Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹3.7 Cr
Closing Date
27 Nov 2026, 11:00 am
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
System
Normal Tender Single Packet
No
Not Applicable
60 days
Expenditure
Capital (Works)
SIGNAL
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of 'V/N' or 'V' whichever is less; where, V= Advertised value of the tender in crores of Rupees & N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-C, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Non-submission of the Annexure-C, or submission of Annexure-C either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer.)
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/ registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any indoor or/and outdoor Electrical Signalling Work for provision of RRI/PI/EI/MACLS/Track Circuit/Axle Counter/BPAC/Double Distant/LC Gate Interlocking/IBH/Automatic Signalling Works.
52 conditions · 3 needing a document upload
Whether the Standard format of the certificate submitted as per Annexure-V & V(A)
Whether the Requirement of Registration submitted as per ANNEXURE-6.
OEM Certificate for installation before commissioning shall be obtained as advised by RDSO/TAN's.
Rates provided in schedule is as per budgetary offers, so rate of item provided in schedule will be compared against market rate available during finalisation of tender.
Payment will be made as per Annexure-XA.
I hereby confirm that I have thoroughly reviewed the scope of work detailed in the tender documents. I have understood all technical, operational, and field-related requirements as specified.
Whether the Certificate of familiarization submitted as per ANNEXURE-5.
Whether History sheet of tenderer(s) filled in as per Annexure-A1 of E-Tender document.
Whether details of Tools and Plants submitted as per Annexure- B1 of Annexed document.
Whether details of personnel to be engaged in the work submitted as per Annexure-C1 of E-Tender document.
Whether details of work completed during previous three financial years and current year submitted as per Annexure-D1of E-Tender document.
Whether details of works presently on hand submitted as per Annexure-E1 of E-Tender document.
Whether list of court cases submitted as per Annexure-F1of E- Tender document.
Whether list of arbitration cases submitted as per Annexure-G1 of E-Tender document
Whether broad plan of execution of work submitted as per Annexure-J1 of E-Tender document.
Whether details of other credentials/facilities not covered under Annexure-A1 to Annexure-J1 submitted as per Annexure-K1 of E- Tender document.
Partnership deed, if any Constitution of the firm and copies of connected legal documents should be submitted.
Joint Ventures firms cannot participate in this tender.
As per Rly.Bd s Letter No.2013/CE-I/CT/O/25/VOC dtd.05.08.2013 documents in support of financial capacity/capability to be submitted.
NOTE: The above check list is not exhaustive. The Tenderer must go through carefully the entire booklet and submit the tender complying with all the conditions/provisions/ instructions mentioned therein irrespective of the fact that they have been highlighted in the check list or not.
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm, Annexure-V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. (Non-submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer.)
Please submit the required information for evaluation of Bid Capacity as per Annexure-4 of the E-Tender document.
The tenderer(s) are required to upload the information as per Annexure-3 of E-Tender document duly signed by the tenderer(s) and verified by Chartered Accountant since the information is required to evaluate the bid capacity of the tenderers(s) for the tender valuing more than Rs. 10 crore. However, the tenderer(s) may submit any additional information, if any desire so. In case the tenderer(s) failed to submit the minimum required information as per Annexure-3 along with the offer or submit in any other format omitting required information essential to workout bid capacity, his/their offer shall be rejected summarily. This information is to be based on Annexure-4 of E- Tender document.
"Any bidder from a country which shares a land border with India will be eligible to bid in any procurement whether of goods, services (including consultancy services and non-consultancy service) or works (including turnkey projects) only if the bidder is registered with the Competent Authority." For details please refer to Railway Board's letter no.2020/CEI/CT/2/GCC/Correspondence Dt.11.08.2020. Any bidder from a country which shares a land border with India should submit ANNEXURE-6 and Registered Certificate from Competent Authority. For any bidder from India should submit only ANNEXURE-6.
The tenderer whether sole proprietor/a company or a partnership firm/registered society/registered trust/HUF/LLP etc. if they want to act through agent or individual partner(s), should submit along with the tender, a copy of Power of Attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed/Memorandum of Understanding/Article of Association/Board resolution, failing which tender shall be summarily rejected.
Please submit your bank details i.e. Name of Bank along with Bank Branch Code, Accounts Number as appearing in the cheque book, IFSC Code and PAN Number, duly certified by the authorised official of the bank, to facilitate payment through E C S / N E F T / RT G S . In lieu of the bank certificate photocopy/scanned copy of a cancelled cheque may be attached for verification of the above particulars.
Please give full details of the constitution of the Firm/JV/Company/Society etc and also submit relevant documents like Power of Attorney, Partnership Deed,Memorandum of Association, Article of Association, Bye Laws, Board of resolution etc., by uploading and submitting originals in accordance with Annexure-A1 of the ETender Document i.e as per G C C with all amendment in support of (a)Sole proprietorship firm (b) HUF (c)Partnership Firm (d) Joint Venture(JV) (e) Company registered under Companies act 2013 (f) LLP (Limited Libility Partnership) (g) Registered Society & Registered Trust etc . Non-submission of these documents shall render the offer liable to be rejected.
Please submit required details as required from Annexure A1 to G1, J1, V, V(A) to C and 5 to 6 duly filled in and signed. Supportive documents/separate sheet are to be submitted, if required.
If working through contract labour, the Contractor must register with Labour Commissioner. Copy of Necessary license to the submitted with tender or to be produced before signing of Contract Agreement.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Provision for upgradation and Reliability improvement by Replacement of MLB to ELB at 20 no LC gate ( LC Gate No.212,219,233,244,247,263,264,270,274,292,302,303,311,321,324,329,345,372,373 and KP-38 ) in KUR Division.
ST-OT-MLB-ELB-KUR-594~ECOR
ST-OT-MLB-ELB-KUR-594
Open
Works - General
8 Months
Unknown (Unspecified Location)
5 Nov 2026
5 Nov 2026
13 Nov 2026
29 items across 2 schedules · ₹1,43,28,890 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Transportation, Installation, wiring, testing and commissioning of Electrically operated lifting barrier type LC gates in all respect, which includes Installation, wiring & commissioning of Control Panel, if required. Only LC Gate assembly complete with standard fittings will be given by Railway. All materials required for commissioning will be supplied by contractor. Installation to be done by OEM. | Numbers | 20.00 | 80,505 | 16,10,100 |
| 2 | Fixing of relay bases and wiring, bunching, fixing of relays, wiring in Old relay racks/location box and also carrying out any alteration in existing relay rack duly wiring and connecting New to old and Old to old relays by standard wires (RDSO Approved Sources) as per Circuit diagram. Fuses of bases, condensers, ND fuses, LED indicator & its wiring for relay rack. All materials required for this work will be supplied by the contractor from RDSO Approved Sources. Relays with accessories will be supplied by the Railway. | Per Relay | 100.00 | 783 | 78,300 |
| 3 | Alteration of wiring in existing Relay rack/ CT rack/composite relay rack. This includes supply of all types of wires, eyelets, nuts & bolts, bunching material, ferrules, ARA terminals, fuses & fuse blocks by the contractor at his own cost. Lettering & painting to be done by the contractor at his own cost. Wire (RDSO Approved Sources) to be inspected by the representative of Railway before use. | Numbers | 40.00 | 28,281 | 11,31,240 |
| 4 | Excavation of trenches of following depth and width 0.3 Meter detailed below including clearing of roots and trees etc. for all types of soil. This work also includes covering of cables laid in trench and backfilling, ramming, consolidation of soil as well as disposal of extra soil after cable is laid as specified in Guidelines on Signalling Cable laying given by RDSO and any latest circular issued by CSTE/ECoR/BBS. Note: Before refilling of the trenches, the cable laid are to be tested and recorded for its insulation value and after satisfaction of site Engineer the refilling process should start and after monsoon the route is to be attended for backfilling the rain cuts, wash out of soils where ever found. [ii] 1.0 Meter | Kilometre | 16.00 | 88,821 | 14,21,136 |
| 5 | Excavation of trenches of following depth and width 0.3 Meter detailed below including clearing of roots and trees etc. for all types of soil. This work also includes covering of cables laid in trench and backfilling, ramming, consolidation of soil as well as disposal of extra soil after cable is laid as specified in Guidelines on Signalling Cable laying given by RDSO and any latest circular issued by CSTE/ECoR/BBS. Note: Before refilling of the trenches, the cable laid are to be tested and recorded for its insulation value and after satisfaction of site Engineer the refilling process should start and after monsoon the route is to be attended for backfilling the rain cuts, wash out of soils where ever found. [ii] 0.8 Meter | Kilometre | 16.00 | 71,060 | 11,36,960 |
| 6 | Excavation of trenches in all kinds of soils including soft rocky area and clearing of track etc. to a depth of 1.0 M and width of 0.3 M for track crossing /pucca road/level crossing gate/platform/station circulating area or any other place as advised by site Engineer including transportation and laying of DWC/RCC/Split RCC/G.I. pipes with or without coupler. This includes repairing of track/pucca road/level crossing gate/ platform/station circulating area surface to original position by ramming and concreting wherever required soon after the work is over. DWC/RCC/GI pipes shall be supplied by the Railway. DWC pipes wherever required shall be supplied in 6 Mtr. length and shall be cut to size as per requirement. All other materials including cement are to be supplied by the contractor. | Metre | 1000.00 | 335 | 3,35,000 |
| 7 | Excavation of trenches including clearing of roots of trees etc., in rocky area up to a depth to be indicated by Railway Engineer at site as per the site condition [Minimum 0.6 meter] and width 0.3 Mts. at the bottom. This includes concreting & plastering as per the instructions of site Engineer and complete back filling by digging earth from a lead of 30 Mtr. In case 0.8-meter depth or higher is achieved no concreting is required, otherwise concreting up to 100 mm thickness should be done. All materials required for the above works shall be supplied by the Contractor. | Metre | 2000.00 | 255 | 5,10,000 |
| 8 | Cutting of masonary floor/walls at station building/ signal goomty/ Gate lodge at a depth of 0.5 mtr. to 1.0 mtr at places to be indicated by site Engineer for entering of cables inside the building. Only G.I pipes supplied by Railway and all materials as clamps, bolts & nuts as instructed by site Engineer supplied by tenderer. This includes repairing of masonary floors/walls after the cables are taken inside. Cement, Sand required for the work shall be supplied by the tenderer and also transportation of G.I Pipe from Store by the tenderer. | Numbers | 60.00 | 6,108 | 3,66,480 |
| 9 | Trenching and fixing of G.I. pipes of different sizes/DWC pipes in hard rocky area up to a depth of 0.3 M to 0.6 M or at places as per instruction of site Engineer and concreting [1 : 3 : 6] up to height of 100 mm above the pipes. G.I. pipes with the socket/ DWC pipes shall be supplied by the Railway. All other materials required for the works shall be supplied by the contractor. Note: [1] In case of girder bridges, G.I. pipes shall be suitably clamped by the contractor as advised by the site Engineer. Clamps shall be supplied by the contractor. [2] The work including excavation of trenches in hard rock area up to a depth of 0.3 M to 0.6 M and back filling, ramming after completion of work where ever required. [3] In case of concrete bridges clearing of ballast for laying of pipes and re arranging the Railway ballast after completion of work shall be done by the contractor. | Metre | 300.00 | 533 | 1,59,900 |
| 10 | Transportation of signal posts for multiple aspect colour light signals, complete with signal units, bases, ladders and other fittings, excavation of pit, casting of cement concrete foundation, plastering as per Drg. No. Con/SK/T/12, erection and fixing of complete fittings of the 2/3/4 aspect signal/signal posts including termination of cables, wiring, LED fixing, signal testing and focusing. Name plate & marker and all other materials shall be provided by the contractor at his own cost. Required cement shall be supplied by the contractor. Arrangement of Screening to be provided by the contractor if required as instructed by site Engineer. Contractor shall prepare jointly with Railway Engineer at site and submit Signal Sighting report and Signal test report as per approved format of Railway. NOTE: (i) 50 % Payment shall be released after erection of signal post. Balance 50 % shall be released after termination of cable, wiring, painting, testing & focusing of signal. (ii) If foundation is available at site 30% of the cost is to be deducted. | Numbers | 16.00 | 20,931 | 3,34,896 |
| 11 | Laying of Signalling/4 Quad/ 6 Quad/ Power Cable/Telecom cables/ Jelly filled cables of all sizes in excavated trench, through GI/RCC/DWC pipes etc. wherever required. This includes transportation of cables from the stores to work site and transportation of empty cable drums with left over cables from site to the stores at. The length of cable laid includes the length of cable coil for termination purpose. NOTE: The cables are to be carefully handled during loading, un- loading and transportation to work site. Any damage found in the cable after final testing, in view of mishandling of cables, shall be made good by the Tenderer. Cable should be maggered before and after laying and recorded in a register and submitted to the site Engineer. | Kilometre | 92.00 | 24,389 | 22,43,788 |
| 12 | Alteration of wiring in existing apparatus cases full/half. This includes supply of all materials in connection with alteration in wiring. All the materials shall be supplied by the contractor at his own cost. This includes entry of cables, sand filling and masonry work involved. Lettering and painting to be done by the contractor at his own cost. Railway shall supply only relays and relay bases. | Numbers | 40.00 | 3,583 | 1,43,320 |
| 13 | Transportation, excavation of pit, casting of foundation, plastering and erection of Steel Apparatus case (full size) with fixing of E-Type lock, wiring, cable entry, termination clamping, filling cable pit with sand, painting and lettering etc., as per Drg. No. S&T/CON/SK/16. This includes earth work and/or masonry work required for securing the apparatus case as per site condition. Railway will supply apparatus case with 'E' type lock only from Railway stores at. Tenderer will supply all wiring materials, PBT Terminals, fuses, fuse blocks, bus bars, hylum sheet ISI mark [6mm thickness], wood plank board of good quality [minimum 3/4" thick, Cement and transport all the materials to site of work at his own cost. The wiring materials such as wire coils, PBT terminals, fuses, fuse block, etc. should be used from RDSO approved sources. 1) Modification of inside arrangement of Apparatus cases if required for fixing of relays/transformers etc. shall be done by the contractor. Extra shelf, if any, shall be deposited to the Railway stores by the contractor.2) All cables shall be terminated by providing copper eyelet of suitable size. Note:- (i) If location box foundation is available at site 20% of the cost is to be deducted. (ii) 40% payment shall be released after erection of location boxes. | Numbers | 20.00 | 19,438 | 3,88,760 |
| 14 | Supply, Transportation and Installation of earth electrode (make TATA or Jindal as per Rly. practice) including MS flat for signalling equipment on lever frame, apparatus cases, signal, relay racks, cable termination rack, block instrument etc. (supply & installation of earth electrode as per drawing no. RE/S&T/DRG/Tender/SK/398/94 for apparatus cases, signal post & other equipment as per instruction on earthing of S&T equipment. Laying of earth lead mild steel flat of size 35mmx6mm and fixing of lead MS flat (make TATA/Jindal or Similar) to earth electrode and lever frame, signal post & apparatus cases as per Drg. No. CORE/S&T/ALD/SK/591/2008, 592/2008 and 593/2008 respectively and instructions on earthing at S&T equipment and providing cement enclosure for earth electrode as per drawing no. RE/S&T/Sig./Tender/SK/13/85 Alt. A) NOTE: This includes testing of earth value and indicating the same on the Earth enclosure by paint. Inspection by TPI (Third Party Inspection). | Numbers | 120.00 | 12,306 | 14,76,720 |
| 15 | Transportation, installation, wiring, testing and commissioning of RKT on 20 mm pre- laminated, BWP, termite proof, borer proof plywood (or on a 12 mm Hylum sheet ISI Mark) of size 300 mm X 400 mm X 12 mm per RKT, including termination of cable/indoor wire, LED, push buttons etc. Railway will supply only RKT. Tenderer will supply all other required materials for the work. Inspection of plywood/Hylum sheets by Representative of Railway before use. | Numbers | 60.00 | 3,570 | 2,14,200 |
| 16 | Dismantling of existing LC gates and related gears. This includes dismantling, stacking, accountal of all the materials including transportation of all the released materials to the Railway store. | Numbers | 20.00 | 10,461 | 2,09,220 |
| 17 | Transportation and fixing of perforated GI pipes of 100 mm Dia on bridges, culverts, drains or in trenches or any other place as per instruction of site Engineer with clamps at 1.5 mts. interval on steel girder bridges or at places advised by site Engineer. This includes supplying of G.I. Pipes, 80/100/150 mm dia. Specn. No. IS:1239/2004, or latest medium gauge with threaded collars (Make -TATA /JINDAL) by tenderer. This also includes 100 mm thick concreting on GI pipes as required and instructed by site Engineer and all other materials required for the work shall be supplied by the tenderer. Note: The G.I. pipe shall be perforated by drilling 7 mm dia holes length wise in zig-zag manner staggered at a distance of 300 mm. G.I. Pipes before and after perforation and bridge fixtures supplied by the tenderer will be inspected by representative of Railway before use. The bridge fixtures will be supplied by tenderer for fixing of GI pipes on girder bridges only. | Metre | 600.00 | 2,653 | 15,91,800 |
| 18 | Excavation of pit to required size as directed by Engineer in charge at site and casting foundations in the ratio of 1:3:6 cement, sand and metal (40mm stone) all to be supplied by contractor approx. 10 Nos. per each sliding gate or as directed by Engineer in charge at site. | Numbers | 10.00 | 49,789 | 4,97,890 |
| 19 | Transportation, Installation and testing of Sliding Boom. Sliding boom and E-Type lock will be supplied by Railways. | Numbers | 10.00 | 47,918 | 4,79,180 |
| Schedule total | ₹1,43,28,890 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC2022..pdf
ATTACHMENT
LISTOFANNEXURES.pdf
ATTACHMENT
TENDERFORMSTHIRDSHEET..pdf
ATTACHMENT
TENDERFORMSSECONDSHEET..pdf
ATTACHMENT
TENDERFORMSFIRSTSHEET..pdf
ATTACHMENT
LISTOFLC.GATES.pdf
ATTACHMENT
ELB_1.pdf
ATTACHMENT
SCOPEOFWORK.pdf
ATTACHMENT
SPECIALCONDITIONOFCONTRACT._1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .