PROVISION OF LIGHTING CONDUCTOR FOR STORAGE SHEDS (P-1 TO P-10) OF 583 ENGR PARK AT BHALUKMARA , HIGH MAST SECRUITY LIGHT AT MARIANI ,LICHUBARI AND ,VEHICLE PARKING SHED (P-21) AT LICHUBARI IN JORHAT MILITARY STATION UNDER GE JORHAT.

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed.

Excavation over area n.exc 1.50 M deep for foundations and getting out in soft/loose soil complete all as specified and directed.

Returning filling in soft/loose soil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all asspecified and directed.

Materials and Labour for plain cement concrete (1:4:8) Type D-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

Materials and Labour for reinforced cement concrete M-25 design mix in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete ,complete all as specified and directed.

Materials and Labour for reinforced cement concrete M-25 design mix in columns; pillars; piers; posts; struts etc,complete all as specified and directed.

Materials and Labour for reinforced cement concrete M-25 design mix in beam , lintels over 1.5m span,cantilivers,bressummers etc complete all as specified and directed.

Materials and Labour for reinforced cement concrete M-25 design mix in chajjas,complete all as specified and directed.

M&L DPC 40mm thick to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4 type B1 complete all as specified and as directed

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6), complete all as specified and directed.

Use and waste of form work to chullah hoods, chajjas,troughs and similar items including edges for fair finished surfaces of concrete, flat, complete all as specified and directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete, square, rectangular or polygonal, complete all as specified and directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sided and soffits of plinth beams and similar works; vertical or to batter for rough finished surfaces of concrete, flat, complete all as specified and directed.

M&L for use and waste of form work to sides and soffits of floor/plinth of roof beam, lintels, cantilevers, shelves including supports, overhangs, etc. for fair finished concrete surfaces complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

Supply and fix mild steel TMT bars 5 mm dia. and over up to and including 10 mm dia. in stirrups, spacers, binders etc. cut to length, bend to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded aggregate as in sub base in floor/paving/hardstanding , complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded aggregates as in plinth protection including finishing surface even and smooth without using extra cement complete all as specified and directed.

M & L 100 mm thick cement concrete 1:2:4 Type B1 ( using 20 mm graded stone aggregates) as in flooring laid in alternate panels including necessary formwork, finished even and smooth without using extra cement complete all as directed.

M&L for machine pressed precast concrete interlocking colour paver block 60mm thick with Grey cement and pigment any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 Grade. with and including 100mm thick approved sand cushioning for laying of paver block complete all as specified and as directed.

Materials and Labour for, broken stone or boulder hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface , complete all as specified and directed.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork in walls and finishing surface even and smooth without using extra cement, complete all as specified and directed.

Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed (Make : CICO No- 1/SIKA/ACCO PROOF).

Materials and labour for preparation of new surfaces of Wall and applying two coats of weather coat exterior grade paint over and including one coat of primer complete all as specified and directed.

Material and Labour for applying three coats of white wash to new plastered surfaces on walls including preparation of surfaces complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc including connecting plate. complete using ERW or induction butt welded tubes conforming to IS-1161 1979 grade st 240 with one shop coat red oxide primer complete all as specified and as directed

Supply and Fix, mild steel screw bolts (machine made), with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, diameter of shank n.exc 22.5 cm, length of bolt n. exc. 30cm long, complete all as specified and directed.

Materials and Labour for rolled mild steel , conforming to Fe 410-W (Grade E-250) quality-A, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guide for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws, complete all as specified and directed.Make(Tata bluescope/Sexena Marine Tech or equivalent make)

Material and Labour for pre-painted, hot dip at Zinc alloy aluminium zinc coating GI based as per IS 15965-2012 of durability class 3,atmospheric classicfication category-3 coating class AZ 150 mm 0.5mm thick of an approved colour , having tensile strength of 550 Mpa, as in roof as in ridge/Valley/gutter and Eve board , fixed with self-tapping screws, complete all as specified and directed.Make(Tata bluescope/Sexena Marine Tech or equivalent make)

Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

M&L DPC 40mm thick to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4 type B1 complete all as specified and as directed.

Material and labour for earthing complete with galvanised iron earth plate electrode of size 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connected with and including galvanised earth strip of size 32 x 6 mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20 mm bore galvanised iron pipe (light grade) wire mesh, charcoal or coke and common salt in alternate layer of 15 cm (compacted thickeness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20 mm graded aggregate), 50 mm thick precast RCC (1:2:4) cover slab (re-inforced with 8 mm dia complete all as shown and specified in electrical plate No-5 of SSR part-I of 1991. NOTE:- The unit rate includes earthing lead and protection pipe i.e. GI pipe, light grade, 40 mm bore upto 7.5 metre from top of earth plate.

Material and labour for earthing complete with galvanised iron earth plate electrode of size 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connected with and including galvanised earth strip of size 25 x 4 mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20 mm bore galvanised iron pipe (light grade) wire mesh, charcoal or coke and common salt in alternate layer of 15 cm (compacted thickeness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20 mm graded aggregate), 50 mm thick precast RCC (1:2:4) cover slab (re-inforced with 8 mm dia complete all as shown and specified in electrical plate No-5 of SSR part-I of 1991. NOTE:- The unit rate includes earthing lead and protection pipe i.e. GI pipe, light grade, 40 mm bore upto 7.5 metre from top of earth plate.

M & L for Earthing complete with and including galvanized steel plate electrode 600 mm x 600 mm x 6 mm, surrounded by mixture of charcoal and salt in alternate layers, buried directly in ground vertically in a pit of depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth of not less than 1.50 metre below ground level connected to galvanized iron or steel earth wire, 4 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 20 mm bore (Light grade) & connected to main switch or main control board all as shown in electrical plate No. 5 of SSR-1991 Part I & including necessary excavation & earth work. The rate also include charcoal & salt in alternate layers, 20 mm bore GI pipe (Light gde) for watering, protection pipe , funnel, wire mesh, PCC 1:2:4 type B-1 chamber in cement concrete, 50 mm thick precast RCC M-25 (Design Mix) cover ,duly reinforced with XPM (weight not less than 3 Kg/Sqm)and CI frame etc,and including provision of test point, connecting to test point and testing on completion etc, complete all as specified and directed NOTE:- The unit rate includes earthing lead and protection pipe i.e. GI pipe, light grade, 20 mm bore upto 7.5 metre from top of earth plate. [earthing for equipments i.e. feeder pillar box/panels/DBs/LT poles etc]

Material and labour for earth continuity conductor or main earthing strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed with poles or any other indicated situation for loop earthing etc as required using aluminium strip of size 25 x 3 mm including necessary drilling works, jointing, base insulators etc and making good as disturbed surfaces complete all as specified and directed.

S&F galvanised iron strip of size 32x6 mm buried in ground or fixed on wall mounted on suitable sized porcelain insulators (on floor and wall only) incl. cutting cavities for fixing of porcelain insulators and finishing with cement plaster on wall/floors and connected to test point including bending, jointing at test point with GI nut, bolts, lead, washer, jointing strip at all joints including making good the disturbed surfaces complete.

S&F air termination single pointed aluminum rod of 12mm dia, 300mm long fixed with 02 nos suitable sized nuts, bolts & washers incl. making good the disturbed surfaces complete all as specified and directed.

Supply and fix air termination, single pointed aluminium rod 12 mm dia and 450 mm long fixed with 02 nos suitable sized nuts, bolts & washers incl. making good the disturbed surfaces complete all as specified and directed.

Supply and fix air termination, single pointed aluminium rod 12 mm dia and 600 mm long fixed with 02 nos suitable sized nuts, bolts & washers incl. making good the disturbed surfaces complete all as specified and directed.

S&F Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. head screw complete all as specified and directed.

M & L for 50mm bore `light grade` galvanised tubes with all fitting, laid in trenches/under road/along pole/wall with and inclding Flat iron of size 25mm X 6mm clamps complete all as specified and directed. (Make Tata/Jindal or equivalent make)

M & L for 40mm bore `light grade` galvanised tubes with all fitting, laid in trenches/wall/floor complete all as specified and directed. (Make Tata/Jindal or equivalent make)

Supply and fixing GI pipe medium grade 20 mm bore laid in trenches/wall/floor alongwith connected all fittings complete all as specified and directed. Make Tata/Jindal or equivalent make)

Supply and fix plug type bib taps, cast iron, screwed of 20 mm bore size complete all as specified and directed

M&L for cutting existing GI pipe 80 mm Bore (dia) in position for taking out branch connectionof 20 mm bore (dia), inserting 1 No. GI Tee of size 80x80x20 mm with and including providing new reducting tee, all joints and jointing materials, and necessary excavation and earth work complete all as specified and as directed.

M&L for cutting existing GI pipe 40 mm Bore (dia) in position for taking out branch connectionof 20 mm bore (dia), inserting 1 No. GI Tee of size 40x40x20 mm with and including providing new reducting tee, all joints and jointing materials, necessary excavation and earth work complete all as specified and as directed.

M&L for cutting existing metal /bituminus road/PCC hard standing or tile wall any type n.exc 1.5m width and n.exc 1.5m in depth in hard rock including all connected earth work and making good disturbed surfaces mathching with the existing specification and finish including disposal of surplus material to a distance n.exc 50m complete all as specfied and directed.

M&L for 15mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

Supply, fixing and testing of 80 Watt LED highbay luminaire with aluminium reflector, CCT (K) 5000 complete all as specified and directed. Make : Wipro cat Part No. LH09-102-060-50-G1 or equivalent make Philips or equivalent make as approved by GE.

Designing, supplying, erecting, installing, testing and commissioning hot dip galvanized as per IS 4759 polygonal cross section, 16 meter high mast shaft conforming IS 5986 (Steel Gr BSEN 10025-S355JO ), Minimum size bottom dia 410 mm, top dia 150 mm high mast shaft/ pole including lantern carriage to fix 8 Nos of LED flood light fitting in symmetrical arrangement, junction box, lowering & raising mechanism,double drum winch,6 mm dia SS wire rope, trailing cable, connector, integral power tool motor, manual handle, lightening final, prewired complete with multi stranded copper conductor cable 1.5 sqmm size, , cable, power tools, lightning finial, aviation light, earthing terminal, feeder pillar, 1 HP, 3 phase motor, both motorises and manual mechanism, mounting base plate 560 mm X 560 mm X 25 mm built in, foundation bolt M 24 X 850 mm manufactured from special steel of EN-8 and Hot Dip Galvanised along with nuts, washers, anchor plates and templates. including designing for dead load, live load, wind load, seismic load as per the relevant Indian Standards, erecting by making foundation using M25 (Design Mix) concrete using 20 mm nominal size crushed stone aggregate, TMT bars shall be desigined for safe bearing capacity of 5 tonne per square metre at 2 metre depth and provided accordingly as per manufacturer designed with and including other accessories as per manfucaturer instruction shall be provided without any extra cost to department complete all as specified and as directed. (Note : Aviation light, Feeder pillar shall be measured and paid for separately .) Make of company shall be approved by MES and conforming to concerned IS standard .

Supply install testing and commissioning 150W LED 6000K flood light IP66 with the help of suitable accessories electrical wiring of luminaries with all wiring materials complete all as specified and directed by Engr-in-charge. Make :- Havells cat part No LHEPCZU7P46J150 or Bajaj/Philips.

Supply install, testing and commissioning Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure, all as specified and directed. Make Bajaj Cat Part No 110731 BGAV 302 LED or Havells/Philips.

Supply and fix LED street light 35 W IP 65 New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driver Make :Havells ca part no.-ENDURACITY35WLED757SASYBOPC or equivalent make Philips/CG .

Supply and fix LED street light 90 W IP 65 New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driver Make :Havells cat part no-ENDURACITYLINENEOSL90WLED757SASYBOTG or equivalent make Philips/CG

Supply install , testing and commissioning of out door stand mounted feeder pillar with 63 A TPN MCB incomer L&T Cat Part No BB40630C. Astronomical Time Switch 110-240 V 1 C/O -2 Mod L&T Cat Part No T2DDT7 power contactor 40 amps for automatic switching of luminaries power tool control with 2 Nos 18 Amp Contactors L&T Cat Part No CS94100 and raise lower push button incoming 35 Sq mm and out going 16 & 25 sq mm terminals all as specified and directed.

Supply and laying in trenches/pipes/along wall/roof/across drain/culvert XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 35 Sqmm 3.5 core including with suitable size of Aluminium lugs complete all as specified and directed.Make Havells/ Finolex/KEI

Supply and laying in trenches/pipes/along wall/roof/across drain/culvert XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area of size 25 sqmm 4 core complete all as specified and directed.Make Havells/ Finolex/KEI

Supply & spreading in trenches dry river sand cushioning to underground cable in trenches including spreading, levelling hand punning down complete all as specified and directed Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly.

M & L for laying of bricks locally available sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable all as directed.

Material and Labour earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in round or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x3mm aluminium strip icluding insulator and connection to finial etc as directed..

Materials and Labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanised steel earth lead wire 4 mm dia. by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009)

M/S PS ENTERPRISE

M/S MEGHALAYA ENGINEERS AND AGENCIES

THE SUPPLY AGENCY

M/S BARUA REFRIGERATION WORKS

Raj Enterprises