Renovation of 02 sets of Toilet Blocks, Sewage line work at KV Janakpuri, New Delhi: 110058

NAME OF WORK: SEWAGE LINE WORK

SR. NO. ITEM DSR NDSR

1 SEWAGE PIPE WORK 2,148,080.00 -

Digitally signed by AMIT

1 Sewer Pipe Line Replacement

Dismantling G.I. pipes (external work) including excavation and

refilling trenches after taking out the pipes, manually/by

mechanical means including stacking of pipes within 50 metres

lead as per direction of Engineer-in-charge.

15.44.1 Dismantling G.I. pipes (15 mm to 40 mm nominal bore) Mtr 200.00 149.80 29,960.00 - -

Dismantling C.I. pipes including excavation and refilling trenches

after taking out the pipes, manually/by mechanical means

1.2 15.45 breaking lead caulked joints, melting of lead and making into

blocks including stacking of pipes & lead at site within 50 metre

lead as per direction of Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means in foundation trenches or drains (not

exceeding 1.5 m in width or 10 sqm on plan), including dressing

of sides and ramming of bottoms, lift up to 1.5 m, including

getting out the excavated soil and disposal of surplus excavated

soil as directed, within a lead of 50 m

Providing and laying in position cement concrete of specified

1.4 4.1 grade excluding the cost of centering and shuttering – All work

up to plinth level

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size).

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings. This includes

jointing of pipes & fittings with one step CPVC solvent cement,

trenching, refilling & testing of joints complete as per direction of

Engineer-in-Charge

18.9.6 50 mm nominal outer dia. Pipes Mtr 200.00 794.25 158,850.00 - -

18.9.8 75 mm nominal inner dia. Pipes Mtr 200.00 1,674.40 334,880.00 - -

18.9.9 100 mm nominal inner dia. Pipes Mtr 100.00 3,271.70 327,170.00 - -

18.9.10 150 mm nominal inner dia. Pipes Mtr 100.00 6,822.70 682,270.00 - -

Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20 cm in

depth, consolidating each deposited layer by ramming and

watering, lead up to 50 m and lift up to 1.5 m.

Digitally signed by AMIT

NAME OF WORK: RENOVATION OF TOILET (2 Nos.)

SUMMARY OF WORKS

SR. NO. NAME OF WORKS DSR AMOUNT NDSR AMOUNT

1 DISMANTALING 66,451.75 0.00

2 Civil Structural work 140,632.15 0.00

3 WATERPROOFING 98,547.20 0.00

4 FLOORING & WET WORKS 112,635.00 0.00

5 WALL FINISHING 289,962.50 0.00

7 ELECTRICAL WORKS 147,182.00 0.00

8 PLUMBING & Sanitary WORKS 562,469.75 0.00

Digitally signed by AMIT

NAME OF WORK: RENOVATION OF TOILET (2 SETS)

S.No. DSR REF. NO. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT

1 DISMANTALING

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable

material within 50 metres lead as per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkats, architrave, holdfasts etc.

complete and stacking within 50 metres lead.

15.12.1 Of area 3 sq. metres and below. Each 2 367.2 734.4

Dismantling existing flushing cistern (PVC / CI / low level / high level / concealed type) including disconnecting

1.3 15.52 water supply connections, fittings and making good the surface, complete as per direction of Engineer-in- each 20 112.05 2241

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of dismantled

material within 50 metres lead, as per direction of Engineer-in-Charge.

Dismetaling tiles work on floor and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10mm to 25mm

Demolish Cement concrete manually / by machanical means including disposal of material within 50 mtr lead as per

1.5 15.2.1 direction of EIC cum 5 2434.25 12171.25

Nominal concrete 1:3:6 or rich mix (incl. equivalent mix)

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting

rivets, welding etc., including dismembering and stacking within 50 metres lead.

Demolish Brick work manually / by machanical means including stacking of serviceable and disposal of unserviceable

material within 50 mtr lead as per direction of EIC

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means,

1.8 15.6 including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- CUM 10 263.95 2639.5

charge, beyond 50 m initial lead, for all leads including all lifts involved.

TOTAL OF DISMANTALING 66,451.75

2 Civil Structural work

PLAIN CEMENT CONCRETE(1:4:8) WITHOUT FLY ASH

2.1 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All

work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size

derived from natural sources)

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement

concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary

Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of

concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of

2.2 5.33 laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per

direction of the engineer-in-charge, for the following grades of concrete.:

Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In

case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall

have discretion to either re-design the mix or bear the cost of extra cement.

5.33.1 All works upto plinth level

5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum CUM 2.00 9,655.70 19,311.40

2.3 5.9 Centering and shuttering including strutting, propping etc. and removal of form for

b 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 35.00 736.60 25,781.00

Digitally signed by AMIT

S.No. DSR REF. NO. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all

complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. KG 200.00 107.85 21,570.00

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level

up to floor V level in all shapes and sizes in :

6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 5.00 9,344.35 46,721.75

TOTAL Civil structure work 140,632.15

3 WATERPROOFING

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen

and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in

recommended proportions including rounding off junction of vertical and horizontal surface.

3.1 22.3 (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in SQM 128.00 769.90 98,547.20

recommended proportion including rounding off junction of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to

Each other with bitumen @ 1.7 kg/sqm).

TOTAL water proofing work 98,547.20

4 FLOORING & WET WORKS

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid

on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including

grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond

cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system

and rubber mallet for placing the tiles gently and easily.

11.41A.3 Glazzed vetrified tiles matt/antiskid finish

Cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate

20 mm nominal size derived from natural sources

Total FLOORING & WET WORKS 112,635.00

5 WALL FINISHING

5.1 13.4 12 mm cement plaster of mix

Providing and fixing vetrified 1st Class Ceramic wall tiles conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved

by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3

coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with

pigment of matching shade complete.

Tiles Size : 600x1200 mm

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and

smooth complete.

5.4 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.

13.61.1 Two or more coats on new work SQM 80.00 155.90 12,472.00

Total wall finishing work 289,962.50

Digitally signed by AMIT

S.No. DSR REF. NO. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive)

as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200

mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,

other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size

and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm

centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each

6.1 12.45 having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate

channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long. Including jointing and finishing to

a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing

with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) SQM 10.00 1,355.80 13,558.00

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm

drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm

6.2 12.52.2 dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness SQM 48.00 2,068.75 99,300.00

60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber

acoustical fleece.

TOTAL OF CEILING 112,858.00

7 ELECTRICAL WORKS

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor,

single core cable in surface/ recessed steel conduit as required.

a 1.7.1 2x1.5sqmm+1x1.5sqmmearth wire Per mtr. 200.00 327.00 65,400.00

c 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Per mtr. 50.00 428.00 21,400.00

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections

but excluding modular plate etc. as required.

b 1.24.4 3 pin 5/6 A socket outlet Each 4.00 136.00 544.00

d 1.24.5 6 pin 15/16 A socket outlet Each 4.00 219.00 876.00

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess

etc. as required.

7.4 1.28 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of recessed conduit as required.

Installation, Testing and Commissioning of exhaust fan in the existing opening, including making good the damage,

connection, testing, commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of

following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Digitally signed by AMIT

S.No. DSR REF. NO. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT

7.8 1.5 LED Down lighter (COB Type) (System lumen efficacy ≥120 lm/Watt )

Supplying, installation, Testing & Commissioning of LED Recessed / surface Down lighter (Round / square/ Rectangular)

COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver

efficiency >85%, Operating voltage AC 140- 270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg

centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 ,

UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life

time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K

/6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should

not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.).

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house

NABL lab setup for all testing facilities for LED fixtures. "complete in all respect i/c connections with 1.5 sq mm FRLS, PVC

insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System

lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures

as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement.

(Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).

Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector

TOTAL OF ELECTRICAL WORKS 147,182.00

8 PLUMBING & Sanitary WORKS

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low

8.1 17.1 level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS :

7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests EACH 4.00 6,767.40 27,069.60

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved

8.2 17.78 shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre EACH 6.00 14,999.15 89,994.90

(adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free

ceramic surface, fixed with cartridge having debris catcher and hygiene seal.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved

17.7A quality and make, including painting of fittings and brackets, cutting and making good the walls wherever

(a) White Vitreous China Wash basin size 550x400 mm with a

15 mm CP Brass single hole basin mixer

8.5 17.7 Providing and fixing PTMT Bottle Trap for Wash basin and sink.

Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of

the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. Each

8.7 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

8.8 17.28.2 Flexible pipe

Digitally signed by AMIT

S.No. DSR REF. NO. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT

Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6

mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comelete.

18.21 Providing and fixing uplasticised PVC connection pipe with brass ions :

a 18.21.2 45 cm length

b 18.21.2.1 15 mm nominal bore Each 10 ₹ 97.75 977.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply

8.11 18.9 including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent

cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

a 18.9.4 32 mm nominal dia Pipes Metre 20.00 438.60 8,772.00

b 18.9.5 40 mm nominal dia Pipes Metre 20.00 563.05 11,261.00

c 18.9.6 50 mm nominal dia Pipes Metre 30.00 794.25 23,827.50

8.12 18.16 Providing and fixing brass stop cock of approved quality complete.

8.13 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved quality conforming to I.S:8931 a)

15 mm nominal bore.

8.15 18.74 Providing and fixing unplasticised P.V.C connection pipe with PTMT Nuts coller and bush of approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 25.00 121.90 3,047.50

Providing and fixing cast iron trap of self cleansing design with cast iron screwed down or hinged grating with or without

vent arm complete, including cost of cutting and making good the walls and floors.

17.60.1.1 100 mm inlet and 100 mm outlet centrifugally cast (spun) iron S&S as per IS 3989. Each 5.00 1,996.50 9,982.50

8.17 17.35 Providing and fixing soil, waste and vent pipes.

a 17.35.1 Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.1.2 100mm dia cast (spun) iron S&S pipe Metre 20.00 1,151.90 23,038.00

b 17.35.2 Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.2.2 75mm dia cast (spun) iron S&S pipe Metre 20.00 1,186.00 23,720.00

Providing and fixing single equal plain junction of reqd. degree with access door, insertion rubber washer 3mm thick, bolts

and nuts complete.

17.43.1.2 Sand cast (spun) iron pipe IS-3989 Each 10.00 925.70 9,257.00

17.43.2.2 Sand cast (spun) iron pipe IS-3989 Each 10.00 665.05 6,650.50

8.19 17.44 Providing and fixing single equal plain junction of reqd. degree.

17.44.1.2 Sand cast (spun) iron pipe IS-3989 Each 10.00 811.90 8,119.00

17.44.2.2 Sand cast (spun) iron pipe IS-3989 Each 10.00 561.20 5,612.00

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts

17.38.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 10.00 705.20 7,052.00

17.38.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 10.00 522.80 5,228.00

8.21 17.39 Providing and fixing bend of required degree .

Digitally signed by AMIT

S.No. DSR REF. NO. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT

17.39.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 10.00 470.45 4,704.50

17.39.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 10.00 390.50 3,905.00

8.22 17.57 Providing and fixing collar.

17.57.1.2 Sand cast (spun) iron pipe S&S IS-3989 Each 10.00 513.15 5,131.50

17.57.2.2 Sand cast (spun) iron pipe S&S IS-3989 Each 10.00 362.05 3,620.50

8.23 18.1 Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps. including cutting and making good the walls etc.

a 18.10.4 32 mm nominal bore Metre 20.00 667.00 13,340.00

b 18.10.5 40 mm nominal bore Metre 15.00 811.90 12,178.50

8.24 18.4 Painting G.I. Pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality

a 18.40.4 32 mm nominal bore Metre 20.00 22.20 444.00

b 18.40.5 40 mm nominal bore Metre 15.00 25.25 378.75

Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste and vent pipes and fittings with paint of any colour

such as chocolate, grey or buff etc. over a coat of primer (of approval quality) for new work

a 17.65.1 100mm dia cast (spun) iron S&S pipe Metre 20.00 82.80 1,656.00

b 17.65.2 75mm dia cast (spun) iron S&S pipe Metre 25.00 62.95 1,573.75

8.26 17.58 Providing lead caulked joints to sand cast iron/centrifugally cast(spun) iron pipes & fittings of diameter :.

8.27 17.36 Providing & filling the joints with spun yarn,cement slurry & cement mortar 1:2(1 cement: 2 fine sand) in SCI/CI pipes.

8.28 17.48 Providing and fixing single unequal plain junction of reqd. degree.

17.48.1.2 Sand cast (spun) iron pipe IS-3989 Each 10.00 1,032.40 10,324.00

TOTAL OF PLUMBING WORKS 562,469.75

Digitally signed by AMIT