Renovation works of existing Assam Type building at District Commissioner Office premises of Kamrup Metropolitan District for accommodation of New Guwahati Co-District Office at Hengrabari, Guwahati (Civil and Electrical works).

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 1 For thickness of tiles 10 mm to 25 mm

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With F.P.S.(non modular) bricks

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge.

Providing and fixing to existing door frames. 9.118.1 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). sqm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion, Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing bright finished brass handles with screws etc. complete: 125mm

Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-incharge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately)

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board, 510x1040 mm bowl depth 250 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm nominal dia Pipes

Providing fitting, fixing PVC panels for wall and ceiling (Plain) with mterials installation including labour , carriage etc. as directed and specified.

Supplying fitting fixing of wall paper of reputed make over finished wall after cleaning the surface etc. complete as directed.

Providing and fiing wall panelling interior partition walls, colmn. Chowkath etc. as directed and specified by the Deptt.

Supplying ,fitting and fixing Johnson Zebra Roller Blinds Combi Blackout) make and shade, design as per choice complete as specified and directed by the Deptt. At all levels

Excavated and cleaning of deposited silt/ clay/floating debris/organic waster/vegetation etc. by removing the slab/ manhole vocer and retitting the same os directed by the Deptt.

Hiring truck for Carrying from Dispur to G.M.C. Dumping ground at Boragoan with 2 Nos. of ordinary Labour

Supplying and fitting 4.5 Kg. Capacity CO2 type Fire Extinguisher with labour as directed by the Deptt. Fpr Ministers Colony quarter Dispur, Guwahati-6

Providing labour for shifting of existing furnitures from the Assam Type building to District Commissioner (Kamrup-M) office as directed by the Deptt.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A, 16 KA,TPMCCB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole

Supply, installation Testingand Commissioning of 1200mm sweep BEE 5 star rated, ceiling fan with Brush Less Direct ccurrent (BLDC) Motor class of insulation B 3 nos. blade ,30cm long down rod, 2 nos. canopies shackle kit safety rope copper winding, Power Factor not less than 0.9 service value (CMM/W) minimum 6.85, Air deliveery minimum 215CMM, 350RPM (Tolerance as per IS 374-2010 THD less than 10% remote or electronic.regulator unit ofr speed contron and all remaining accessories incluidng safety in, nut,bolts washers, temperature rose =75 degree C (max) insulation resistance more that 2 mega ohm, suitale for 230 v, 50Hz single phase AC supply earting etc. complete as required.

Supplying with installation testing and commissioning of Hi-wall 3 Star rating not ducted split type air conditioner of the following capacity with cordless remot compleete with copper pipe and electrical connection cable as approved by the Deptt. Up to 5m between the room unit and outdoor unit as directed by the Deptt. 1.5 Ton (Voltas/Carrier/Blustar/Daikin make )

Supplying installation,testing and commission of the following indoor Decorative Recess mounted LED down lighter luminaries of 14W Led recessed Luminaire Phillips complete with all accessories such as ballastm starter etc, in the false ceiling type Armstrong /Gypsum or similar ceilingt mounting with necessary suppoort with 1.5 sq.mm PVC insulated S.C. copper conductor as required and as directed by the Deptt. (Phillips/Jaquar/LT/Wipro make) 14 Recessed LED Down Light

Supplying installation testing and commissioning of Exhest fan 225 mm air flow as required 1.5 sq.mm copper multistand wire connection an as specified and directed by the Deptt. Orient/Usha/Crompton make.

Supply of 65" Intelligent Flat Panel Display Brightness (typical) 450 cd/m², Resolution 3840 x 2160, Response Time (typical) 8 ms, Viewing Angle 178 x 178, Surface Hardness Toughened Glass with Level 7 of MOHS Standard, Panel Technology IPS, Operating System Android 13, CPU Quad core processor and with 1.9Ghz (A55×4), Memory 4 GB, Storage 32 GB, WiFi and Bluetooth Wifi 802.11ac/b/g/n/a/axBT 5.2, Type of Touch Technology 40 touch points, Accuracy ±1.5mm, Interactive White Board Software Support in Androide and Windows*, Features Writing, Pen, Palm Eraser, Save, Screen Capture, Storage and Tool Bar. Supports 3rd party applications, recording feature, USB WEB Cam Compatible, Support PPT, Word,PDF, Image, Video Pla, Product Dimensions (WxHxD) 1488.4×896.6×87.2mm ). (Make Panasonic/ LG/ Viewsonic)

Supply of OPS PC, i5 Processor Includes Windows 11 Pro Operating System, 6GB RAM, 128 GB ROM

Supply of Captivate USB / Bluetooth Speakerphone USB, Bluetooth®, and analog audio connectivity 360-degree coverage captures voices in up to a 16 foot (5 meter) radius 6-element microphone array focuses audio pickup and suppresses background noises Sophisticated acoustic echo cancellation and noise reduction ( Make Atlona/Purelink / Lightware)

Supply of Captivate™ 4K ePTZ Auto-Framing Camera USB-C®interface for video and audio, as well as device powering Automatically detects and re-frames camera for up to 6 participants 4x digital zoom and 110° wide horizontal field of view Fast, responsive ePTZ (electronic pan, tilt, and zoom) camera functions 2-microphone array with 5 meter (16 foot) audio pickup range ( Make Atlona/Purelink / Peoplelink)

Supply of Captivate™ 4K ePTZ Auto-Framing Camera USB-C®interface for video and audio, as well as device powering Automatically detects and re-frames camera for up to 6 participants 4x digital zoom and 110° wide horizontal field of view Fast, responsive ePTZ (electronic pan, tilt, and zoom) camera functions 2-microphone array with 5 meter (16 foot) audio pickup range ( Make Atlona/Purelink / Peoplelink)

Supply of HDMI Cable - 2,00m, HDMI-A male to HDMI-A male , HDMI version 2.0 – 18Gbps for resolutions up to 4K UltraHD 60Hz , High purity, tinned OFC copper conductors and triple shielding, AWG28 , Gold plated precision contacts with PureLink SLS™ (Secure-Lock-System™). ( Make: Aten/Purelink / Atlona )

Supply of Active 4K Premium High Speed HDMI Cable 7,50m, HDMI-A male to HDMI-A male with PureLink APO™ , HDMI version 2.0 – 18Gbps for resolutions up to 4K UltraHD 60Hz , High purity copper conductors and triple shielding, AWG28. ( Make: Aten/Purelink / Atlona )

Supply of USB 3.2 USB-C Cable with E-Marker – 2.00m , USB 3.2 (Gen 2x2) – 20Gbps data transmission , Gold plated precision contacts , USB-C male to USB-C male , High purity copper conductors and triple shielding , E-Marker, USB Power Delivery 100W, DP Alt-Mode up to 8K 30Hz ( Make: Aten/Purelink / Atlona )

Supply of Various Connectors, and Accessories

Installation and Commissioning Charges

2 Meter Moulded Conference Cable

10 Meter Moulded Conference Cable

Supply of Digital SmartMixer®with acoustic echo canceller and web interface, Onboard acoustic echo cancelling (AEC) 12-band parametric EQ SmartMix modes with gain sharing or gating options 4 balanced mic inputs, 2 balanced Mic/Line inputs and 1 stereo unbalanced input 6 1 stereo and 2 mono outputs 2-channel USB audio interface for soft codec (Skype, WebEx) integration or playback from computer Full digital processing on inputs and outputs 8 x 3 audio routing matrix 6-channel Smart Mix (gate or gain sharing) Front panel direct operation and Web Remote functionality IP control for third-party CCS administration Up to 6 mixers can be linked using Cat5e cable. (Make: Audio-technica / Midas / Allen & Heath)

Supply of 4 Channel 300 Watt Power Amplifier with ATR Class D Power Handling : 4 × 65 W @ 4 Ohms, 4 × 45 W @ 8 ohms THD 20Hz-20kHz at 1 W

Supply of Wireless Presentation Platform Wireless AV platform allows simultaneous content sharing for up to four 1080p presenters Wireless screen casting with iOS®, AndroidTM, Mac®, ChromebookTM, and Windows® devices through native AirPlay®, Google CastTM, or MiracastTM protocols Dynamic Layout ModeTM (patent pending) automatically adapts to incoming or disconnected source content Instructor Mode allows a user to manage content, adjust audio volume, upload and play media content, stream YouTubeTM, and switch between layouts Supports YouTube Live streaming Supports cloud-based digital signage platforms Local storage available for playback of images and video ( Make Atlona/Purelink / Lightware)

Supply of Cable Cubby with 1 x HDMI , 1 X USB-C, 2 x LAN and 2 x Power Connections

Supply of 12U AV Equipment Floor mount Rack 600 X 600

Supply of HDMI Cable - 2,00m, HDMI-A male to HDMI-A male , HDMI version 2.0 – 18Gbps for resolutions up to 4K UltraHD 60Hz , High purity, tinned OFC copper conductors and triple shielding, AWG28 , Gold plated precision contacts with PureLink SLS™ (Secure-Lock-System™). ( Make: Cable-Wise/Purelink / Atlona )

Supply of Active Optical HDMI Cable 4K, Connector HDMI Type A, Transmission Bandwidth 18 Gbps, Display Resolution 4K@60hz, HDMI Version HDMI 2.0, Wire Specification Optical Fiber + Copper Cable for Power, Power Consumption 250mW, Operating Temperatures -40°C to 70°C, Other Features eARC|VRR|QFT|ALLM Dynamic HDR, ( Make: Cable-Wise/Purelink / Atlona )

Supply of CAT6 UTP Cable supports Gigabit Ethernet (1000 Base-T) standard. Operates at a bandwidth up to 250 Mhz. This cable well exceeds the requirements of TIA/EIA-568.C.2 Category 6 ISO/IEC Class E, 23 AWG solid copper conductor for superior conductivity, Resistance Unbalance : 5% Max ( Make: Belden / D-Link/ Molex}

Supply of 1.5 MM 2 Core Speaker Cable

Supply of 20/22 AWG Microphone/Signal Cable ( as per actual)

SWITCH CISCO GIGABIT CBS 350 WITH CBS 350-24P-4G

Cisco ISR series 1G Router with Care Pack & Licence

RACK 22 U Standalone Rack with Accessories

CABLE CAT 6 D-LINK

KEYSTONE JACK CAT 6 D-LINK

FACE PLATE SINGLE D-LINK

BACK BOX D-LINK

UPS 5 KVA WITH BATTERY 26 AH 1/2 hr backup

CASSING & CAPING

Cisco Lan SFP

Installation

M/S AK ENTERPRISE (BID ID -255901)