Repair/Replacement pipe lines control valves, pumping system and switchgear installed at B Reservior area under GE (Utilities) Udhampur

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. and taking out/laying of pipe lines of soft/loose soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layer not exceeding 25cm thick after pipes have been laid and tested complete all as specified and directed by Engr-in-Charge.

Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

Taking up or down CI/DI/MS water mains pipe 200 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) Unserviceable items retrieved from site should be deposited in MES store by the contractor. (iii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

Refixing MS/DI/CI pipe obtained from item No. 4 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 200 mm bore complete inlcuding main / branch connections complete all as specified and directed by Engr-in-Charge.

Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 200 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked alongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified directed by Engr-in-Charge.

Taking up or down old unseviceable GI pipe of size 150 mm dia including all fittings complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

Refixing GI/CI pipe obtained from Item No. 07 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 150 mm dia complete including main branch connections complete all as specified and directed by Engr-in-Charge.

Supply & fixing GI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge.

Taking up or down old unseviceable GI pipe of size 100 mm dia including all fittings complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

All as per serial item No 10.00 here-in-before but of size 80 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 10.00 here-in-before but of size 50 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 10.00 here-in-before but of size 40 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 10.00 here-in-before but of size 25 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 10.00 here-in-before but of size 20 mm dia complete all as specified and directed by Engr-in-Charge.

Refixing GI/CI pipe obtained from Item No. 10 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 100 mm dia complete including main branch connections complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 16.00 here-in-before but of size 80 mm dia obtained from item No. 11 complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 16.00 here-in-before but of size 50 mm dia obtained from item No. 12 complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 16.00 here-in-before but of size 40 mm dia obtained from item No. 13 complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 16.00 here-in-before but of size 25 mm dia obtained from item No. 14 complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 16.00 here-in-before but of size 20 mm dia obtained from item No. 15 complete all as specified and directed by Engr-in-Charge.

Supply & fixing GI pipes of size 100 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 22.00 here-in-before but of size 80 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 22.00 here-in-before but of size 50 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 22.00 here-in-before but of size 40 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 22.00 here-in-before but of size 25 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 22.00 here-in-before but of size 20 mm dia complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 300 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position complete all as specified and directed by Engr-in-Charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item.

Stem bush bronze complete all as specified and directed by Engr-in-Charge.

Gland Flange cast iron complete all as specified and directed by Engr-in-Charge.

Stud/Bolt carbon steel complete all as specified and directed by Engr-in-Charge.

Stem nut/chaknut complete all as specified and directed by Engr-in-Charge.

Stem Stain less steel complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 250 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item.

Stem bush bronze complete all as specified and directed by Engr-in-Charge.

Gland flange cast iron complete all as specified and directed by Engr-in-Charge.

Stud/Bolt carbon steel complete all as specified and directed by Engr-in-Charge.

Stem nut/chaknut complete all as specified and directed by Engr-in-Charge.

Stem Stain less steel complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 200 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engr-in-Charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item.

Stem bush bronze complete all as specified and directed by Engr-in-Charge.

Gland flange cast iron complete all as specified and directed by Engr-in-Charge.

Stud/Bolt carbon steel complete all as specified and directed by Engr-in-Charge.

Stem nut/chaknut complete all as specified and directed by Engr-in-Charge.

Stem Stain less steel complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 150 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engr-in-Charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item.

Stem bush bronze complete all as specified and directed by Engr-in-Charge.

Gland flange cast iron complete all as specified and directed by Engr-in-Charge.

Stud/Bolt carbon steel complete all as specified and directed by Engr-in-Charge.

Stem nut/chaknut complete all as specified and directed by Engr-in-Charge.

Stem Stain less steel complete all as specified and directed by Engr-in-Charge.

Supply fabrication and fixing MS joints like bends Tee, tapers, collars, elbow, tail piece (any type) caps, plugs up to 100 mm to 150 mm bore. complete all as specified and directed by Engr-in-Charge.

Supply and fix Nut bolt M-16 (50mm length) & M-20 (75mm length) with 02 (each 5mm thick) Nos washer at each set complete all as specified and directed by Engr-in-Charge.

Supply and fixing leather gasket including replacement old UNSV gasket for 200 mm complete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation for replacement of gaskit work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.

Supply and fixing leather gasket including replacement old UNSV gasket for 150 mm complete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation fo rreplacement of gaskit work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.

Supply and fix in replacement of cast iron non return valve suitable for 300 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing. Item Art No : 1083C. complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

All as per serial item No. 36.00 here-in-before but of size 250 mm dia and Item code No/ Size CI 026/L complete all as specified and directed by Engr-in-Charge.

All as per serial item No 36.00 here-in-before but of size 200 mm dia and Item code No/ Size CI 026/L complete all as specified and directed by Engr-in-Charge.

All as per serial item No 36.00 here-in-before but of size 150 mm dia and Item code No/ Size CI 026/L complete all as specified and directed by Engr-in-Charge.

M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 300 mm bore by providing new lead ,using good quality spun yarn, including necessary excavation, returning filling in trenches in any type of soil,bailing out water, and at any depth complete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate. (ii) Required extra fittings/pipe will be measured and paid separately.

All as per serial item No. 40.00 here-in-before but of dia 250 mm bore pipe complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 40.00 here-in-before but of dia 200 mm bore pipe complete all as specified and directed by Engr-in-Charge.

All as per serial item No 40.00 here-in-before but of dia 150 mm bore pipe complete all as specified and directed by Engr-in-Charge.

Material and labour for repair to leaking flanged/circular welding joints of 100 to 200 mm bore MS/GI pipe line by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning filling in trenches in any type of soil, bailing out water, and any depth complete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate. (ii) Required extra pipe will be measured and paid separately.

All as per serial item No 44.00 here-in-before but of dia 250 to 300 mm bore pipe complete all as specified and directed by Engr-in-Charge.

S&F of Gun-metal, globe or gate valves, 50 mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), complete all as specified & directed by Engr-in-Charge.

All as per serial item No 46.00 here-in-before but upto 40 mm bore complete all as specified and directed by Engr-in-Charge.

All as per serial item No 46.00 here-in-before but upto 25 mm bore complete all as specified and directed by Engr-in-Charge.

All as per serial item No 46.00 here-in-before but upto 20 mm bore complete all as specified and directed by Engr-in-Charge.

All as per ser item No 46 above but upto 15 mm bore complete all as specified and directed by Engr-in-Charge.

M&L for cutting of existing road for crossing of MS/DI/CI/GI pipes for laying of any size pipes including necessary exacavation and earth work including repairing the same as per existing complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pole & stay complete all as specified and directed by Engr-in-Charge.

M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg complete all as specified and directed by Engr-in-Charge.

Supply and fixing GI fittings medium grade ISI marked including complete all as required at site and as directed by Engr-in-Charge.

Elbow 15mm.

Elbow 20mm.

Elbow 25mm.

Elbow 40mm.

Elbow 50mm.

Elbow 80mm.

Socket 15mm.

Socket 20mm.

Socket 25mm.

Socket 40mm.

Socket 50mm.

Socket 80mm.

Union 15mm.

Union 20mm.

Union 25mm.

Union 40mm.

Union 50mm.

Union 80mm.

Elbow reducer 20 x 15mm.

Elbow reducer 25 x 20mm.

Elbow reducer 40 x 25mm.

Socket reducer 25x20mm.

Socket reducer 40x25mm.

Socket reducer 40x20mm.

Socket reducer 50x25mm.

Nipple 15 x50mm.

Nipple 15 x100mm.

Nipple 20 x50mm.

Nipple 20 x100mm.

Nipple 25 x 50mm.

Nipple 25 x 100mm.

Nipple 40 x 50mm.

Nipple 40 x 100mm.

Nipple 50 x 50mm.

Nipple 50 x 100mm.

Tee 15mm.

Tee 20mm.

Tee 25mm.

Tee 20x15mm.

Tee 25x20mm.

Tee 40x15mm.

Tee 40x20mm.

Tee 40x25mm.

Tee 50x25mm.

Dead plug 15mm.

Dead plug 20mm.

Dead plug 25mm.

Dead plug 40mm.

Dead plug 50mm.

Lead wool.

Decoupling, disconnecting suction line and discharge line taking down from foundation bolts, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of pump sets. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line re-alignment commissioning and testing in respect of centrifugal/multistage pump of capacity 60/75/100HP. HP all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of parts shall be measured and paid separately under respective item of sch 'A'.

All as per serial item No 55.00 here-in-before but of capacity 30/40/50HP complete all as specified and directed by Engr-in-Charge.

All as per serial item No 55.00 here-in-before but of capacity 25/20/15/12/10HP complete all as specified and directed by Engr-in-Charge.

All as per serial item No 55.00 here-in-before but of capacity 7.5/5HP/3HP complete all as specified and directed by Engr-in-Charge.

Supply & Fix parts in repair for single/double/multistage pumps of capacity 60/75/100 HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engr-in-Charge.

Pump impeller made out of Bronze complete all as specified and directed by Engr-in-Charge.

Pump shaft stainless steel shaft complete with check nut and keys complete all as specified and directed by Engr-in-Charge.

Tyre coupling complete all as specified and directed by Engr-in-Charge.

Star coupling complete all as specified and directed by Engr-in-Charge.

Gland cup with nuts and bolts complete all as specified and directed by Engr-in-Charge.

Shaft sleeves complete all as specified and directed by Engr-in-Charge.

Bearing housing complete all as specified and directed by Engr-in-Charge.

S&F parts for single/double/multistage pumps of capacity 60/75/100 HP as per manufacturer's composition of existing make of pump as below all as specified and directed by Engr-in-Charge.

Pump impeller made out of Bronze complete all as specified and directed by Engr-in-Charge.

Pump shaft stainless steel shaft complete with check nut and keys complete all as specified and directed by Engr-in-Charge.

Tyre coupling/star coupling complete all as specified and directed by Engr-in-Charge.

Gland cup with nuts and bolts complete all as specified and directed by Engr-in-Charge.

Shaft sleeves complete all as specified and directed by Engr-in-Charge.

Bearing housing complete all as specified and directed by Engr-in-Charge.

Star coupling complete all as specified and directed by Engr-in-Charge.

S&F parts for single/double/multistage pump of capacity 30/40/50HP as per manufacturer's composition of existing make of pump as below all as specified and directed by Engr-in-Charge.

Pump impeller made out of Bronze complete all as specified and directed by Engr-in-Charge.

Pump shaft stainless steel shaft complete with check nut and keys complete all as specified and directed by Engr-in-Charge.

Shaft sleeves complete all as specified and directed by Engr-in-Charge.

Casing bearing complete all as specified and directed by Engr-in-Charge.

Bearing housing complete all as specified and directed by Engr-in-Charge.

Tyre coupling/star coupling complete all as specified and directed by Engr-in-Charge.

Gland cup with nut and bolts complete all as specified and directed by Engr-in-Charge.

Star coupling complete all as specified and directed by Engr-in-Charge.

S&F parts for single/double stage pump of capacity 25/20/15/12/10HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by engr-in-Charge.

Pump impeller made out of Bronze complete all as specified and directed by Engr-in-Charge.

Pump shaft stainless steel shaft complete with check nut and keys complete all as specified and directed by Engr-in-Charge.

Shaft sleeves complete all as specified and directed by Engr-in -Charge.

Casing bearing complete all as specified and directed by Engr-in -Charge.

Bearing housing complete all as specified and directed by Engr-in -Charge.

Tyre coupling/star coupling complete all as specified and directed by Engr-in -Charge.

Star coupling complete all as specified and directed by Engr-in -Charge.

Gland cup with nut and bolts complete all as specified and directed by Engr-in -Charge.

S&F parts for single/double stage pump of capacity 7.5/5HP/3HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engr-in-Charge.

Pump impeller made out of Bronze complete all as specified and directed by Engr-in-Charge.

Pump shaft stainless steel shaft complete with check nut and keys complete all as specified and directed by Engr-in-Charge.

Shaft sleeves complete all as specified and directed by Engr-in-Charge.

Casing bearing complete all as specified and directed by Engr-in-Charge.

Bearing housing complete all as specified and directed by Engr-in-Charge.

Tyre coupling/star coupling complete all as specified and directed by Engr-in-Charge.

Star coupling complete all as specified and directed by Engr-in-Charge.

Gland cup with nut and bolts complete all as specified and directed by Engr-in-Charge.

Disconnecting electric connection of 60/75/100 HP motor, removing the UNSV motor from existing place by unscrewing the foundation bolts and nuts decoupling from the pump, setting aside and transporting to workshop for repairs including dismantling the motor,cutting/taking out burnt winding of stator, rotor, cleaning the slots, transporting back after repair/winding & re-assembling the same. Cost of loading, unloading & transportation shall be deemed included in the quoted rates. complete all as directed by Engineer-in-Charge. Note: Winding of motor stator & rotor shall be measured & paid separately.

(a) Rewinding of motor will be measured and paid separately under relevent item. (b) The motor shall be squerrel cage induction motor. (c) The rates quoted shall be deemed to include the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed. (d) Replacement of u/s bearings and grease completely. (e) The contractor shall be arranged a workshop visit of Engr-in-Charge for each job and cutting complete burnt winding of motor in presence of Engr-in-Charge.

All as per serial item No. 64.00 here-in-before but of capacity 30/40/50HP motor complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 64.00 here-in-before but of capacity of 25/20/15/12/10HP motor complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 64.00 here-in-before but of capacity of of 7.5/5HP/3HP motor complete all as specified and directed by Engr-in-Charge.

Removing the burnt out winding from the rotor and stator, cleaning the slots, providing high quality of class 'B' paper insulation inside the slots, rewinding the motor of capacity 100/75/60/50/40/30/25/20/15/12/10/7.5/5HP/3HP with super enamel copper wire of same size and guage as per existing rapping up with high quality cotton tape and varnising with super quality oil including drying upto desired temperature and desired time complete all as specified and directed by Engr-in-Charge. Note:- Cost of labour for winding deemed to be included in the rate quoted.

S&F in replacement of Pump bearing No. 6307 C3 including taking down the old existing bearing complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Pump bearing No. 6308 2RS1/C3 including taking down the old existing bearing complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Pump bearing No. 6309 M/C3 including taking down the old existing bearing complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Motor bearing No. 6310 M/C3 including taking down the old existing bearing complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Motor bearing No. 6311 C3 including taking down the old existing bearing complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Motor bearing No. NU 304 ECP including taking down the old existing bearing complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of terminal box suitable for 60/75/100HP motor as per existing specification including taking down the old existing terminal box complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of terminal box suitable for 30/40/50HP motor as per existing specification including taking down the old existing terminal box complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of terminal box suitable for 20/15/12 HP motor as per existing specification including taking down the old existing terminal box complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MS stud bolts of existing size with nuts suitable for pumps and motors of various capacity installed at installations complete all as specified and directed by Engr-in-Charge.

M&L for spray painting of pump and motor, frame including surface preparation by scrapping with hamery paper or grinder with two coat of synthethic enamel paint over one coat of red oxide primer of existing colour of approved make to the satisfaction complete all as specified and directed by Engr-in-Charge.

M&L for writing the with brush about the machinery installed in different instalations eg Cap, discharge,MES No,Year of installation and head of the machinery on the wall in front of the pump motor with black paint including removing the existing paint with help of grinder complete all as specified and directed by Engr-in-Charge.

M&L in replacement of aluminium lugs suitable for 240 Sqmm aluminium cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge.

M&L in replacement of aluminium lugs suitable for 185 Sqmm aluminium cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge.

M&L in replacement of aluminium lugs suitable for 95 Sqmm aluminium cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge.

Supply and laying in replacement of synthetic rubber insulated mats 10 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006,( superseding IS 5424) suitable for electrical shock safety of sizes 2mx1m complete all as specified and directed by Engr-in-Charge.

Supply and fix Gland packing type 3 of size 12 mm made of asbustus grip with silicon complete all as specified and as directed by Engr-in-Charge.

All as per serial item No 85.00 here-in-before but of size16 mm thick complete all as specified and directed by Engr-in-Charge.

Supply and lay DWC (Double wall corruguated) pipe 77/63 mm conforming to IS: 14930/IS 16205 for protection of earth strip/cable including necessary snap-fit coupler reqd for fixing complete all as specified and as directed by Engr-in-Charge

Supply and lay DWC (Double wall corruguated) pipe 90/63 mm conforming to IS: 14930/IS 16205 for protection of earth strip/cable including necessary snap-fit coupler reqd for fixing complete all as specified and as directed by Engr-in-Charge

Supply and lay DWC (Double wall corruguated) pipe 110/93 mm conforming to IS: 14930/IS 16205 for protection of earth strip/cable including necessary snap-fit coupler reqd for fixing complete all as specified and as directed by Engr-in-Charge

Supply and fix in replacement of CI foot valve of size 250 mm dia including all jointing materials like high pressure rubber gasket nuts, bolts, washers suitable for 250mm dia pipe with arrangement for fixing, including taking down complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 90.00 here-in-before but of size 200 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 90.00 here-in-before but of size150 mm dia complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pole & stay complete all as specified and directed by Engr-in-Charge.

M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 95 sqmm inculding taking down existing old unserviceable cable of complete all as specified and directed by Engr-in-Charge.

All as per serial item No 94.00 here-in-before but of size 70 Sqmm complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 94.00 here-in-before but of size 50 Sqmm complete all as specified and directed by Engr-in-Charge.

Supply only lithium base grease AP3 in 20 Kg pack suitable for application to ball bearing with operating temp 30 to 120 degree celsious drop point 174 degree celsious, colourlight fawn complete all as specified and as directed by Engr-in-Charge.

PAUL TRADERS

SHARMA SALES CORPORATION

K S BUILDERS

EAST URBAN ENGINEERING