PROVN OF 08 X SACTIONED WORKS AT AFSSR UNDER GE (AF) GURGAON

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface

M&L for PCC (1:4:8) type D-2(using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in beching and coping, bed block lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F circular/rectangular pipe for posts or struts in fencing including cutting tops to shape as directed ,drilling holes, notching for wire etc flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F for mild steel work of angles and omega clamps as in posts or struts in fencing including cutting tops to shape as directed ,drilling holes, notching for wire etc flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe 410-W(Gde E-250) quality-B) complete all as specified and directed.

Supply only powder coated (green) anticut & anticlimb mild steel galvanized welded wire mesh fence of size 76.2mmx12.7mm and 4 mm dia fixed and binding with nut bolt or GI wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining fixing to any type of strandard rail straining bolts,including securing or tying at crossing with provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed.

S&F concertina coil with punched tape 600 mm openable dia and 10.00 mtr openable length having 50 number of turns for every 6.00 m length, spring core wire (2.5 mm thick) of tensile strength of 165kg/sqmm with tape (0.52 mm thick) and weight 43.478 gm/mtr including fixing the same to Y-shaped angle iron with 06 horizontal reinforced barbed tape wire, stud tied with GI staple and GI Clips to retain horizontal complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new steel surfaces of any description over a coat of red oxide primer including preparation of steel surface complete all as specified and directed.

Excavation over areas in any type of soil, n exc 1.5 m deep and getting out

Ditto as per Sl.item no. 12 but exc 1.50 m deep but n exc 3 m deep

Ditto as per Sl.item no. 12 but exc 3 m deep but n exc 4.5 m deep

Ditto as per Sl.item no. 12 but exc 4.5 m deep but n exc 6.0 m deep

Ditto as per Sl.item no. 12 but exc 6 m deep but n exc 7.5 m deep

Excavation in trenches n. exc 1.5m wide and n. exc 1.5m deep and getting out in soft/loose soil.

M&L Plain Cement Concrete Type D2 1:2:4 (using 40 mm graded stone aggregates) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks in one brick thick honey comb work, built in cement mortar 1:4 complete all as specified.

M & L for Loose filling with brick bats broken of gauge 40 to 80 mm soakage pits, soakage wells complete all as specified.

M&L for precast reinforced cement concrete 1:2:4 type B-1 with using 20 mm graded crushed stone aggregates as in cover slabs (for manholes etc),for soakage well or septic tank cover slab, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plan faces set in cement mortar (1:4) including necessary use and waste form work etc complete all as specified and as directed Note - Reinforcement shall be measured and paid separetly

M&L for TMT bars upto 10mm dia as in reinforcement for concrete, cut to length, bent to shape required including cranking , bending spiraly for hooping for columns, hooking with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed

Returning and filling in soil incl levelling, watering and well rammingin layers n. exc 25cm in fdn trenches. And complete all as specified and directed

Removing excavated soils n.exc.50m and depositing where directed at a level n.exc.1.5m above the starting point outside MoD land complete all as specified and directed

M&L for demolition of cement Concrete(unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for double wall corrugated drain pipes of 150 mm dia bore class SN-8, laid and jointed using rubber ring joints complete with collars etc complete all as specified and as directed.

M&L for double wall corrugated drain pipes of 200 mm dia bore class SN-8, laid and jointed using rubber ring joints complete with collars etc complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering , cutting out existing benching for and forming branch channel in cement conc 1:2:4 type B-1 smooth finished and making good benching for 150 mm bore SGSW sewage pipe as specified.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces , finished even & smooth without using extra cement complete all as specified. Note : - 1.Supply only water proofing compound shall be measured and paid for separately.

Supply only integral water proofing compound.

M&L Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out and complete all as specified and directed

M&L Cement concrete (type D2 1:4:8) of 75mm thickness in sub-floors, sub-bases, floors and pavings etc. complete all as specified and directed

M&L cement mortar (1:4) for screed bed or bedding layer of mortar 15mm thick for laying floor finishes complete all as specified and directed

M&L for exterior grade coloured,glossy finish, rubber pressed precast chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed

M&L for 100 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/roads etc complete all as specified and directed by Engineer-In-Charge

M&L for 20 mm thick sand cushioning including watering and consolidations etc complete all as specified and directed.

M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006 of 80 mm thick, M- 40 grade to match with grey cement and pigment etc complete all as specified and as directed

S&F SFRC drain cover 75mm thick factory made with hole type plain surfaces as per requirement inculding steel reinforcement 75 x 1.5mm flat iron frame all around the cover complete all as specified and direted by Engr-in-Charge.

S&F GI Powder coated GI Snap Grid Frame Work of size 605x605mm as in False Ceiling with supported hanging of Mild Steel Rod of 'J' Bolt, complete all as specified and as directed.

S & F 4 mm thick designer Fibre cement board ( E-board) Tile of size 595x595 mm of approved texture, blossom, fixture and primer finished complete , complete all as specified and as directed. Note : Weight not less than 4.84 Kg /m2 Make : Everest or Equivalent.

S&F rolled sections, MS Angles, MS tubular Structures, MS Channels, Tee, etc. (Fe 410-W Gde-E-250 quality-A) as in main and cross beams, hip and jack rafters, purlins , posts,trusses (framed or unframed) structures where connected to common rafter and running rails and guides for sliding doors, fixed with angles clleats or other connecting plates all as specified.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in Charge

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in floor finishing complete all as specified and directed

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 40cm x 40cm x 25mm thick ( as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid over including 15 mm thick cement screed bed in CM 1:6 . complete all as specifed and as directed

M&L preparing newly plastered surfaces of Walls and applying Two Coats of acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

S & F for PVC (SWR) pipes 300mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in CM 1:4:8, type D-2( 40mm graded stone aggregate)

S&F Plain white pvc Board 18 mm thick as required in Door, Shelves for Cup Boards or Kitchen Cabinets, one side laminated, one side plain , jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws,including Locking Arrangements, sliding channel complete all as specified and as directed. complete all as specified and as directed. Make : Rajshree, Centuryply, sintexplastic

S&F Coloured PVC Board 18 mm thick as required in Door, Shelves for Cup Boards or Kitchen Cabinets, one side laminated, one side plain , jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws,including Locking Arrangements, complete all as specified and as directed. Make : Rajshree, Centuryply, sintexplastic

S&F factory made PVC 5.5mm thick PVC Celuka ply one side decorative lamination and other side plain/coloure for back of kitchen cabinets complete complete all as directed by Engr-in-Charge.

S&F Frog hinges/slip on cabinet hinges by making adequate hole in 18 mm board from inside and fixed to cupoard shutter and frame by screw, complete all as specified and as directed.

S&F Stainless Steel Silver chrome Door Handle 100mm long, suitable for fixing of Brass screws inside of the board etc, and Fixed-in-repairs,complete all as specified and as directed.

M&L 18-20mm thick granite, Z black (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded.including dismantling of effected area all as specified and directed by Engr -in-Charge.

S&F Wash basins, vitreous china, white, counter top basin of size 635x415x190mm, (cat pat No ARS-WHT-39601) including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe complete all as specified and as directed.

S&F single lever surgical purposes elbow action sink mixer (wall mounted ) with extended operating lever, connecting to legs and wall flanges (cat part No FLR-5166 make -Jaguar or equivalent

Dismantling and refixing of gyser with all connected fitting all as directed by Engr-in-charge.

S&F 20mm dia pipes with cutting, pinning, chisel with connected all fittings note- ('The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing, where required.) 20mm bore of pipe

S&F PVC connection 15mm size with PTMT nuts of length 450mm.

S&F Brass Chromium Plated Tubular Towel Rail 20mm dia ‘D’ type 60 Cm long with Brackets and Fixed-in-repairs, complete all as specified and as directed. MAKE : PARRYWARE / JAQUAR/ ESSCO (as approved by GE)

M&L for point wiring complete with copper conductor PVC insulated FRLS Cable 1100 volts grade in PVC conduite complete all as specified and as

(a) One light point /Bell point/Fan point controlled by one switch with cable 1.5 Sqmm size all as specified and directed

(b) One 3 pin socket outlet 5 Amps on Same board including singal core multi-stranded copper conductor 1.5 sqmm PVC insulated and unsheathed cable drawn in same conduit as earth wire to the common earth and connecting to earth duly all as specified

(c) One 5 pin socket outlet 5/6 Amps on independent board including singal core multi-stranded copper conductor 1.5 sqmm PVC insulated and unsheathed cable drawn in same conduit as earth wire to the common earth and connecting to earth doily all as specified

(d) Ditto- but with cable 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm multi-stranded copper unsheathed complete all as specified and as directed.

Supply and fix switch piano type one way 6 Amps flush type ,240 volt AC all as specified and directed.

Supply and fix switch piano type one way 16 Amps flush type ,240 volt AC all as specified and directed.

Supply and fix socket 2 in 1, 3/5 pin, 6 and 16 Amps flush type ,240volt AC all as specified and directed.

Supply and fix ceiling rose surface bakelite with three terminals complete all as specified and directed.

Supply & Fix Double pole Sheet matel enclosure box with a two pin and earth plug and socket complete with singal pole MCB 20 Amps all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing LED flood light 70 watts 220 V AC outdoor type with thermal management in multiple optic and equipped with IP66 protection, with impact and corrosion resistance including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Cat part No JETANEOFL70W/LED757LT of Havells or equivalent out of makes specified in list of makes.

S&F wall mounted fan AC Single phase, 230V of size 450mm sweep with blades and fixing anchore bolts complete all as specified and as directed.

S & F sheet metal enclosures for double door distribution board factory made duly painted 8 way SPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators all as specified and directed.

Supply and fixing miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP240V, 10 KA 'B' curve , in the MCB DB Complete with connection testing and commissioning all as specified and directed..

Supply and fixing miniature circuit breaker (MCB) of SPN and current carrying capacity 40 Amps 240V, 10 KA 'B' curve , in the MCB DB Complete with connection testing and commissioning and including taking down complet all as specified and directed.

Supply and fixing MCCB 125 Amps, TPN, Breaking capacity 16 KA, 415 V 'B' curve adjustable type all as specified of capacity

M&L for submain wiring 2 single core PVC insulated FRLS cable 6 Sqmm copper conductor PVC sheathed in and including rigid PVC concealed conduit heavy duty of suitable size incl cutting chiseling of wall and making good to disturbed surface of walls / floor etc with plastering painting etc so as to match with the existing finishes, drawn with 6 Sqmm PVC insulated FRLS copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified. (Make of cable :- Finolex/ Polycab/ Havells )

M & L for earthing complete in repairs with galvansihed steel earth plate electrode 600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified and directed.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 Volts grade aluminum conductor of size 16 sqmm 4 core (Excavation and Earth works taken separatley)

Excavation in trenches in hard/tense soil not exceeding 1.5 metre deep and not exceeding 1.5 metre wide and getting out including dressing / trimming sides and leveling/grading and ramming of bottom of excavation complete as sepecified and directed by Engr-in-Charge.

Returning, filling in including spreading, leveling, watering and well raming excavated soid in layers not exceeding 25 cm thick, filling back in trenches after cables have been laid and tested, poles, stays, struts have been erected and tested complete as sepecified and directed by Engr-in-Charge.

Removing of surplus soil to a distance n.exc 50 mtr and depositing at a level n.nexc 1.5 mtr above starting point where directed complete as sepecified and directed by Engr-in-Charge.

M&L for sand cushioning in trenches for protection of LT under ground cable including punning and consolidation complete as sepecified and directed by Engr-in-Charge.

Supply and Laying Bricks old size sub class 'B', of class designation 10, for the protection of cable laid flat dry across the cable complete as sepecified and directed by Engr-in-Charge..

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including GI pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as directed.

Please Enable Macros to View BoQ information