REPAIR RECANNING PAINTING RE WEAVING AND POLISHING OF VARIOUS TYPES OF WOODEN STEEL FURNITURE AND SPECIAL REVOLVING CUSHIONED CHAIR AND TABLES AT RMS DIMAPUR UNDER BSO

Amount

Sofa set Five and Four seater (Qty 32 & 08 Set) (Drg No FD-281) Taking out old unsv components of Sofa set five & four seater and S& F new components as per shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New Seat Rails Right and left of Sofa set (Single Seater)

(b) New Seat Rails Front and Back of Sofa set (Single Seater)

(c) New Rails of back frame Top and bottom of Sofa set (Single Seater)

(d) New Back and bottom support of Sofa set (Single Seater)

(e) New long rails of seat front and back of Sofa set (Three Seater)

(f) New long rails of Back frame Top and bottom of Sofa set (Three Seater)

(g) New long Back and bottom support of Sofa set (Three Seater)

(h) New Arms of Sofa set.

(j) New bearers of seat and back rest of Sofa set.

(k) Taking out old unsv foam cushion and S & F new cool foam cushion 32 Kg/cum density of make Sleepwell/Kurlon of size 580x560x100mm and superior quality tapestry cloth cover duly stitched at one end with openable zip and other making good shape (Tapestry cloth not less than Rs.295/- per mtr) colour & pattern as approved by GE/Engr-in-Charge.

(l) M & L for polishing of two coats of french polish internal and external to the Sofa Set 5 seater including cleaning and preparing the old surfaces complete all as specified and as directed.

(m) M & L for polishing of two coats of french polish internal and external to the Sofa Set 4 seater including cleaning and preparing the old surfaces complete all as specified and as directed.

(n) Supply only new tapestry cloth cover duly stitched at one end and at other end with openable zip and to fit for sofa cushion 580x560x100mm (Tapestry cloth not less than Rs.295/- per mtr) colour and pattern as approved by GE/Engr-in-Charge.

Chair writing (Qty 325 Nos) (Drg No FD/E6/MAP/12) Taking out old unsv components of Chair writing and S & F new Components as per shape and size as existing complete all as specified and shown on drawing and as directed by Engr-in-charge :-

(a) Cushion seat alongwith approved coloured fabric.

(b) Cushion back alongwith approved coloured fabric.

(c) Supply and fixing new tapestry cloth cover with seat & back duly stitched (Tapestry cloth not less than Rs.290/- per mtr) colour and pattern as approved by GE/Engr-in-Charge.

(d) New arms.

(e) Taking out cushion seat of chair writing and spot welding to joints of existing MS flat iron of size 25x3mm welded to the bottom frame and refix the removed cushion seat as specified and shown on drawing and as directed.

(f) Removing of existing paint by scraping with abrasive cloth and painting one coat of synthetic enamel paint black on steel surfaces of chair writing after preparation of surfaces complete all as specified and as directed.

(g) Hard rubber shoes with appropriate size steel screw

Table computer (Qty 14 Nos) (Drg No FD/E6/MAP/03

(a) Taking out old unsv top from table computer and S & F new top made out of 18mm thick pre-laminated particle board as per existing size and shape complete all as specified and shown on drawing and as directed by Engr-in-Charge

(b) Taking out old unsv sides from table computer and S & F new sides as per existing size and shape complete all as specified and shown on drawing and as directed by Engr-in-Charge

(c) Taking out old unsv sliding key board drawer from table computer and S & F new sliding key board drawer as per existing size and shape complete including telescopic channels all as specified and shown on drawing and as directed by Engr-in-Charge

Table 900 x 600 mm without drawers (Qty 40 Nos) (Drg No FD-284) Taking out old unsv components of Table 900 x 600mm without drawers and S&F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New Top of size 900x600mm made out of 18mm thick pre-laminated particle board teak faced of make-Bhutan/Novopan/Archid & providing teakwood beading 4mm thick all around the top

(b) New legs

(c) New Short Rails

(d) New Long Rails

(e) New Short Stiffners

(f) New Long Stiffners

(g) M & L for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed.

Computer Chair revolving with arms (Qty 25 Nos) (DRG No FD/E6/MAP/01)

(a) Taking out old unsv cushion seat from chair computer and S & F new cushion seat as per existing size and shape alongwith approved coloured fabric complete all as specified and shown on drawing and as directed by Engr-in-Charge

(b) Taking out old unsv cushion back from chair computer and S & F new cushion back as per existing size and shape alongwith approved coloured fabric complete all as specified and shown on drawing and as directed by Engr-in-Charge

(c) Taking out old unsv arms from computer chair and S & F new arms as per existing size and shape complete all as specified and as directed by Engr-in-Charge.

(d) Taking out old unsv castors wheel from computer chair and S & F new twin wheel castors as per existing size and shape complete all as specified and shown on drawing and as directed by Engr-in-Charge

(e) Taking out old unsv five Pronged base and new 5 pronged base 10.5mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the castors including replacement of gas lift of 100mm stroke length and gas pressure of 300n force as existing.

Chair Revolving Executive with arms high back (Qty 06 Nos) (Drg No TP)

(a) Taking out old unsv cushion seat from chair revolving executive with arms high back and S & F new cushion seat as per existing size and shape alongwith approved coloured fabric complete all as specified and as directed by Engr-in-Charge.

(b) Taking out old unsv cushion back from chair revolving executive with arms high back and S & F new cushion back as per existing size and shape alongwith approved coloured fabric complete all as specified and as directed by Engr-in-Charge.

(c) Taking out old unsv arms from chair revolving executive with arms high back and S & F new arms as per existing size and shape complete all as specified and as directed by Engr-in-Charge.

(d) Taking out old unsv castors wheel from chair revolving executive with arms high back and S & F new twin wheel castors as per existing size and shape complete all as specified and as directed by Engr-in-Charge.

(e) Taking out old unsv five Pronged base and new 5 pronged base 10.5mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the castors including replacement of gas lift of 100mm stroke length and gas pressure of 300n force as existing.

Table Dining 8 Pers (Qty 15 Nos) (Drg No FD-273) Taking out old unsv components of Table Dinning 8 Pers and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New top of size 1800x900mm made out of 18mm thick pre-laminated particle board teak faced of make-Bhutan/Novopan/Archid and providing Teak wood beading 4mm thick all around the top includig fixing of 8 Nos wooden corners to joning corner of rails and legs for each table as directed.

(b) New Legs

(c) New Long Rails

(c) New Short Rails

(e) M & L for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed.

Table Writing (Qty 70 Nos) (Drg No FD-275) Taking out old unsv components of Table Writing and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New Top of size 1145x600mm made out of 18mm thick pre-laminated particle board teak faced of make-Bhutan/Novopan/Archid & providing teakwood beading 4 mm thick all around the top.

(b) New Legs

(c) New Top Rails

(d) New Stiffners

(e) New Drawers

(f) New Shutter of cupboard of size 405x335mm made out of 18mm thick pre-laminated particle board teak faced and providing CP Knobs and piyano hinges for hanging with the table

(g) New 6 mm thick commercial ply make- Globe/Green/Archid on back of cupboards

(h) M & L for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed.

Table Centre (Qty 50 Nos) (Drg No FD-274) Taking out old unsv components of Table Centre and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New Top of size 450x900mm made out of 18mm thick pre-laminated particle board teak faced of make-Bhutan/Novopan/Archid and providing Teakwood beading 4 mm thick all around the top

(b) New Legs

(c) New Long Rails

(d) New Short Rails

(e) M & L for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed.

Table 900 mm x 600 mm with drawers (Qty 20 Nos) (Drg No FD-283) Taking out old unsv components of 900 x 600 mm with drawers and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New Top of size 900x600mm made out of 18mm thick pre-laminated particle board teak faced of make-Bhutan/Novopan/Archid and providing Teakwood beading 4 mm thick all around the top.

(b) New legs

(c) New Short Rail

(d) New Long Rails

(e) New Short Stiffners

(f) New Long Stiffners

(g) New Drawers

(h) M & L for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed.

Talbe 900 x 900 mm (Qty 65 Nos) (Drg No FD-291) Taking out old unsv components of Table 900 x 900mm and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New Top of size 900x900mm made out of 18mm thick pre-laminated particle board teak faced of make-Bhutan/Novopan/Archid and providing Teak wood beading 4 mm thick all around the top includig fixing of 8 Nos wooden corners to joining part of rails and legs for each table and as directed.

(b) New legs

(c ) New Rails

(d) M & L for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed.

Table Dining 6 Pers (Qty 50 Nos) (Drg No FD-273) Taking out old unsv components of Table Dinning 6 pers and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New Top of Size 1500x900mm made out of 18mm thick pre-laminated particle board teak faced of make-Bhutan/Novopan/Archid and providing Teak wood beading 4mm thick all around the top includig fixing of 8 Nos wooden corners to joning corner of rails and legs for each table as directed

(b) New Legs

(c) New Long Rails

(d) New Short Rails

(e) M & L for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed.

Teapoy (Qty 80 Nos) (Drg No FD-278) Taking out old unsv components of Teapoy and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New Top of size 450x600mm made out of 18mm thick pre-laminated particle board teak faced of make-Bhutan/Novopan/Archid and providing Teakwood beading 4mm thick all around the top

(b) New Legs

(c) New Long Rails

(d) New Short Rails

(e) M & L for polishing of two coats of French polish of best quality to the teapoy after preparation of old surfaces as specified and as directed.

Peg table (Qty 250 Nos) (Drg No FD-277) Taking out old unsv components of Peg table and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New Top of Size 450x300mm made out of 18mm thick prelaminated particle board teak faced of make-Bhutan/Novopan/Archid & providing teakwood beading 4mm thick all around the top

(b) New Legs

(c) New Long Rails

(d) New Short Rails

(e) M & L for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed.

Bed Plywood Top (Qty 125 Nos) (Drg No FD-246) Taking out old unsv components of Bed Plywood Top and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New Top of 12 mm thick ply wood commercial BWR grade. Make-Globe/Green/Archid

(b) New Long Rails.

(c) New 4 mm thick ply wood one side teak face of size 660 x 900 mm to head board and 4 mm thick teak wood beading all round the head board.

(d) New 4 mm thick ply wood one side Teak face of size 900 x 300 to foot board and 4mm thick teak wood beading all round the foot board.

(e) New legs.

(f) New bottom support.

(g) M & L for polishing of two coats of French polish of best quality to the bed after preparation of old surfaces as specified and as directed.

Table Dressing Ladies (Qty 20 Nos) (Drg No FD-251) Taking out old unsv components of Table Dressing Ladies and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New looking mirror of size 1220 x 365 mm & 5mm thick make-Atul/Modi Guard/Saint Gobin

(b) New Frame and back member of the mirror including back side 6 mm thick commercial plywood make-Globe/Green/Archid

(c) New legs

(d) New Top of size 900x325mm made of 18mm thick pre-laminated particle board teak faced of make-Bhutan/Novopan/Archid and providing 4mm thick Teakwood beading on front.

(e) New drawers.

(f) New glass panes shutters 5 mm thick alongwith aluminium channel and glass runners.

(g) M & L for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed.

Table Dressing Gents (Qty 08 Nos) (Drg No FD-230) Taking out old unsv components of Table Dressing Gents and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New looking mirror of size 760 x 380mm & 5mm thick make - Atul/Modi Guard/Saint Gobin

(b) New Frame & back member of the mirror including back side 6 mm thick commercial plywood make-Globe/Green/Archid

(c) New drawers.

(d) New Top made out of 12 mm thick pre-laminated particle board teak faced of make-Bhutan/Novopan/Archid and providing 4 mm thick Teakwood beading on front side.

(e) M & L for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed.

Hat Stand with Mirror (Qty 18 Nos) (Drg No 233) Taking out old unsv components of Hat Stand and S& F new Components as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New looking mirror of size 300 x 440mm & 5mm thick make - Atul/Modi Guard/Saint Gobin

(b) New 4 mm thick plywood one side teak face make -Kitply/Greenply/Archid on front of size 1000 x 710 mm & New Teak wood edging of size 6 x 35 mm all around the hat stand

(c ) New Aluminium Pegs 100 mm long

(d) M & L for polishing of two coats of French polish of best quality to the Hat stand after preparation of old surfaces as specified and as directed.

Side Board (Qty 20 Nos) (Drg No FD-241) Taking out old unsv components of Side Board and S& F new Components as per Shape and size as existing made out of pre-laminated particle board of make-Bhutan/Novopan/Archid all as specified and shown on drawing and as directed by Engr-in-Charge :-

(a) New Top.

(b) New Sides Left and Right.

(c ) New Shutters and providing CP Knobs 40mm and drawer lock 4 lever to the shutter.

(d) New Drawers.

(e) New back of 6mm thick commercial plywood of make-Globe/Green/Archid

(f) New Legs made of first class teak wood seasoned.

(g) M & L for polishing of two coats of French polish of best quality to the side board after preparation of old surfaces as specified and as directed.

Chair Dining (Qty 300 Nos) (Drg No FD-279) Taking out old unsv components of Chair Dining and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by Engr-in-charge :-

(a) Front legs

(b) Rear legs

(c ) Front rails

(d) Side rails

(e) Back rails

(f) Back rest

(g) Stiffeners

(h) M & L for polishing of two coats of French polish of best quality to the chair after preparation of old surfaces as specified and as directed.

Chair Easy (Qty 180 Nos) (Drg No FD-229) Taking out old unsv components of Chair Easy and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by Engr-in-charge :-

(a) Front legs

(b) Rear legs

(c) Side rails

(d) Front rails

(e) Back rest

(f) Arms

(g) M & L for polishing of two coats of French polish of best quality to the chair after preparation of old surfaces as specified and as directed.

Stool Dressing (Qty 15 Nos) (Drg No FD-282) Taking out old unsv components of Stool dressing and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by Engr-in-charge :-

(a) Legs

(b) Long rails

(c) Short rails

(d) Stiffeners

(e) M & L for polishing of two coats of French polish of best quality to the stool after preparation of old surfaces as specified and as directed.

Chair Writing (Qty 120 Nos) (Drg No FD-280) Taking out old unsv components of Chair Writing and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by Engr-in-charge :-

(a) Front legs

(b) Rear legs

(c ) Front rails

(d) Side rails

(e) Back rails

(f) Back rest

(g) Arms

(h) Stiffeners

(j) M & L for polishing of two coats of French polish of best quality to the chair after preparation of old surfaces as specified and as directed.

Chair Easy, Dining, Writing and Stool Dressing (Drg No FD-229, 279, 280 & 282) Removing of old unsv plastic cane and M & L for re-canning of various types chairs and stool dressing etc,with half round plastic cane 2mm wide 0.4mm thick for seat and back, border with 4mm wide 0.5mm thick, finished smooth glossy and edges free from sharp cut complete all as specified and as shown on drawing and as directed by Engr-in-charge.

Chair Varandah with Nylon Newar (Qty 250 Nos) (Drg No FD-256)

(a) Removing old unsv tape newar from Chair Varandah and S & F new pieces of conduit pipe 20mm dia of 75 mm Long and 1.6mm thick and welded to the worn out piece of legs the chair and also spot welding of cracks and joints as specified and shown in drawing and as directed by Engr-in-Charge.

(b) M & L for applying one coat of synthetic enamel paint white to the frame of the chair after preparation of surfaces as directed by Engr-in-Charge.

(c) M & L for weaving of chair varandah with 50-55mm wide tape virgin nylon newar best quality light coloured as specified and shown in drawing and as directed by Engr-in-Charge.

(d) New hard rubber shoes with inside steel washers for legs.

Chair Dining Offrs (Qty 200 Nos) (Drg No FD/MAP-II/04 ) Taking out old unsv components of Chair Dining Offrs and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by Engr-in-charge :-

(a) Front legs

(b) Rear legs

(c ) Front rails

(d) Side rails

(e) Back rails

(f) Back rest

(g) Cushion seat alongwith approved coloured fabric

(h) Supply and fixing new tapestry cloth cover with seat duly stitched (Tapestry cloth not less than Rs.290/- per mtr) colour and pattern as approved by GE/Engr-in-Charge.

(j) Stiffeners

(k) M & L for polishing of two coats of French polish of best quality to the chair after preparation of old surfaces as specified and as directed.

Chair Dining JCOS/ORs (Qty 150 Nos) (Drg No FD/MAP-II/05) Taking out old unsv components of Chair Dining JCOs/ORs and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by Engr-in-charge :-

(a) Front legs

(b) Rear legs

(c ) Front rails

(d) Side rails

(e) Back rails

(f) Back rest

(g) Stiffeners

(h) New PVC seat

(J) M & L for polishing of two coats of French polish of best quality to the chair after preparation of old surfaces as specified and as directed.

Chair Varandah (Qty 190 Nos) (Drg No FD/MAP-II/06) Removing old unsv PVC Seat from Chair Varandah and S & F new Components as per shape and size as existing all as specified and shown in drawing and as directed by Engr-in-Charge.

(b) M & L for applying one coat of synthetic enamel paint white to the frame and spot welding of cracks and joints of the chair after preparation of surfaces as directed by Engr-in-Charge.

(c) New PVC seat

(d) New PVC back

(e) New hard rubber shoes with inside steel washers for legs.

Charpoy GI Pipe with plywood top (Qty 435 Nos) (Drg No FD-220) Taking out old unsv components from charpoy GI pipe and S & F new components as per existing shape & size complete all as specified and shown on drawing and as directed by Engr-in-Charge.

(a) New Top of 12 mm thick ply wood commercial of make-Globe/Green/Archid

(b) New MS plate 50x6mm thick and 900mm long painted with two coats of black paint over a coat ofred oxide.

(c) Removing existing unserviceable long rails from charpoy GI Pipe and Supply and fixing with new long rails made out of GI pipe 32 mm dia, medium grade, as per existing shape and size and making necessary threads on both ends complete all as specified and shown on drawing and as directed by Engr-in-Charge.

(d) Fixing only short rails (converted from retrieved long rails) of charpoy GI pipe including necessary cutting, threading, complete all as specified and as directed (Note : GI pipe retrieved from item No 29(c) above shall be re-used under this item)

(e) Fixing only legs (converted from retrieved short rails) of charpoy GI pipe made out of 32mm dia GI pipe with necessary cutting, threading and welding FI clamp two Nos etc. complete all as specified and as directed. (Note : GI pipe retrieved from item No 29(d) above shall be re-used under this item)

(f) Supply and fixing new 3 way GI elbow (ISI marked) suitable for 32mm bore GI pipe complete all as specified and as directed.

(g) Supply and fixing new check nut 6mm thick (ISI marked) suitable for 32mm bore GI pipe complete all as specified and as directed.

(h) New hard rubber shoes with inside steel washers for legs.

(j) M & L for applying one coat of synthetic enamel paint aluminium GI pipe and black paint of ftat iron after preparation of surfaces and as directed.

SHRI HRIDAY NARAIN GIRI

SHRI MADAN SINGH

SHRI VIKASHE ZHIMOMI