Maintenance work

Amount

Renewing the damaged worn out vinyl flooring and refixing the new Vinyl flooring using Best quality vinyl flooring sheet of 2mm thick including fixing in position with SR pate etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing of partly glazed and partly panelled pre laminated partical board made with following provisions Partition : Partition tile based system (75mmthickx1200mm ht) made of Aluminium extrusions duly powder coated with 40 to 60 microns of required colour choice. The frame is fixed with tiles to the Choice of Pre laminated particle Board in the bottom and Glass panel of 5.50mm thick for bottom panel. Skirting will be provided at the bottom of the partition that can be used to run the cables to a thickness of 100mm. The system is developed to run the cables (power & data) from the bottom to the table top level (universal cabling system) Necessary provision will be given to fix table top with the partition along with vertical supports wherever required as directed by the departmental officers. (The colour and quality of panels should be approved by the departmental officers before execution of work)

Renewing the damaged door shutter and refixing new with partly glazed and partly panelled pre laminated particle board door shutter with frame made with following provisions. outer frame will be made with aluminium powder coated box section of size 2 ½”x2” and door shutter frame will be made with aluminium powder coated box section of size 4 1/2”x1 ½” the bottom portion of the door shutter will be covered with Pre laminated particle Board and Glass panel of 4.00 mm thick for top panel on both side. The glass portion shall be itched to avoid clear visibility in the room. Stainless steel butt hinges 3-Nos are fixed to run the door on the frame, Ball lock system of godrej make will be fixed on the middle portion of the door frame to provide proper security arrangements of the necessary door stopper is also provided bottom of the door shutter. The cost of the door shutter with frame will be inclusive of cost of material, labour charges for fixing in position, power consumption charges and other incidental charges etc., complete (The colour and quality of panels should be approved by the departmental officers before execution of work)

Modular Workstation Linear 3 Seater with 75mm thick aluminium partition with 9mm tile and marker board. Tops of size 1200 X 600 and legs made out of 25mm and 18mm thick Prelam Particle Board, all exposed edges are Machine pressed Edgebanding finish. mobile pedestals of size 400mm W x 450mm D x 630mm H completely made of 18mm Prelam Particle Board with 2mm thick PVC machine pressed edge banding.With Keyboard Tray. The rate includes labour for manufacturing, supply, transportation, etc.,

CONFERENCE HALL CHAIR seat and back made of moulded cushion with metal frame support . Frame "R" type with powder coated finish along with half pu arms etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing of special type UPVC arch in Aluminium arch outer frame of size 68.5mmx35mm in 4mm thick, beeding of size 12mm and 1.5mm x 1mmm L angle 2.5mm thickness,screw PTA Zinck coated and 5mm saint Gobiant should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.

Dismantling the existing aluminium Partitions, doors and windows shutters from its position with new rubber beading, L angel, Screws and replacement of damaged glass panes with necessary rubber beading, stays, hinges and other materials if necessary including cost of materials, labour charges and dismantling brick or RCC and redoing the same to its orginal condition etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Collecting the scattered debries from the campus and conveying away the same to ouside by tipper machinary to a lead of 3km (Entirely within city limit including loading and unloading charges and dumping in low places and levelling neatly etc., complete complying with standard specification and as directed by the departmental officers.

GST at 18%

S.P Muthu Constructions (BID ID -1224541)