Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.7 LAccepted-AOC | L1 | Accepted-AOC lowest and reasonable | |
| 2 | L2₹28.4 L+₹1.6 L (5.80%)Rejected-Finance | L2 | Rejected-Finance not lowest | |
| 3 | L3₹30.0 L+₹3.2 L (11.8%)Rejected-Finance MAAN SAROVAR 96 SAI NAGAR GODHANI ROAD NAGPUR 440030 | NAGPUR | NAGPUR | MAHARASHTRA | 440030 | L3 | Rejected-Finance not lowest | |
| 4 | L4₹31.5 L+₹4.7 L (17.4%)Rejected-Finance 21 GURUKRIPA PATIL LAYOUT GOPLA NAGAR NAGPUR 440022 | NAGPUR | NAGPUR | MAHARASHTRA | 440022 | L4 | Rejected-Finance not lowest | |
| 5 | L5₹31.9 L+₹5.1 L (18.9%)Rejected-Finance 48 CHANDAK LAYOUT GHAT ROAD NAGPUR | NAGPUR | L5 | Rejected-Finance not lowest |
Tender Value
Refer Docs
EMD Value
₹52,400
Closing Date
13 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF NAGPUR
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
PROVN OF PARKING SHED FOR COMMAND HQ AND HQ MC U, IMPROVEMENT TO CERTAIN OMQs PH IV AND PROVN OF FOUNTAIN AT VSN NAGPUR
2022_MES_522073_2
GE/NAG/22-23/8529/09
Open Tender
Miscellaneous Works
Item Rate
180 days
GE AF NAGPUR
As per NIT
8 documents required · 8 mandatory
₹500
GE AF NAGPUR
₹52,400
12 Oct 2022
14 Jun 2022
20 Aug 2022
14 Jun 2022
13 Aug 2022
22 Jun 2022
60 days
Amount
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in Boring holes of 300mm dia upto 5 m deep in soil for rain water harvesting and getting out in hard/dense soil and disposal of soil to a distance of n exc. 50 m complete all as specified and directed.
Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.
M &L for Excavating in trenches, n exc 1.5 m deep and getting out in hard /dense soil complete all as specified and directed.
M &L for Excavating in trenches, exc 1.5 m deep but n exc 3 m in depth and getting out in hard /dense soil complete all as specified and directed.
M&L for excavating over areas, n exc1.5 m deep and getting out in hard/dense soil complete all as specified and directed.
M&L for excavating over areas, n exc1.5 m deep and getting out in hard rock complete all as specified and directed.
Returning, filling in including spreading levelling, watering and well ramming in layers n.exc 25 cm thick in layers etc complete all as specified and as directed.
Removing excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5M above the starting point complete all as specified and as directed.
Removing excavated soil exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and as directed.
M&L for removing excavated rock exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and as directed.
Removing excavated material to a distance exc 1.50Km but not exc. 5.00Km, inside or outside MD land and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified and as directed.
M&L For Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe-410- W(Gde E-250) B quality including distance pieces, cleats etc. complete all as specified and directed
M&L for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe-410- W(Gde E-250) B quality complete all as specified and directed.
M&L for Mild steel plates (plain or chequred) channel square cut notched ordinary and counter sunk forming holes without any attachment for Fe-410w grade E-250 quality A complete all as specified and directed.
S&F Mild steel Screw bolts exc 12.5mm but not exc 20mm dia purpose made with hexagonal or square head at one end and screwed the other end or screwed both ends to be fitted with washer and one hexagonal or square exc 30 cm long all as specified and directed.
S&F Mild steel Screw bolts (machine made) with hexagonal or square head at one end and screwed the other end exc 5 cm but not exc 10cm long and diameter of neck exc 5 mm but n exc 10mm dia complete all as specified and directed.
M&L for Forming construction joints 30mm deep x 10mm wide filled with sealing compound grade 'B' all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI bassed corrugated steel sheet 0.50 mm thick of an colour having tensile strenth of 550Map as in roof covering/cladding to wall,fixed with self tapping screw all as specified and directed.
M&L for Hardcore of gauge n.exc 63mm deposited ,spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 100 mm thick cement concrete using (40mm graded aggregate) type D-2 (1:4:8) as in sub-base, floor complete all as specified and directed.
Material and labour for Cement concrete type C- 2, 1:3:6 (using 40mm graded aggregate) as in floor finishes complete all as specified and as directed.
M&L for PCC (1:4:8) type D-2(using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L for Brickwork with sub class 'B' Bricks , straight or curved in plan exc 6 m mean radius built in CM(1:4) complete all as specified and directed.
M&L for brickwork with subclass old size ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
M & L for Brickwork with fly ash bricks, straight or curved on plan n exc 6m mean radius, built in CM (1:6) all as specified and as directed
M&L for rendering 15mm thck in CM 1:4 including finishing even and smooth without using extra cement complete all as specified and directed.
M & L for rendering 15 mm thick in CM 1:3 over brick or concrete surfaces, finished fair and even all as specified and as directed.
Supply only integral water proofing compound.
M & L for Preparation of Newly plastered external wall surfaces by applying two coats of cement base paint over a coat of primer complete all as specified and directed
M&L for Reinforced Concrete Cement M-25 Nominal mix (using 20mm graded stone aggregates) as in foundations including rafts, footings, beams, plinth beams, bases for columns etc. basement slabs, under reamed piles and mass concrete complete all as specified and directed.
M & L for RCC type M-25 mix using 20mm graded aggregates as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.
M&L for Reinforced Concrete Cement M-25 Nominal mix as in columns, pillars, piers, posts and struts complete all as specified and as directed.
M&L for mild steel TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking , bending and binding with MS wire (annealed) not less than 0.9 mm dia all as specified and as directed by engineer-in-charge.
M&L for TMT bars 10mm dia and over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per item No 35.00 above here-in-before but 5mm dia and over upto and including 10mm dia in stirrups spacers and binders complete all as specified and directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, plinth beams and similar work with rough finished surfaces of concrete flat complete all as specified and directed.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
M & L for Formwork to soffits of suspended slabs curved in plan such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and as directed.
M&L for formwork for rough finished curved surfaces of concrete to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc.; vertical or to batter complete all as specified and directed
M&L for applying 2 coats of Synthetic Enamel paint over a coat of Red Oxide zinc chrome primer on steel surface over 10 cm girth including preparation of surface complete all as specified and as directed.
M&L For Machine pressed precast concrete interlocking paver block any shape and size or as approved by GE confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment over 50mm sand cushioning complete all as specified and directed.
M&L for mosaic tiles 10-12 mm thick bedded and jointed with white cement complete all as specified and directed.
M&L for granite(of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
M&L for 20mm thick Granite (of any type) tiles machine cut in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engr-in-Charge.
S&F Cast iron soil 100mm dia, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.
S&F cast iron cowl of 100mm bore complete all as specified and directed.
M & L for Loose filling boulder or broken stone with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells all as specified and as directed.
M & L for very coarse sand/pea gravel (100mm thick) Loose filling in soakage pits, soakage wells all as specified and as directed
M & L for coarse sand (300mm thick) of 1.5-2.0mm guage Loose filling in soakage pits, soakage wells all as specified and as directed
M & L for gravel (300mm thick) of 5-10mm guage Loose filling in soakage pits, soakage wells all as specified and as directed
M & L for Slotted UPVC Pipes (SCH-40) of 100mm dia all as specified and as directed.
M & L for Precast RCC 1:2:4 type B1 as in manhole covers including form work etc all as specified and as directed.
Supply and fix GI tubing medium grade 40 mm dia with all fitting inside the fountain including suitable support made of GI Pipe light grade, Flange nut bolt, making bend, wherever required. Note the cost of arrangement for fixing or nozzle given in schedule and make holes for fixing of nozzles and welding of pipe and fixing in ground support of pcc and making circular, Hose nipple 40 mm dia, socket for nozzle on pipe and bending of pipe is deemed to be included in the unit rate of item complete all as specified and directed
Supply & lay tubes, ‘medium grade’, 25 mm dia galvanized, with all fitting; laid in trenches complete all as specified and directed
Supply and fix brass nozzle of size ¼ dia suitable for fountain complete all as specified and directed
Supply and fix multi injector flower type nozzle having minimum 20 small nozzles and one stream nozzle brass nozzle of size25 mm dia suitable for fountain complete all as specified and directed
Supply and fix LED light 15 watts and RGB ( multicolor) water proof luminaries ip 65 protection with of high output of LED’s housed in complete enclosure of stainless steel body toughened glass with elastomeric seal special plastic cable gland compact socket head fasteners and mounting bracket are all of stainless steel provided for aiming the object complete all as specified and directed
Supply, lay and fix flexible Flat cable 1.5sqmm 3 core PVC insulated and sheathed submersible type with stranded copper conductor (for Light) complete all as specified and directed
Supply and install submersible pump starter (open well horizontal type), submersible pump set starter 3 ph 415 volt 7.5 HP RPM 33-43 m head discharge 540-240 LPM suitable for water fountain complete all as specified and directed. Make: CG, Kirloaker, CRI, Grundfos, ksmb.
Supply and fix MCB TP 32 Amps capacity having breaking capacity 10 KA ‘C’ curve complete all as specified and directed. Make Legrand/Schneider/Siemens/C&S.
Supply and fix MCB TP 25 Amps capacity having breaking capacity 10 KA ‘C’ curve complete all as specified and directed. Make Legrand/Schneider/Siemens/C&S.
Supply and fix MCB SP 6-32Amps capacity having breaking capacity 10 KA ‘C’ curve complete all as specified and directed. Make Legrand/Schneider/Siemens/C&S.
Supply and fix garden irrigation green hose pipe PVC material with fiber reinforced 40 mm bore including suitable metal clamps with nut and bolts complete all as specified and directed
Supply and fix garden irrigation green hose pipe PVC material with fiber reinforce 50 mm bore including suitable metal clamps with nut and bolts complete all as specified and directed
Supply and fix garden irrigation green hose pipe PVC material with fiber reinforced 25 mm bore including suitable metal clamps with nut and bolts complete all as specified and directed
Supply and fix gun metal gate valves with iron wheel head screwed both end for iron pipe size 50 mm all as specified and directed by Engr-in-charge. Make: Zoloto, Leader, GEM.
Supply and fix gun metal gate valves with iron wheel head screwed both end for iron pipe size 40 mm all as specified and directed by Engr-in-charge. Make: Zoloto, Leader, GEM.
Supply and fix Gun-metal, globe or gate valves 25 mm dia with iron wheel head, screwed both ends for iron pipe and supply fixed new one all as specified and as directed. Make: Zoloto, Leader, GEM.
M&L for PCC 1:3:6 with 20 mm aggregate for making foundation for placing of rotational moulded polyethylene water storage tanks of capacity 500 Ltrs all as specified and as directed by EIC.
Supply and install horizontal submersible pump set 5 HP, 20-30 mtr head 860-400 lpm discharge suitable for water fountain all as specified and directed Make: Crompton Cat Part No SHONM5AQC134 or equivalent
NEELKAMAL BUILDERS
M/s Prakash R. Verma
Asha Enterprises
dhanshree enterprises
Vishwakarma Engineering Works
Raut Construction
Varsha G Nagphase
VIJ ASSOCIATES
M/s Ashwin Bhange
M/s S. S. MUNDE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .