), Zinc coating 120gsm as per IS:277 in approved by Engineer-in-charge) 0.05 mm. 240 mpa mm steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required..

12mm cement plaster of cement mix 1:6

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately). For Fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).

providing and fixing glazing in aluminium door , door window, ventilator shutter and partition etc with pvc/neoprene gasket etc complete as per the architectural drawing and the direction of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mmthickness.

providing and applying white cement based putty of averge thickness 1 mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shads: New work (Two or more coats ) over and including water thin able priming coat with cement primer.

Printing with synthetic enamal paint of approved brands and manufacture of required colour to give an even shade : One or more coats on old work.

providing & Placing on terrace ( at all floor levels) polyehylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipe but without fittings and the base support for tank.

providing and fixing wash basin with C.I bracket, 15mm C.P brass pillar taps, 32 mm C.P brass waste of standard pattem, includng painting of fittings and bracket, cutting and making good the walls wherever require : White with single 15 mm C.P brass pillar tap.

Providing and fixing G.I pipes complete with G.I fittings including trenching and refilling etc of GI pipe 50mm dia External work

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting this includes jointing of pipe & fittings with one steo CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:15 mm nominal bore.

Providing and fixing brass stop cock of approved quality :15 mm nominal bore

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. ( 2 time ).

Transportaion of rubbish, garbages etc. including loading , unloading manually lead upto 5.00 km by tractor trolley.

Brick work with non modular fly ash bricks conforming to IS:12894,class designation 10 average compressive strength in above plinth level up to floor V level in Cement mortar 1:4 (1 cement : 4 Coarse sand)

White washing with lime to give an even shade :Old work (two or more coats)

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying coat of approved steel primer all complete.

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Cleaning, mopping and washing of floor, toilet , fixties , yard road , drain, roof of NBR building other places neathy all complete with tools, tackles etc to make the floor clean & hygienic as pser instrction of Engr. In charge. (cost of disinfectant separtely paid) Transit camp (deploying 4.00 Man Power per day ).

Cleaning, mopping and washing of floor, toilet , fixties , yard road , drain, roof of NBR building other places neathy all complete with tools, tackles etc to make the floor clean & hygienic as pser instrction of Engr. In charge. (cost of disinfectant separtely paid) Central Hospital (deploying 9.00 Man Power per day ).

Cleaning, mopping and washing of floor, toilet , fixties , yard road , drain, roof of NBR building other places neathy all complete with tools, tackles etc to make the floor clean & hygienic as pser instrction of Engr. In charge. (cost of disinfectant separtely paid) Officer club (deploying 1.00 Man Power per day ).

Cleaning, mopping and washing of floor, toilet , fixties , yard road , drain, roof of NBR building other places neathy all complete with tools, tackles etc to make the floor clean & hygienic as pser instrction of Engr. In charge. (cost of disinfectant separtely paid) Sneh Milan (deploying 1.00 Man Power per day ).

Cleaning, mopping and washing of floor, toilet , fixties , yard road , drain, roof of NBR building other places neathy all complete with tools, tackles etc to make the floor clean & hygienic as pser instrction of Engr. In charge. (cost of disinfectant separtely paid) Auditorium (deploying 1.00 Man Power per day ).

Maintenance of Garden , lawn of already planted decorative plants including removing of unwated vegetation, grass and watering of plants etc complete , as per instruction of Engineer - in - charge . Maintenance of garden . At central hospital (01 man power mali).

Maintenance of Garden , lawn of already planted decorative plants including removing of unwated vegetation, grass and watering of plants etc complete , as per instruction of Engineer - in - charge . Maintenance of garden . At Transit camp (01 man power mali).

Maintenance of Garden , lawn of already planted decorative plants including removing of unwated vegetation, grass and watering of plants etc complete , as per instruction of Engineer - in - charge . Maintenance of garden officer club (01 man power mali).

Running maintenance of R/O water cooler excluding major breakdown, as per instruction of Engr. In charge.

Repairing and renovation of submersible pump & motor of 3.00 HP including taking and lowering of pumps , binding, bush water seal, impeller lath work and fitting charge, as per instrction of Engg. In charge.

Supply of phenyl of approved brand as per instruction of engineer in charge.

Supply of Nepthalene ball of approved brand as per instruction of engineer in charge.

Supply of Harpic of approved brand as per instruction of engineer in charge.

Supply of Washing powder for domestic use of approved brand as per instruction of engineer in charge.

Providing of liquid soap 200 ml with bottel as per instruction of engineer in charge.

Supply of air packet or equavalent as per instruction of engineer in charge

Supply of room fresher of approve brand as per instruction of engineer in charge.

Supply of dahalia plant , as per instruction of engineer in charge

Supply of merygold (genda ) plant (hybrid), as per instruction of ingineer in charge .

Supply of rose (gulab) , as per instruction of ingineer in charge .

Supply of Gudhal pant , as per instruction of ingineer in charge .

Supply of Flexible PVC hose Pipe 25mm(for gardening) , as per instruction of ingineer in charge .

Providing and fixing wallpaper with Approved quality of glue as per instruction of eng incharge

Trimming and trenching of tree branch mannually (Height more than 10 feet ) and disposal of cutting branches upto a lead of 50 mtr all complete job as per instruction of engineer in charge .

Total impact of GST for the purpose of CTC

ANKIT RAJ (BID ID -1209795)

RADHIKA AND LALITA SERVICES PRIVATE LIMITED (BID ID -1209811)

M/s GAHARWAR CONSTRUCTION (BID ID -1209845)

SANTOSH KUMAR SINGH (BID ID -1209790)

M/S UDAY KUMAR SINGH (BID ID -1209859)