Constr of FOL issue covered shed and certain minor works at New and Old Mil Stn Kapurthala under GE Kapurthala.

Amount

Surface excavation in soft /loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed by Engr-in-Charge.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out , returning filling in layers not exceeding 25cm including watering and ramming and removing surplus earth to a distance not exceeding 50 metre complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out complete all as specified and directed by Engr-in-Charge.

M&L for plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and directed by Engr-in-Charge.

M&L for plain cement concrete (1:5:10) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete and as in sub base of floors complete all as specified and directed by Engr-in-Charge.

S & F steel work in tubular trusses, rafters and posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 (grade st-240) complete all as specified and directed by Engr-in-Charge.

S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality B complete all as specified and directed by Engr-in-Charge.

M & L for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L Brick work with sub class 'B' burnt clay bricks (old size bricks) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M & L rendering 15mm thick on fair faces or other than fair faces of brick work in CM 1:4 finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for two coats of cement base paint, white or tinted on walls / vertical surfaces incl. Preparing of new ( plastered or unplastered ) surfaces with chalk whiting priming complete all as specified and directed by Engr-in-Charge.

M & L for preparation of new or previously untreated steel surfaces of any description , over 10 cm width or girth not otherwise described for and priming with red oxide and applying two coat of synthetic enamel paint over priming coat complete all as specified and directed by Engr-in-Charge.

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658 - 2006 of 60mm thick ness, M-35 grade with grey cement and pigment over sand cushioning complete all as specified and directed by Engr-in-Charge.

M&L for 25mm Fine sand filling under floor or in foundations in layers including watering and consolidation complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed by Engr-in-Charge.

Removing excavated material to a distance exc. 250 m but not exc 500 m and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and directed by Engr-in-Charge.

Dismantling asbestos cement sheet in roof covering complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced cement concrete (design Mix) M-25 (20mm graded aggregate) as in slabs complete all as specified and directed by Engr-in-Charge.

M & L Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed by Engr-in-Charge.

M&L 100mm thick PCC 1:4:8 (40mm graded aggregate) type B-2 as in subbase complete all as specified and directed by Engr-in-Charge.

M&L 40mm thick PCC 1:2:4 (20mm graded aggregate) type B-1 as in subbase for receiving floor tiles complete all as specified and directed by Engr-in-Charge.

M&L 75mm thick PCC 1:3:6 (20mm graded aggregate) type C2 as in plinth protection finishing the surface even and smooth with out using extra cement complete all as specified and directed by Engr-in-Charge.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying three coats of whitewash complete all as specified and directed by Engr-in-Charge.

M & L RCC 1 : 2 : 4, Type B-1 using 20 mm graded stone aggregate as in beams, lintels complete all as specified and directed by Engr-in-Charge.

S&F Mild steel TMT bars 6mm to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns,hooking ends and binding with and including mild steel wire (annealaed) not less than 0.9mm dia or securing with clips quality conforming to Fe-310-0 or Fe-410-0 all as specified and directed incl drilling to cement conc surface for fixing of reinforcement in position complete all as specified and directed by Engr-in-Charge.

Ditto as above item but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed by Engr-in-Charge.

S&F factory made solid Panel PVC moulded door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings complete all as specified and directed by Engr-in-Charge.

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 150mm complete all as specified and directed by Engr-in-Charge.

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified and directed by Engr-in-Charge.

Supply and fix steel ventilators fixed type with glazing bars etc complete all as specified and directed by Engr-in-Charge.

S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed by Engr-in-Charge.

S&F in repairs for stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws with bolts incl leaping wooden complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engr-in-Charge.

S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore CP bib taps cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

Supply and fix for vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat back closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, jet spray necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity make white in colour and PVC flush pipe 32mm dia complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs of vitreous china bowl urinals flat back, half stall complete including providing & fixing plugs, bedding urinal against wall in CM (1:2) securing urinal to plugs with & including 60cm long brass screws, jointing around urinal back in cement paste including flush pipe, grating and union for discharge pipe complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges, complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surface 450 x350 x 7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10 mm thick cement screed bed (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge.

M&L for 20mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid complete all as specified and directed by Engr-in-Charge.

M&L for 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid complete all as specified and directed by Engr-in-Charge.

M&L for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches and fixed in floors complete all as specified and directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) bend complete all as specified and directed by Engr-in-Charge.

S&F 75 PVC (SWR) junction single,(single T) equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F 110 mm PVC (SWR) bend with complete all as specified and directed by Engr-in-Charge.

S&F 110 PVC (SWR) junction single,(single T) equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polythelene water storage tanks 500ltrs capacity with threaded lid white colour hoisted and fixed in postion incl fittings complete all as specified and directed by Engr-in-Charge.

S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 25mm fixed in repairs complete all as specified and directed by Engr-in-Charge.

S& F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed by Engr-in-Charge.

M&L for NP-2 200mm dia pipes laid in trenches and jointed complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:3:6 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200 mm dia SWG pipe complete all as specified and directed by Engr-in-Charge.

RCC NP3 200 mm diameter Pipes laid on 150 mm thick PCC 1:4:8 bed with depth of excavation 0.70m-1.65m in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional complete all as specified and directed by Engr-in-Charge.

Soakage well excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.0m dia X 6.0m effective depth complete all as specified and directed by Engr-in-Charge.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :- Make of Cable 1.5 sqmm:- Havells/ RR Cable/ V-Guard

(a) One light point controlled by one, one way switch

(b) One fan point controlled by one, one way switch

(c) One socket outlet 3 Pin, 5 Amp on independent board

M&L for point wiring with 4.00 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 4 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board. Make of Cable 4.0 sqmm:- Havells/ RR Cable/ V-Guard

S&F switch piano flush type single pole one way 6 Amp (ISI Marked) Make - Havells/ Schnider/ Legrand

S&F switch piano flush type single pole one way 15 Amp (ISI Marked) Make - Havells/ Schnider/ Legrand

S&F socket out let 2 in 1, 3 pin 5 Amp flush type (ISI Marked) Make - Havells/ Schnider/ Legrand

S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) Make - Havells/ Schnider/ Legrand

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) Make - Havells/ Schnider/ Legrand

Supply, installation, testing and commissioning Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make: Crompton/ Bajaj/ Philips

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 12W after taking down old one complete all as specified and as directed by engr-in charge.Make - Havells/ Schnider/ Legrand

M&L for sub main wiring after taking down old sub maim wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Two run of 6.00 Sqmm cable one run of 4.00 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit.) Make :- Havells/ RR Cable/ V-Guard

Supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as directed by Engineer-in-Charge.

S & F of MCB, 10 to 32 Amp, SP, 240 Volt Make - Legrand/Schneider-Acti 9/Siemens-Betagard

S&F of MCB, 40 Amp, SPN, 240 Volt Make - Legrand/Schneider-Acti 9/Siemens-Betagard

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers cutting of the holes in existing wall and making good the surfaces all as directed .

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 16 Sqmm 2 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation of poles/ stays/ laying of cables etc and getting out including trimming of sides of trenches complete all as specified and directed.

Returning, filling the soft / loose soil including spreading, leveling watering and well ramming in layers not exceeding 25 cms thick each layer complete all as specified and directed.

Removing of surplus excavated soil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed.

Material and labour for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and directed.

Supply and fix wall mounted fan PVC body AC single phase 230V of size 400mm sweep with three blades complete all as specified and directed by Engr in Charge Make : Havells/Usha/Crompto

COSMO BUILDERS