Repair/Replacement to Internal Wiring, DBs, LT UG Cables, Service Cables and other Connected works Bharatpur line at Mil Stn Dharamshala

Amount

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators sockets, lamp holders brackets, bulk head fittings etc removing material for taking credit (credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc, complete all as specified and as directed by the Engr-in-charge.

M&L for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheathed FRLS electric cable 1100 volts cable and including PVC casing and caping of suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core(Green colour) cable as continuous earth wire connected to common earth dolly including wooden box covered with 3 mm thick plastic laminated sheet for one light point/ fan/exhaust fan point/ bell point etc controlled by one, one way switch,complete all as specified and as directed by the Engineer-in-Charge. Note : (i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost.

All as per item No 2 here-in-above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches, complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 02 here-in-above, but for one 3/5 pin socket outlet 5 Amp on independent board, complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 02 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly, complete all as specified and as directed by Engineer-in-Charge.

M&L for switch Socket combination 2 in 1, 5 Amp and 15 Amp, flush type, complete all as specified and as directed by the Engineer-in-Charge.

M&L for switch Socket combination 2 in 1, 5 Amp, flush type complete all as specified and as directed by the Engineer-in-Charge.

M&L for switch piano, flush type, single pole, one way, 5/6Amp, complete all as specified and as directed by the Engineer-in-Charge.

M&L for Bell push switch, flush button, single pole, one way 5 Amps, complete all as specified and as directed by the Engineer-in-Charge.

M&L for ceiling rose, surface type, 65 mm x 50 mm, two to three terminals PVC polycarbonate, isolated body fixed on PVC block, complete all as specified and as directed by the Engineer-in-Charge.

M&L for sub main wiring in PVC casing caping/conduit with 2 Nos single core PVC insulated copper conductor cable flame proof size 4 sqmm multistrand and 2.5 sqmm PVC insulated flame proof earth wire using suitable size of copper thimble, complete all as specified and directed by the Engr-in-charge.

Supply & fix (in replacement) of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar, complete all specified and as directed by the Engineer-in-Charge. Note: (i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. (ii) The disturbed surface shall be match with existing shall be part of job.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of current carrying capacity SP 5 to 32 Amp MCB, complete with connection testing and commissioning complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of current carrying capacity SPN 32 Amp MCB, complete with connection testing and commissioning complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed by the Engr-in-charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed by the Engr-in-charge.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by the Engr-in-charge.

M&L for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 15/18 watts for batten fitting, including plastic square board of required size, complete all as specified and directed by the Engr-in-charge.

Supply and fix 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 10sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular,complete all as specified and directed by the Engr-in-charge.

M&L for call bell ding dong AC 230 volt single pole, complete all as specified and directed by the Engr-in-charge.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I & as directed by Engr-in-Charge

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with DB’s suitable for MCBs of triple pole and neutral 4 way, 415 volt, double door type with 200 amp rated bus bar with one incoming and 12 outgoing Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job.

Supply and fix in replacement of MCB TPN/FP 40 to 100 Amp, complete all as specified and directed by the Engr-in-charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete & as directed by Engr-in-Charge

smc engineering company

Mahashakti Enterprises

ess are electricals and electronic

KISHAN CONTRACTOR

Krithvik Electricals

M/S LASHKAR SINGH DEO

KONARK ENTERPRISES

M/S MALHI CONSTRUCTIONS