STP WATER DISTRIBUTION SCHEME FROM STP TO 12 PARKS AND CENTRAL VERGE WITH 1 STORAGE TANK IN PARK NO 7 SUNCITY , WARD- 32, ZONE-III , UNDER MUNICPAL CORPORATION GURUGRAM(HARYANA)

Amount

STP WATER DISTRIBUTION SCHEME FROM STP TO 12 PARKS AND CENTRAL VERGE WITH 1 STORAGE TANK IN PARK NO 7 SUNCITY , WARD- 32, ZONE-III , UNDER MUNICPAL CORPORATION GURUGRAM(HARYANA)

30.82(Providing and fixing in position best Indian make flexible tube connection)(b)c.p.brass (iii)15mm*450mm

Earth work for trenchless excavation of 125mm dia not exceeding 1.5 meter depth in all kind of soil with complete excavation and refilling with well compaction in 15cm layering and disposal of all surplus soil as directed within a lean of 30 meter.

HSR 24.1.17 Providing and fixing testing joints made of 20mm x 3mm thick G.I. strips 125 mm long with 4 nos. G.I. bolts and nuts with washers complete. (82.00)SDS.

NEW HSR 2021(22.32.1):- Providing and fixing vitreous chinaware dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous chinaware dual purpose WC pan with white solid plastic seat and lid with white vitreous chinaware flushing cistern and C.P. flush bend.

NS item Self Priming Monoblock Pump 1 HP make Crompton set complete work given Head 6-45 meters, Discharge 57-13 LPM(4939.00+0% = 4939.00) SDS.

Providing & Fixing HDPE (High Density Polyethylene) pipes in accordance to IS 1433:1996 EN 1519-1/EN 12666-1,pipes pressure (PE-80) & tempering (heat reversion radial & axial dimension; < 0.6% & <1.0% respectively) in accordance to DIN 8075, pipes wall thinckness as per EN-1519-1 (Indicated on pipe). The pipes are manufactures allowing maximum operating pressure condition of 20 C for 50 yrs, including all HDPE fittings i/c fixing (As per BS EN 12056, Part2) the pipe with clamps at 5.00 m spacing. This includes the cost of cutting,fusion welded (Electro Sleeve Coupling or butt Welding ) and making good the same complete as per direction of Engineer in Charge. 32 mm i/d\

Providing & Fixing HDPE (High Density Polyethylene) pipes in accordance to IS 1433:1996 EN 1519-1/EN 12666-1,pipes pressure (PE-80) & tempering (heat reversion radial & axial dimension; < 0.6% & <1.0% respectively) in accordance to DIN 8075, pipes wall thinckness as per EN-1519-1 (Indicated on pipe). The pipes are manufactures allowing maximum operating pressure condition of 20 C for 50 yrs, including all HDPE fittings i/c fixing (As per BS EN 12056, Part2) the pipe with clamps at 5.00 m spacing. This includes the cost of cutting,fusion welded (Electro Sleeve Coupling or butt Welding ) and making good the same complete as per direction of Engineer in Charge. 25 mm i/d

Supply of 65 HP Control panel of enclosure made out of 14 gauge in seimens gray shade power coating dust & vermin proof, in door free standing type suitable for 415 v AC 50 Hz supply system cable entry from top & bottom with incoming 160 AMP T 1 No, Volt meter 0-500-1 No AE AMP Meter 200/5 including required electrical item main switch, change over switch, capacitor, starter, electric wiring etc. complete in all respects

N.S. ITEM Supply, Erection,testing & commissioning of 1x36/40 watt 1220 mm long fluorecent tube T-5 fittings directly on wall including necessary connections with 0.75 sqmm PVC copper flexible cable for connecting the tube with the adjacent light point complete in all respects of engineer incharge of the work.Make:-Philips,Bajaj,GE,Wipro,K-lite,crompton greaves (356.00+0% = 356.00) SDS.

Providing & Fixing HDPE (High Density Polyethylene) pipes in accordance to IS 1433:1996 EN 1519-1/EN 12666-1,pipes pressure (PE-80) & tempering (heat reversion radial & axial dimension; < 0.6% & <1.0% respectively) in accordance to DIN 8075, pipes wall thinckness as per EN-1519-1 (Indicated on pipe). The pipes are manufactures allowing maximum operating pressure condition of 20 C for 50 yrs, including all HDPE fittings i/c fixing (As per BS EN 12056, Part2) the pipe with clamps at 5.00 m spacing. This includes the cost of cutting,fusion welded (Electro Sleeve Coupling or butt Welding ) and making good the same complete as per direction of Engineer in Charge. 90 mm i/d

Providing and fixing of water tap attacted with CPVC pipe 3/4" dia , 600mm above NGL connected with HDPE pipe upto 1.5m below ground level complete in all respect including Welding and T - connector and reducer cost with complete satisfaction of Engineer-in-charge

Providing and fixing water tank level guage for clear water tank for measuring the level of water (make kabir Instants and technologies) 6000

31.22 (ix) (Providing and fixing 25mmX6mm GI strips at 0.5 meters below ground level as strip earth electrode including soldering etc. as required .

31.24 (b) (iv) ( supply and erection of 60cmX60cm X6mm thick galvanised iron plate including necessary bolts and nuts to GI tape .

Fixing C.I. or Malleable Iron Step Including Carriage from stores of the Engineer-in-charge to the site of works and setting the same to correct lines and levels in the work embedded in 1:2 Cement and Sand Mortar 3.50 x 3 = 10.5, say 11

HSR 24.2.6.6 Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work.16 sqmm (15.00) SDS.

-New H.S.R 2021 (3.1.2 + 17.8.1 + 17.8.2) Good earth filling with carriage upto 4Km only Loading, Unloading, and Carriage of Materials By Mechanical Transport including loading, unloading and stacking Earth ROAD WORK Extra for laying earth/fly ash as per specifications in 20 cm layers and dressing but excluding the cost of rolling ROAD WORK Extra for watering the earth/fly ash laid in 20 cm layers as per specifications Extra for rolling to specifications

-NEW HSR 2021 (3.1.2) Loading Unloading & Carriage ( 93 + 33% ) = 123.69

-NEW HSR 2021(22.222.2.2):- Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.Single Socket Type B 110mm old SWR UPVC pipe lines laid complete

NEW HSR 2021(4.16.1.1):- Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Pipes, cables etc, not exceeding 80 metre mm dia.

NEW HSR 2021(6.33.6):- Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc.complete in all respect below plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing of water cooler with water purifier of brand like Blue star, Voltas, Usha etc. new

31.24(b) (v) ( Providing standard watering tank including down pipe and CI cover with locking arrangement s etc.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 5.23.2 Nominal concrete 1 :2:4 or leaner mix (i/c equivalent cum design mix

HSR 24.1.12 Supplying and laying 6 S.W.G G.I. wire at 0.50 m below ground level from earth electrode including thimbles, soldering etc. as required. (142.00) SDS

HSR 24.1.14 Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I. staples of same size. (69.00) SDS.

HSR 24.1.16 Supply and erection of 25mm dia 1.5 metre long lightning GI. tube rod tapered into a point at the top with 16cm x 16cm x 3mm thick G.I. base plate and necessary nuts and bolts with washers. (1006.00) SDS.

HSR 24.1.3 Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. (3772.00)SDS

MAKING OF HOUSEHOLD SEWER CONNECTION DAMAGED DURING EXCAVATION

MAKING OF HOUSEHOLD WATER CONNECTION DAMAGED DURING EXCAVATION

NEW HSR 2021(22.221.2):- Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect.Size 550 mm x 400 mm x 815 mm

NEW HSR 2021(22.222.2.4):- Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.Single Socket Type B 75mm old SWR UPVC pipe lines laid complete

NEW HSR 2021(24.1.1+24.1.2):- Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. + Extra for using salt and char coal/coke for pipe earth electrode as required

NEW HSR 2021(6.25.2) :- Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Less cement used as per design mix is recoverable.However no extra payment shall be made if excess cement is used as per design mix).All works above plinth level up to floor IV level

Providing & Fixing HDPE (High Density Polyethylene) pipes in accordance to IS 1433:1996 EN 1519-1/EN 12666-1,pipes pressure (PE-80) & tempering (heat reversion radial & axial dimension; < 0.6% & <1.0% respectively) in accordance to DIN 8075, pipes wall thinckness as per EN-1519-1 (Indicated on pipe). The pipes are manufactures allowing maximum operating pressure condition of 20 C for 50 yrs, including all HDPE fittings i/c fixing (As per BS EN 12056, Part2) the pipe with clamps at 5.00 m spacing. This includes the cost of cutting,fusion welded (Electro Sleeve Coupling or butt Welding ) and making good the same complete as per direction of Engineer in Charge. 50 mm i/d

Providing & Fixing HDPE (High Density Polyethylene) pipes in accordance to IS 1433:1996 EN 1519-1/EN 12666-1,pipes pressure (PE-80) & tempering (heat reversion radial & axial dimension; < 0.6% & <1.0% respectively) in accordance to DIN 8075, pipes wall thinckness as per EN-1519-1 (Indicated on pipe). The pipes are manufactures allowing maximum operating pressure condition of 20 C for 50 yrs, including all HDPE fittings i/c fixing (As per BS EN 12056, Part2) the pipe with clamps at 5.00 m spacing. This includes the cost of cutting,fusion welded (Electro Sleeve Coupling or butt Welding ) and making good the same complete as per direction of Engineer in Charge. 63 mm i/d

Providing and fixing Ductile Iron Double seal manhole covers and frames of 610 mm x 610 mm with locking arrangement on clear water tanks including cost of setting in cement concrete 1:2:4 to correct alignment and levels including carriage, loading, unloading etc. complete in all respects to the satisfaction of the Engineer-in-charge 750 x 600

Providing and fixing of 20 HP 4 Pole Fan Cooled Crane Duty Motor With proper positioning including the cost of Fixing and complete fitting to the nearest available point Note : Frequency - 50 Hz , Pole - 4 , Phase - 3 , Speed - 1500RPM , Voltage - 415V

Bidder Name

Amount

Narender Bhardwaj Contractor(GSTN-06AEIPB2526E1Z3)

Joginder Katarya(GSTN-NA)

JAI SHRI SHYAM ENTERPRISES(GSTN-NA)

Narender Bhardwaj Contractor

JAI SHRI SHYAM ENTERPRISES

JAI SHRI SHYAM ENTERPRISES

Narender Bhardwaj Contractor