CIVIL, ELECTRICAL AND FURNISHING WORKS FOR THE PROPOSED LABS UNDER PROJECT SANVIKSHA AT SAG METCALFE HOUSE DELHI UNDER GE (I) RND DELHI

Amount

Taking down chowkhats or frames n.exc 1.5 sqm (without taking off shutter from the frame) each doors and windows etc complete all as specified and directed

Taking down chowkhats or frames exc 1.5 sqm and N,exc 4 sqm (without taking off shutter from the frame) each doors and windows etc complete all as specified and directed

M&L aluminium alloy powder coated for doors,partitions (fixed portion) frames with extruted built up standard tublar sections /appropriate sections of approved make confirming to IS 733 and IS 1285 fixing with dash fastners of required dia and size including filling up the gaps at junctions at top,bottom and sides with required EPDM rubber/neoprene gasket etc. including aluminium snap beading for glazing /paneling CP brass ,stainless steel screws complete all as specified and directed .

S&F aluminium powder coated section door shutters consisting top rail and style 82.77X44.45X1.60 mm thick bottom and lock rail 150X44.45X1.60 mm including jointing clips,aluminium snap beading,rubber gasket,glazing clips,two aluminium handles of size 200mm,01 No. tower bolt 200 mm ,necessary hinges per leaf complete all as specefied and directed. Note:-Glass and boards shall be measered and paid saprately.

S&F powder coated, any colour, aluminum windows (fixed/openable/sliding type as per site requirement ) and ventilator shutters, (minimum thickness of powder coating 50 micron), made out of aluminum tubular frame of section 63.5 x 38.10 x 1.6 mm thick and shutter horizontal and vertical members of alum section 47.50 x 44.45 x1.6 mm thick, aluminum beading, including necessary jointing cleats, glazing clips, ruber packing,, screws, aluminium fittings such as peg stays 150 mm long (01 No), hinges type B-21 100mm long (02 Nos),Tower bolts 02 No.s, suitable handle (01 No) in each shutter complete all as specified and directed.

S&F 4.80 /5 mm thick sheet glass ordinary quality and glazing with oil putty in squre/rectangular of required size all as specified and directed.

M&L 12 mm thick prelaminated particle boards interior grade prelaminated one side with decorative choice laminations and otherside balancing white fixed with screws to frame work all as specified and directed.

S&F Mild Steel Framed work such as Guard Bar/grill welded to window frame or fixed independently, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F in repair double action floor spring hydraulic regulated made up of minimum1.25 mm thick aluminium alloy sheets foundation box,main body with stainless steel cover all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F manullay opening and closing roller type blinds approved make with charecteristic composition 100 % polyester ( semi translucent), fixed in position complete, all as specified and as directed.

Dismantling stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar etc all as specified and directed.

M&L 20mm thick machine cut kota stone slab (table rubbed and polished) as in flooring/windows cill/skirting etc laid over and including 15 mm thick screed bed or bedding layer in CM (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of slab including, cutting, rubbing, grinding and mirror polishing including providing a pattern of diffrent colour marble strips if required complete all as specfied and directed.

Material and labour for 16-18 mm thick granite stone slab as in window cill/pillers/stair steps,floors or platform,machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixtur of pigment to match the shade of granite stone including grinding/moulding and polishing laid over and including 15 mm thick sereed bed in CM 1:4 including making pattern of diffrent colour granite stone as directed complete all as specified and directed

Material and labour for 18-20 mm thick green marble works(table rubbed and polished) as in window cill/pillers/stair steps,cooking platform,floors,skirting etc including pointing in white cement in CM 1:4 using marble dust with admixture of pigments to match the shade of marble stone including grinding/moulding and polishing laid over and including 15 mm thick sereed bed in CM 1:4 including making pattern of diffrent colour granite stone as directed by GE complete all as specified and directed

Dismantling wrought iron or mild steel work of any descriptions not otherwise provided for all as specefied and directed

M&L for providing and fixing stainless steel (grade 304) railing made of hollow tubes,channels,plates ,bulbs etc including welding,grinding,buffing,polishing and making curvature(wherever required)and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary steel dash fastners,of required size on the top of floor or the side of waist slabs with suitable arrangments all as specified and directed.

Dismantling wall and ceiling boards(fiber,pulp,insulation etc) or insulation boards any thickness including cover fillets.

M&L false ceiling using powder coated grid system of GI moulded grid size 600x600mm with main runner 38x24x0.7mm,cross tee 25x24x0.7mm and wall angle 24x24x0.70mm using 12 mm thick mineral fiber boards fitted in the grid, grid system hanges by 3 to 4mm dia G.I wire to purlin, trusses, RCC slab of the roof etc. with hold down clips, butterfly clips, height fixtures etc complete all as specified and directed.Make Armstrong or equivalent

Dismantling bricks tiles or concrete tiles single layer on roofs and removal, etc complete all as specified and directed

Demolition of mud phuska on roofs any thickness including mud plastering (whether full thickness removed or only a part thereof) complete all as specified and directed

M&L for preparation of surfaces to achieve clean and sound concrete surfaces float finished and free from cavities and projecting nibs. All substrates should be dry clean and free of dust, plaster, oil,paint, grease, corrosion, deposits, and any other deleterious substances. Crackes/honey comb will be repaired by chasing open the area minimum 20mm depth in V-groove shape. All the chased substrate should be sound and cleaned using water. Smooth substrate must be mechanically roughened to provide an adequate key applying bond coat on the prepared surface with Nitobond SBR latex of FOSROC/smartcare repair polymer SBR latex of Asian paints/pidilite (Dr. Fixit Super Latex) or equivalent of Sika mixed slurry coat (1 SBR:1water:3 Cement). Reinstallement polymer modified mortar shall be complete within the overlay time of bonding coat. Later reinstating the chased area with Nitobond SBR latex admixed PMM, of FOSROC/Smartcare Repair polymer SBR latex admixed PMM of Asian paints/Pidilite (Dr. Fixit Pidicreate URP) or equivalent of sika inculding finsihing, curing, complete all as per manufacturer's instruction and directed by Engr-in-Charge. Bore packing:- Opening the periphery of the existing frains minimum 20 mm depth and sealing the same with high strenth non shrink epoxy mortar like Nitomortar S of FOSROC/APCOREP Epoxy Mortar of Asian paints/ Pidlilite (Dr. Fixit Expoxy Mortar) or equivalent in sika in the gap around drainage pipes (between pipe and concrete) complete all as per manufacturer's instruction and directed by Engr-in-Charge.

M&L for Injecting nozzle packing Drill and fixing injection packers in RCC members for cementitious grouting, drilling holes in structural members at the intervals as per recommendation/requirements, cleaning the holes by air blower prior to fixing nozzles. Insert 12 mm dia, 50-75mm long PVC or equivalent injection packers in cleaned holes with fast setting mortar like Renderoc Polug of Fosroc/pidilite (Dr. Fixit Instant Leak Plug) or equivalent in Asian paints/sika. Cut the packers by cut of wheel after completion of the grouting without damaging structural elements. Injection Grounting: Supply and applying with pressure (mechanical means) plasticuised expanding grout admixed cementitious grouts Cebex 100 of FOSROC/Pidilite (Dr. Fixit Pdidicrete AM) or equivalent in Sika/Asian paints having chloride contents-Nil as per BS:5075, Typical unrestrained expansion of upto 4% in general.The admixed should be mixed @225 gms per 50 Kg of cement.

M&L for hacking up the corners using suitable mean, later cleaning the same using water, followed by the application of Nitobond SBR latex or smartcare Repair polymer equivalent in Sika/pidilite (Dr. Fixit Super Latex) mixed slurry coat (1SBR:1water:3 cement) & later filling and making 100 mmx100mm concave coving using Nitobond SBR latex admixed PMM of FOSROC/smartcare Repair polymer SBR latex admixed PMM of Asian Paints/pidilite (Dr. Fixit Pidicrete URP) or equivalent of sika including finishing, curing, all complete all as specified and directed.

M&Lfor Waterproofing Treatment over mother slab by Providing and applying 2 layers of FOSROC proofex Torchseal-3PI strandard or Asian paints smartcare APP membrane/pidilite (Dr. Fixit Torchshield P 3160) or equivalent in Sika -3mm thick Non-woven polyster mat reinforced APP modified bituminious membrane. The system is applied in double layers (one in x-direction, other in y-direction). Membrane to be overlapped for 100 mm sideways and 150 mm at the end laps with each having followings specifications: a. Membrane thickness :3 mm (+/-10%) b. Tensile strenth ASTM D5147: >400N/5 CM(L&T) c. Tensile tear strenth ASTM D4073: 200N/5 CM d. Resistance to water pressure-DIN 52123: No Leak e. Elongation ASTM D5147 f. Water tightness (EN 1928-1) kPa: 60m System included Priming the substrate with Proofex Torchseal Primer/proofex smartcase bitumen Primer/pidilite (Dr. Fixit Torchshield Primer) or equivalent in sika (at consumption 0.4 litres/sqm), Provision and application of 3mm thick Proofex torchseal of fosroc/smartcare app membrane of Asian paints or equivalent in sika/pidilite (Dr. Fixit Torchshield P 3160) in double layer and termination of the membrane at 450 mm from the roof level in groove of 50mmx50mm filled with Nitoseal PU 50 of Fosroc or smartcare hybrid PU sealant/pidilite (Dr. Fixit PU Sealant) or equivalent in sika.

M&L providing and installing 300 GSM non-woven geotextile membrane over the finish waterproofing treatment prior to protection screed

M&L for Providing and laying PCC of M20 grade (min50 mm thick finishing at the drain pipe) mixed with approved water proofing compound like Conplast WLXtra of fosroc or smartcare VltaliaNEO of Asian paints/pidilite (Dr. Fixit Pidiproof LW+) or equivalent in sika an advanced technology based, corrosion resistance admixed as per ASTM G1, IS 2645, JISZ 1535 mixing @ 200 ml/bag of cement, includig control joints (6mm wide and 10 mm deep) at every 3mx3m panel size, making angle fillet of 75mmx75mm using M20 grade concrete at the corners.

M&L for induced control joints in the screed concrete with sealant fosroc Nitoseal PU 50/Asian Paints Smartcare PU Sealant/Dr. Fixit PU Sealant of pidilite or dequivalent in Sika.

M&L for Providing and applying 15 mm thick cement plaster proportion 1:4 admixed with integral waterproofing admixed conplast WLXtra of FOSROC / smartcare VLtaliaNEO of Asian paints/Pidilite (Dr. Fixit Pridifroof LW+) or equivalent in Sika an advanced technology based, corrosin resistance admixed as per IS2645, ASTM G1, JISZ 1535 mixing @ 200ml/bag of cement. This shall include all chamfering, rounding off of corners, protrusion and shall include shutttering cost or as per Engineer-in-charge specification. Cement and sand will be in client scope. Note: (a) MoU will be done by the contractor with the OEM for carrying out water proofing treatment and works shall be carried out through a specialized and authorized applicators of OEM only. (b) Rate include cost of necessary sccaffolding upto G+7 storeys.

Taking up or down 15 mm bore steel tubing & connection including cleaning for refixing all as specified and as directed .

Taking up or down 20 mm bore steel tubing & connection including cleaning for refixing all as specified and as directed .

Taking up or down 25 mm bore steel tubing & connection including cleaning for refixing all as specified and as directed .

Taking up or down 40 mm bore steel tubing & connection including cleaning for refixing all as specified and as directed .

S&F steel water tubing 15 mm bore, medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors etc complete all as specified and as directed .

S&F steel water tubing 20 mm bore, medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors etc complete all as specified and as directed .

S&F steel water tubing 25 mm bore, medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors etc complete all as specified and as directed .

S&F steel water tubing 40 mm bore, medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors etc complete all as specified and as directed

Dismantling of PVC water tanks of 1000 Ltr capacity complete all as specified and directed.

S&F rotational moulded polyethylene water storage tannks(cylindrical vertical type) with closed top 1000 Ltr Capicity hoisted and fixed in position all as specified in SSR part -I

S&F in repair Gun metal globe or gate valves with iron wheal head,screwed both ends for iron pipes and fixed 25 mm dia of pipe all as specified and as directed.

S&F in repair Gun metal globe or gate valves with iron wheal head,screwed both ends for iron pipes and fixed 40 mm dia of pipe all as specified and as directed.

S&F Ball valve brass high pressure with polythene float and fly nut complete 25 mm dia all as specified and as directed.

M&L for cleanig away all vegitation,shurbs,brushwood,undergroth digging out roots, filling wholes levelling grounds stacking of serviceable materials and not exc 30 CM in girth and removing rubbish from outside MOD land complete all as specefied and directed by Engr-in -charge.Note:- the cleaning of vegitables/bushes growing up to the three storied building making good with PCC 1:2:4 type B1 and finishing the surfaces to match the existing surfaces including all necessary scafoldings ,T&P etc all as specified and as directed.

S&F in repair cast iron soil waste and vent pipes 100 mm bore with or without ears, with cement joint fixed to walls.

S&F in repair bends CI any radious 100 mm bore all as specified and as directed.

S&F stack clamp out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolt and nut etc for 100 bore of CI pipes

Demolition of brick work built in cement mortar of any description complete all as specified and as directed.

M&L for brick masonry with sub class `B` brick straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed .

M&L for mild steel 10 mm dia and over TMT bar cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia etc complete all as specified and as directed

M&L for mild steel 5 mm dia and over upto and including 10 mm dia TMT bar cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia etc as in stirups spacers and binders complete all as specified and as directed

M&L providing precast cement concrete 1:2:4 type B1 as in door cills,lintels etc and set in cement mortar 1:4 all as specified and directed

Taking down cement plaster from brick or stone wall etc including racking out joint, hacking for key scrubbing down with water etc complete all as specified and as directed .

Material and labour for 15mm thick rendering on brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for 15mm thick rendering on brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed .

M&L for applying 3 mm thick wall care putty on walls all as specefied and directed.

Material and labour for two coats of distemper oil emulsion on new plastered wall including preparation of surfaces etc complete all as specified and directed .

Complete removal of existing treatment from plastered surfaces of walls complete all as specified and directed.

Complete removal of existing treatment from ceiling complete all as specified and directed

Material and labour for applying two coats of OBD over a coat of 3mm thick wall care putty and primer on walls complete all as specified and directed

Material and labour for applying two coats of OBD over a coat of 3mm thick wall care putty and primer on ceiling complete all as specified and directed .

M&L preparation of old steel and iron surfaces over 10 cm wildth or girth and applying one coat of synthetic enemel paint all as specified and directed

M&L preparation of old wooden surfaces over 10 cm width or girth and applying a coat of synthetic enemel paint all as specified and directed

M&L for preparation of new wall surfaces and finishing wall with acrylic smooth exteior paint of required shade with two or more coats over and encluding priming coats of exterior primer on wall /ceiling /facia surfaces complete all as per manufacturer's instructions and as directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of acrylic exterior emulsion paint all as specified and directed .

Dismantling tiles in floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable material to store and rubbish of the premises complete all as specified and as directed.

Material and labour for 1st quality Joint free non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) joint less / joint free, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed .

Material and labour for 1st quality vetrified ceremic tiles 10 mm thick, in Light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors and skirting etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed

Material and labour for 1st quality glazed ceramic designer coloured tiles of size 450x300x7-8 mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing to in white or coloured cement to match the surface over and including 10mm thick rendering in CM (1:4) including making pattern of diffrent colour tiles complete all as specified and directed.

M&L plain,solid straight chokats of 2nd class hard wood wrought framed rebeted on the solid,rounded or chemfered put together with glue pinned at joints all as specefied and directed

M&L PCC (1:3:6) type C1 (20 mm graded stone aggregate) as in filling pressed steel frame / hold fast blocks complete all as specified and directed

S&F 40 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed.

S&F 200 mm size aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and directed .

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed .

S&F 100 mm long Butt hinges, mild steel medium weight cold rolled and fixed, all as specified and directed .

S&F 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed .

S&F mortice lock vertical type 100 mm size 4 lever brass with both side brass handles complete all as specefied and directed.

S&F aluminum alloy door closer hydraulically regulated, desination No 1 universal type, suitable for door shutters upto 851 to 1000 mm wide and of weight between 60 to 80 Kg and fixed to door frame complete all as specified and directed.

M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of syntheatic enammel paint over one coat of pink primer all as specified.

Supply and fixing in repair for 15mm bore brass chromium plated fancy type long body bib cock with wall flange fixed complete all as specified and directed .

Supply and fixing in repair for 15mm bore brass cromium plated fency type pillar tap(swan neck) with capesten head screwed down high pressure with or without lettred hot or cold with long shank & fly nuts etc complete all as specified and directed

Supply and fixing in repair concealed fancy type stop valve/Angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore etc complete all as specified and directed .

Supply & fixing in repair PVC connection 45 cm long with brass check nuts on both sides suitable for 15 mm bore iron pipe etc complete all as specified and directed .

S&F in repair oval type wash hand basin of size 550x400mm , coupling etc fixed as in counter slab complete all as specified and as directed .

S&F in repairs vitreous chinaware wash down water closet pan padestal pattern white excluding fixing bolts but including jointing to flushing cistern and flush pipe anti syphonage pipe etc complete all as specified and directed

S&F plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC low level flushing cistern complete with syphone handled level PVC bend inclduing connecting to WC and fixing on walls with bracket complete all as specified and directed.

S&F in repairs vitreous china Urinal, Half stall type white (excludign flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes complete all as specified and directed.

Supply and fixing in repair brass chromium plated towel Rail of size 600 mm fixed to wall complete all as specified .

S&F in repairs CP brass bottle trap 32 mm dia including jointing to waste fitting and waste pipe complete all as directed .

S&F in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 M long flexable tube and ABS wall hook including making connections and fixed in position complete all as specefied and directed.

S&F in repairs 15 mm dia angle valve double ways chromium plated brass complete all as specified and directed.

S&F CP jet spray with tube for single symphonic EWC complete all as specified and directed.

Supply and fixing in repair soap dish vetrious china white appx size160X160X90 mm fixed to wall with CP brass screws etc complete all as specified and directed.

S&F in repair urinal thoughned glass partition 10 mm thick,eached glass up to 1 Sqm with support of CP frame fancy type as approved by GE complete all as specefied and directed .

Supply and fixing in repair stainless steel with flat recessed type toilet Paper Holder with Flap complete all as specified and directed .

S&F in repair grating of size 100 mm CP for outlet of water complete all as specified and as directed .

Removal of demolished /dismanteled materials, malba etc to a distance of exc 1.5 Km and not,exc 5 Km out side the MOD land all as specified and directed

Supply and laying cable passing through ducting/trenches as site requirement in replacement XLPE insulated screened pvc bedded, galvanised still strip or wire armoured underground cable heavy duty 1100 volts grade with stranded aluminium conductor, cross sectional area 400 sq mm 3.5 core. incl taking out the old unserviceable cable complete all as specified and as directed.

Supply and laying cable passing through ducting/trenches in replacement XLPE insulated screened pvc bedded, galvanised still strip or wire armoured underground cable heavy duty 1100 volts grade with stranded aluminium conductor, cross sectional area 95 sq mm 3.5 core. incl taking out the old unserviceable cable complete all as specified and as directed.

Supply and laying cable passing through ducting/trenches in replacement XLPE insulated screened pvc bedded, galvanised still strip or wire armoured underground cable heavy duty 1100 volts grade with stranded aluminium conductor, cross sectional area 70 sq mm 3.5 core. incl taking out the old unserviceable cable complete all as specified and as directed.

Supply and fix inreplacement MCCB four pole 415 volts 50 Hz ,400 Amps, with rupturing capacity 36KA complete all as specified and as directed including taking down old unserviceable MCCB all as specified and as directed..

M&L for Earthing with Galvanised iron earth plate electrode 600 x 600 & 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to GI earth Strip 32 x 6 mm earth lead by means of GI nuts, bolts & washers earth strip protected with & including 40 mm dia medium grade ISI marked GI pipe not less than 7.5 metre long all as shown in electrical plate No 3 of MES Schedule Part I, with & including; PCC 1:3:6 type C1 pit with cover of RCC 1:2:4 B1 reinforced with welded steel wire fabric not less than 4 Kg per Sqm watering arrangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with mixture of common salt & charcoal, necessary excavation and earth works in any type of soil, including test point, testing & commissioning, complete complete all as specified and as directed.

Excavation in tranches in soft/loose soil not exceeding 1.5m depth not exceeding 1.5m in width for laying of HT cables.

Excavation in tranches in hard/dense soil not exceeding 1.5m depth not exceeding 1.5m in width over energised LT cables for carrying out brick work for preparation of cable duct including for taking out and relaying of LT Cables in hard standing surfaces ,Road cutting etc complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm thick as in soft/loose soil complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level and not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

Supply & laying dry fine sand for cushioning of underground cable laid in trenches/duct complete all as specified and as directed

Supply & laying un-reinforced precast concrete cable cover, class LV type I, flat, size 250mm x 150 mm x 40mm over the HT cable for protection of cable.

M&L for boring of holes under road, pavement, hard standing by trenchless techonology using ultra sound technique and necessary machine including supply and laying of HDPE pipe pf 160 mm dia type PN 4 working pressure complete all as specified and directed.

Supply and laying GI pipe medium grade in replecement of 100mm dia laid in trenches for protection of UG cable complete complete all as specified and as directed.

Supply and laying GI pipe medium grade in replecement of 150mm dia laid in trenches for protection of UG cable complete complete complete all as specified and as directed.

Supply and install hi wall split units indoor/outdoor 2 TR capacity complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity complete all as specified and as directed.

Supply & Fixing Automatic voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with out put volatage stablized at 230V with accuracy of + 2.5% and capacity of 5.0 KVA

Dismantaling and taking down old serviceable GI Strip (lightning conductor) of size 32X6mm roof top and down conductor and refixing the same with the help poroceline insulator of after completion of roof treatment and Grit wash of roof. Note:- Old serviceable GI Strip shall be deposite to MES store for safe custody and refix the same after completed necessary Civil Work. all as specified and directed.

S&F of Air Termination single pointed Aluminium Rod 12mm dia 300mm long complete with fixing rivets, nut bolts and washer complete all as specified and directed.

M&L of Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.

Earth continuity conductor passing through PVC Conduit of size 40 mm main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc as required 32x6 mm galvanised iron strip and fixed with the help of poroceline insulator and screw for roof down conductor complete all as specified and directed.

S&F inreplacement of Aviation Obstraction Light LED lamp 50Hz, 240Watt Die-cast aluminum housing with Red polycarbonate enclosure dome for better illumination and Supper flux 5mm 302nos LEDs incorporated including all fitting accessories complete all as specified and directed

M&L of wiring for circuit/submain wiring along with earth wire with the 2x2.5 sqmm+ 1X 2.5 sq mm earth wire of FRLSH PVC insulated multistranded copper conductor single core cable in and including PVC conduit pipe 25 mm external dia medium grade including all accessories complete all as required or all as specified

Supply and fixing of MCB distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, SPN 4 way. 230 volts with bus bar rating 100 Amps, dust and vermin proof and IP 43 - IK 09 protection suitable for incorporation of MCB, including grouting in the wall, cutting & chasing etc complete all as specified and directed.

Supply and fix MCB SPN 230 volts 50 Hz, 32 Amps, with rupturing capacity 10 KA complete all as specified and as directed

Taking down carefully point wiring aluminium (light, fan, socket, and power) complete (fittings such as switches ceiling roses, pendent regulators sockets etc to be measured and paid for separately removing materials to store for keeping of safe custody and making good the disturbed surfaces complete all as specified and as directed.

M&L for point wring for one light/ceiling fan point controlled by one switch with 2 run of 1.5 sqmm PVC insulated and unsheathed multi stranded copper conductor cable FRLSH in and including concealed PVC conduit 20 mm dia medium duty ISI marked, including suitable new GI sunken boxes, modular frame and cover plate for fixing of modular switches as per required module for one light point/ fan point, controlled by one switch independent including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLSH connected to common earth doly complete including cutting, chasing the surface and then making good the same to match with the existing in CM 1:6 complete all as specified and directed.

All as per item No124 above but one light point controlled by two way switches all as specified and directed.

All as per item No 124 above but socket outlet point 3 pin 5 Amp 230 volt flush type on same board all as specified and directed

All as per item No 124 here in before but for one socket point out let 3 pin 5 Amp on independent board all as specified and directed

All as per item No 124 here in before but for one power point 3 pin 15 Amp with 4.00 sqmm PVCinsulated FRLSH copper conductor and 4.00 sqmm PVC insulated FRLSH copper conductor as earth continuity conductor all as specified and directed

S&F modular switches one way 6 Amps single pole 240 V all as specified and directed

S&F modular switches two way 6 Amps single pole 240 V all as specified and directed

S&F socket modular type 2 in 1, 2/3 pin combined 6 Amps flush type 240 V.

S&F modular switches one way 16 Amps single pole 240 V all as specified and directed

S&F socket modular type 2 in 1,6/16 Amps flush type 240 V

S&F regulator for ceiling fan modular electronic step type 120watt- 2module suitable for 1200/1400mm ceiling fan complete, all as specified and directed

S&F ceiling rose surface type bakelite 65x50mm two to three terminal 230V complete all as specified and directed

S&F for replacement of old fluroscent light to LED light fitting recessed mounted 2'x2 ' of capacity 36 Watt including existing tube light taking out complete with all connected accessories.all as specified and directed

S&F in replacement of old fluroscent light to LED light fitting surface mounted 2'x2 ' of capacity 36Watt including existing tube light taking out complete with all connected accessories. all as specified and directed

S&F in replacement of old flurorescent light tube with LED Tube rod of 20 Watt including supply and fixing 20 watt Aluminium extructed LED integrated Batten with aluminium heat sink & polycarbonate diffuser having high efficency suitable for installation in existing T5/T8 tubelight taking out including necessary electric connection complete all as specified and directed. all as specified and directed.

S&F in replacement of old flurorescent light tube with LED Tube rod of 10 Watt including supply and fixing 10 watt Aluminium extructed LED integrated Batten with aluminium heat sink & polycarbonate diffuser having high efficency suitable for installation in existing T5/T8 tubelight taking out including necessary electric connection complete all as specified and directed.

S&F in replacement of old MH light with Powder coated pressure die cast aluminium SMD LED street light with heat resistant toughened glass of capacity 70 Watt including taking down old unserviceable and suitable bracket for fixing of street light of pressure die cast aluminium housing with high power led as lighting source and lens embedded PC cover having toP opening seperate driver compartment with iP66 protection and impact resistance of IK07. complete all as directed

S&F telephone socket jack RJ 11 With shutter all as specified and directed

M&L for Taking down of ceiling fan of size 1200/1400MM, metal body type, single phase, 240 volts AC kept in MES Custody and hanging same after painting and connecting and testing , complete all as specified and directed

M&L for Taking down of Wall/Exhaust fan of any size, metal body type, single phase, 240 volts AC kept in MES Custody andhanging same after painting and connecting and testing , complete all as specified and directed.

M&L in replacement wiring for circuit/submain wiring along with earth wire with the 2x10.sqmm+ 1X 10 sq mm earth wire of FRLSH PVC insulated multistranded copper conductor single core cable in and including PVC conduit pipe not less than 25 mm external dia medium grade including all accessories complete all as required or all as specified and as directed.

M&L in replacement wiring for circuit/submain wiring along with earth wire with the 2x4.00 sqmm+ 1X 4.00 sq mm earth wire of FRLSH PVC insulated multistranded copper conductor single core cable in and including conduit pipe 25 mm external dia medium grade including all accessories complete all as required or all as specified and as directed.

Supply and fixing in replacement of old MCCBs VTP&N distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, IP 43 protection suitable for MCCB for capacity 125 Amp, 16 KA, Incomer 12ways 415 Volts double door vertical type CRCA sheet with busbar rating 200 Amps Adjustable thermal (70% to 100%) & Fixed magnetic setting type complete all as specified

Supply and fixing in replacement of old MCCBs VTP&N distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, IP 43 protection suitable for MCCB for capacity 125 Amp, 16 KA, Incomer 8ways 415 Volts double door vertical type CRCA sheet with busbar rating 200 Amps Adjustable thermal (70% to 100%) & Fixed magnetic setting type complete all as specified

Supply and fixing in replacement of MCB distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, SPN 12 way. 230 volts with bus bar rating 100 Amps, dust and vermin proof and IP 43 - IK 09 protection suitable for incorporation of MCB, including grouting in the wall, cutting & chasing etc complete all as specified.

Supply and fixing in replacement of MCB distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, SPN 08 way. 230 volts with bus bar rating 100 Amps, dust and vermin proof and IP 43 - IK 09 protection suitable for incorporation of MCB, including grouting in the wall, cutting & chasing etc complete all as specified.

S&F in replacement MCB 6 Amp to 32 Amp sp 10 KA C' series complete all as specified and directed.

Supply and fix inreplacement MCCB four pole 415 volts 50 Hz ,125 Amps, with rupturing capacity 25 KA complete all as specified and as directed including taking down old unserviceable MCCB .

Supply and fix inreplacement MCCB four pole 415 volts 50 Hz ,100Amps, with rupturing capacity 25 KA complete all as specified and as directed including taking down old unserviceable MCCB .

Supply and fix inreplacement MCB SPN 230 volts 50 Hz , 63 Amps, with rupturing capacity 10 KA complete all as specified and as directed including taking down old unserviceable MCB .

S&F in replacement MCB TP upto 63Amp sp 10 KA C' series complete all as specified

S & F inreplacement of single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps including taking down old unserviceable old single pole and neutral with a two pin and earth plug and socket. complete all as specified and as directed.

S&F sheet metal enclosure with socket plug top and MCBs Triple pole and earth enclosure with 3 pin and earth plug with socket complete with one Triple pole MCB 63 Amps complete all as specified and directed .

Earthing with Galvanised iron earth plate electrode 600 x 600 & 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to galvanised earth lead wire 4 mm dia connected to earth plate electrode by means of GI nuts, bolts & washers earth wire protected with & including 20 mm dia medium grade ISI marked GI pipe not less than 7.5 metre long all as shown in electrical plate No 3 of MES Schedule Part I, with & including; PCC 1:3:6 type C1 pit with cover of RCC 1:2:4 B1 reinforced with welded steel wire fabric not less than 4 Kg per Sqm watering arrangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with mixture of common salt & charcoal,including all necessary excavation and earth works in any type of soil, including test point, testing & commissioning, all as specified and directed.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm galvanised iron wire all as specified and directed.

S&F DLP U PVC trunking system Plastic adoptable type 150x50mm with two compartment duly covered installed with suitable support joints including all accessories complete all as specified and as directed.

S & F fire alarm control panel complying with BS EN 54 4 loop panel with 99 detectors and 99 modulers & upto 200 detcetors and modules (per each loop) all as specified and directed.

S&F detectors complying with and type certified to EN-45 addressable type smoke detector Photeelectric /optical with base with self built intelligence as per iS 11360 all as specified and directed

S&F detectors Complying with and type certified to EN-45 addressable type heat detector with basse with rate of rise cum fixed temperature as per IS: 2175 all as specified and directed

Supply, laying in repair of multi stranded copper conductor PVC insulated and unsheathed FRLSH cable 2 core 1.5 sqmm ISI marked complete all as specified and directed.

Supply, laying of multi stranded copper conductor PVC insulated and unsheathed FRLSH cable 4 core 1.5 sqmm ISI marked complete all as specifid and directed.

Supply and Fix addressable manual call point resettable type all as specified and directed

S&F fire alarm sounders /sirens electronic type horizontal singel stage continuous normal operation for atleast 50 minutes with south level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of + 5 DB 1000m range .

Supply, installation, testing and commissioning of addressable control module required for various output to other systems like signal, access control etc complete all as specified and directed. The control module should EN-54/LPCB/UL/VDS

Supply and fixing of response indicator complete all as specifed and directed.

Supply, installation, testing and commisioning of 120 watt amplifier all as specified and directed.

Supply, installation, testing and commisioning of 6 watt ceiling / wall speaker all as specified and directed

Supply, installation, testing and commisioning of microphone for announcement.

Supply and laying of public address wire of 2 core complete all as specified and directed

Supply, installation, testing and commissioning of single master and 8 way slave for talk complete all as specified and directed .

M&L for fixing of steel conduit of size 20 mm on wall/ceiling with clamps, screw and all connected items all as directed.

M&L for fixing of steel conduit of size 25 mm on wall/ceiling with clamps, screw and all connected items all as directed.

Sree Ram Enterprises

V M CONSTRUCTION