COMPERHENSIVE B/R MAINT FOR VARIOUS BLDGS IN THE AREA OF JUTOGH CANTT UNDER GE (I) JUTOGH

Amount

Dismantling of floor hearth or wall tiling/stone slabe incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base of flooring complete all as specified and directed.

M&L for PCC 1:3:6, type C-2, 75mm thick, using 40mm graded curshed stone aggregate as in plinth protection, complete all as specified and directed.

M&L for coloured chequred cement concrete tiles laquared fish (30cmx30cmx25mm thick) in grey cement and with pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for joint free Non Skid glazed ceramic tiles (coloured) 400x400x 7 to 8mm thick (square/rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including 15 mm thick screed bed CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles glossy finish joint free in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm, 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and incl 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured cladding/elevation tiles joint free in vertical surfaces of size 350x250x7-8mm/ 450x300-350x7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4, complete all as specified and directed.

M&L for vitrified tiles light shade, thickenss 8 to10mm (square/ rectangular) polished area of each tiles exceeding 0.36 sqm in floors, set and jointed in neat cement slurry and pointed in white or colored cement to match with the tiles incl. 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.

All as per Srl item No 9.00 above but for vitrified tiles on vertical surfaces such as skirting set and jointed in neat cement slurry and pointed in white or colored cement to match with the tiles incl. rendering 15mm thick in CM 1:3 on brick work or concrete surfaces etc. complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons, cooking platform etc., complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including 20mm thick screed bed with cement mortar 1:6, complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 18-20mm thick in skirting/dados and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including 10mm thick backing coat in CM 1:4, complete all as specified and directed.

M&L for 16-18 mm thick granite (of any type) work table rubbed and polished) in pillar/vertical surface, cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including 20 mm screed bed in CM 1:6, complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S & F 1.2mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, homogenious laid with approved rubber based adhesive in floors complete all as specified and as directed (including dismantling of old PVC sheet from floor and removing from site), complete all as specified and directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided, complete all as specified and directed.

M&L for RCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in chajja repairs at any height including providing and erecting at site conventional steel double scaffolding to reach at any height/any place of work on the external façade of the building including approaches, extensions, working platforms, ladders, lifting tackle for men and materials etc all complete, inclusive of covering by hessian cloth or tarpaulins, dismantling and taking away all materials after the completion of praposed work etc., complete all as specified and directed.

M&L for formwork to flat rough finished surface of concrete for chullah hoods, chajjas, troughs and similar items including edges any height complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in columns/ beams/ slab, landings and in shelves and the like complete all as specified and directed.

M&L for formwork flat rough finished surfaces of concrete to soffits of suspended slabs, roof slabs, landings and similar work complete all as specified and directed.

M&L for form work to edges of concrete flats, openings, floors & roofs and sides of RCC/ PCC bands in walls and similar work exceeding 5cm but not exceeding 10cm wide for rough finished surfaces of concrete, complete all as specified and directed.

S&F TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally hooking end and binding with MS wire annealed not less than 0.9mm dia, complete all as specified and directed.

Taking down cement or cement lime plaster, of any description incl tiling etc., complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on brick work or concrete surfaces finished even and smooth, complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:3) on brick work or concrete surfaces in ceilling finished even and smooth, complete all as specified and directed.

M&L for plastering work 15 mm thick on fair surfaces of brickwork or concrete surfaces (1:4) finished even and fair (without using extra cement) any height (Ground Floor to 3rd Floor) including necessary scaffolding and T&P required to complete the work complete all as specified and directed.

M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over a one coat of birla white putty 1-2mm thick on walls, complete all as specified and directed.

M&L for prepartion of newly plastered surface of wall applying two coat of weather proof anti fungal exterier emulsion paint on external surfaces including a coat of alkali resistant priming paint of any height (G Floor to 3rd Floor) including necessary scaffolding and T&P required to complete the work, complete all as specified and directed.

M&L for complete removal of existing treatment of plastered or unplastered old decorated surface walls by brooming down and applying two coat of weather proof anti fungal exterier emulsion paint on external surfaces including a coat of alkali resistant priming paint at any height of building / tower, complete all as specified and directed.

Dismantling ceiling boards (fibre, plup insulation etc) or insulation boards/ slabs/ blankets any thickness including cover fillets, complete all as specified and directed.

M&L for anodised aluminium snap grid frame work with hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified for false ceiling, complete all as specified and directed.

M&L for providing and fixing Gypsum Board tiles PVC laminated (0.7 mm textured rigid poly vinyl film) of size 600 x 600mm, 9-12 mm thick in ceiling fixed with screw a timber/ GI/ Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.

Taking down wall panelling and similar work complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame, complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height complete all as specified and directed.

M & L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan to any radius in half brick thick wall built, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed.

S&F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap fixed with with coach screws and washers, in roofs, walls etc. with grade of Zinc coating 120 GSM complete all as specified and directed.

S&F 0.63 mm thick plain galvanized mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of Zinc coating 120 GSM, bent to shape as required, fixed with coach screws and washers in roofs and wall etc, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading/ to wall,eaves board etc fixed with self tapping screws as specified including necessary scoffolding work, complete all as specified and directed.

S&F 4 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer/ self tapping screw complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

Dismantling timber scantlings ,framed/unframed work of size 40 sqcm and over in section ,in any position in any position with nails etc complete all as specified and directed.

S&F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, anfle, channel or flat sections) including distance pieces cleats Fe 410-W(Gde-E- 250) quality-A etc, complete all as specified and directed.

Erection and refixing only (Exept steel) roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam,tee, anfle, channel or flat sections) including distance pieces cleats Fe 410-W(Gde-E- 250) quality-A etc, complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or wooded bead/aluminium clip built in squares exceeding 0.5 sq.m in each pane, at any storey /height, complete all as specified and directed.

S&F sheet glass 3.00 mm thick ordinary quality and glazing with oil putty or wooded bead built in squares not exceeding 0.5 sq.m in each pane at any storey height, complete all as specified and directed.

S&F sheet glass 4.00 mm thick figured glass pin headed type and glazing with oil putty or wooded bead built in squares not exceeding 0.5 sq.m in each pane, complete all as specified.

Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm each and n exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and refixing in the same opening after repairs complete all as specified and directed.

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan as per and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: iM.S. hold fast/ lugsor SS dash fasteners shall be paid for separately. ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. specification complete all as specified and directed by Engr-in-charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S S screws shall be paid separately.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle, tower bolt and steel peg stay complete with glazing bars complete all as specified and directed.

All as per Srl Item No 62.00 above but for steel window or ventilator, fixed type, with glazing bars, complete all as specified and directed. Note for item No. 62 & 63: Glass required for fixing in window and ventilator will be measured and paid for separately under respective item of this schedule. However the quoted rate deemed to include for necessary fixing of glass

S&F Aluminium anodised powder coated sliding type three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass, size of frame 93.00 x 31.75 x 1.3 mm thick for top and sides, 93.00 x 31.75 x 1.3 mm thick, bottom and shutter frame 38 x 18 x 1.5 mm thick., Aluminium grill 6 mm dia design No DG-102 make DEDO grill or design No A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts, stopper etc complete all as specified and directed.

S&F powder coated aluminium sec ( frame/shutter/partion) for doors, windows, ventilators,partition of powder coating minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

S&F aluminum section powder coated (powder coating color/shade as approved by GE) of colour as approved door with frame and shutters partially gauze and PVC composite board 5mm thick fixed with aluminium clip section door section of aluminium door shutter as under complete all as specified and directed. (I) Frame 100x40x2mm (ii) shutter style 85x44.45x3mm thick section (iii) Top rail 95.25 x44.45x1.7mm thick (iv) middle rail 83.50x44.75x1.7mm thick (v) Bottom rail 114.30X44.15X1.7 thick section (vi) Glazing clip 0.7mm thick (vii) 2 Nos Handle Powder coated Aluminium 200mm long as approved (viii) Tower bolt 9.90mm dia and 200mm long (ix) Mortice lock 100MM 7 LIVER make Godreg (x) Hold fast aluminium 100mm long (xi) 1 Nos hydraulic door closer each shutters (xii) Reinforced with 2 No 10mm dia MS bar with bolt complete on top and bottom rail of door.

S&F sheet glass 5.5 mm thick tinted glass in square exc 0.5 sqm in each pain complete all as specified and directed.

Framed work as in doors frame/ chowkats or gates/ Grill of angle or other section with gusset plates , rails , braces etc complete drilled for fixing of steel sheeting etc Fe 410 -W (Gde- E- 250) quality-A, complete all as specified and directed.

S&F 3-4 mm thick Aluminium partition sheet fixed to aluminium frame work using anodized aluminium bead,rubber beading and packing,in panels exc .5 sqm in each pane complete all as specified and directed.

S&F 35mm thick IInd class hard wood plain framed, panelled shutters (any numbers of panels), with panels of timbers flat on bith sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed.

S&F glazed and skeleton shutters 35mm thick 2nd class Hard wood open rebated and prepared to receive glass, gauge etc. edges of framaing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sized of members of shutter with three number of pannels complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples fixed with wooden beading complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples fixed with wooden beading complete all as specified and directed.

Dismantling timber scantlings framed work in fillets, frame work of cup board, rails, posts rafters, purlins, etc under 40 sq cm in section in any position with nails etc complete all as specified and directed.

M&L for plain fillets of second class hard wood, square or rectangular in section, clean sawn, secured with nails or brads; sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm, complete all as specified and directed.

Dismantling boarding any description, fixed in any position with nails for cupboards complete all as specified and directed.

M&L for Second class hard wood clean sawn boarding 25mm thick, planed one side, with butt joints in ceilings/roof at any height, in any situation except flooring & skirting complete all as specified and directed.

M&L for 2nd class hard wood in scantlings, rafter, post and purline, clean sawn in framed work including and repair to replace old and decayed timber (including piecing, scarfing etc of old and new timber if required and removing defective portions to store etc complete all as specified and directed.

M&L for Block board 18/19mm thick, grade 2 quality, "interior grade" commercial type block boards, grade 2 quality, interior grade, commercial type, fixed with screws in cup board shutter etc or to timber frame work, complete all as specified and directed.

S&F 0.90mm thick decorative laminated sheet of surface finish, colour and pattern as approved fixed with adhesive as per manufacture instruction, complete all as specified and directed.

S&F continous piano hinges mild steel bright finish or electro galvanised with open flap width 30mm, fixed with screw complete all as specified and directed.

S&F 75mm brass handle, cast type, polished bright, complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and directed.

S&F 2 lever brass, cupboard lock, grade 1, size 50mm, complete all as specified and directed.

M&L for preparation of new wooden surfaces not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long in repair complete all as specified and directed.

S&F 300mm Mild Steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F aluminium extruded alloy handles fabricated type anodised 150mm long complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel powder coated of 100mm size, complete all as specified and directed.

S&F Butt hinges 75mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long, complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long, complete in repair all as specified and directed.

S&F floor door stoppers 140mm of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floors, complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium body, designation No.2, universal type, suitable for door shutters of weight between 36 to 60 kg, complete all as specified and directed.

Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed.

Taking up or down 20 bore, steel water tubing & connections complete all as specified and directed.

Refixing old steel tubing 15mm dia and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed.

Refixing old steel tubing 20mm dia and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 15mm bore complete all as specified and directed.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 20mm bore complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve, complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve, complete all as specified and directed.

S&F in repair 20mm ball valves high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screw for iron pipe mini weight for 210 gms complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position of cap exc. 250 Ltr n exc. 500 ltr complete as specified and directed.

S&F in repair 21-22 inch dia galvanised mild steel pan mortar (Tasla/ghamela) not less than 1mm thick with for 04 Nos bolt of 5-6mm dia with 8 Nos nut bolt with 8 Nos washer including fixing on water storage tank as tank cover complete as specified and directed.

M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 250 Ltr and nexc. 500 ltr complete as specified and directed. Note : Any damage to float valve, pipe etc. shall be made good by the contractor.

M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 500 Ltr and nexc. 1000 ltr complete as specified and directed. Note : Any damage to float valve, pipe etc. shall be made good by the contractor.

S&F in repair 20mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for Iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair 15 mm dia Angle/stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, complete all as specified and directed.

S&F in repair 15mm bore concealed stop valve fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for unions pipe, complete all as specified and directed.

S&F in repair 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type fixed, complete all as specified and directed.

S&F in repair 15mm brass CP wall mixer for mixing hot and cold water with hand shower complete all as specified and directed.

S&F in repair 15mm brass CP wash hand basin/ kitchen sink mixer for mixing hot and cold water complete all as specified and directed.

S&F in repair 60cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing, complete all as specified and directed.

S&F in repair CP toilet paper holder with flap cover fixing with all necessary arrangementsscres etc., complete all as specified and directed.

S&F in repair vitreous China wash basin with pedastal super white/ colour of size 560x475mm including all fittings complete, decorative type, complete all as specified and directed.

S&F in repair Wash basins, vitreou china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length, complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, complete all as specified and directed.

S&F in repair 15mm size PVC connection pipe with CP nuts of length 600mm long, complete all as specified and directed.

S&F in repair 32mm dia PVC waste pipe for wash hand basin and kitchen sink of length 900mm long with PTMT nuts complete all as specified and directed.

S&F in repair EWC vitreous china wash down water closet pan padestal pattern white with complete fitting including P Trap/ S Trap and fixing with brass screw, complete all as specified and directed.

S&F in repair plastic water closet seat cover white / coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair vitreous china squatting pan, orrissa, pattern, size 580 x 440 mm white with integral foot rest including trap set and including concrete complete including making good to floor etc excluding flushing cistern and flush pipe, complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 Ltr capacity valveless symphonic action type white as approved with ball valve flat back & handle including brackets, complete all as specified and directed.

S&F in repair 5mm thick looking mirror with 6mm thick back ply wood and wooden frame complete including plugging on wall and fixed, complete all as specified and directed.

S&F in repair PVC bath cabinet with mirror 350x450mm, complete all as specified and directed.

S&F in repair stainless steel 25mm dia drapery rods for curtains incl stainless steel decorative end knobs and brackets (wall to wall or flush to wall) for securing curtain rod complete all as specified and directed.

S&F in repair stainless steel plate rack (utencil rack for kitchen of size 750 x 600 x 250mm and min 0.80 to 1.00 mm thick fixed with stainless steel screw and rawl plug complete all as specified and directed.

S & F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastecoupling/waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mmx330mmx160mm, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

M&L for mild steel sheet eaves gutters, 1mm thick 150mm dia galvanised class 3, half roundwith rounded edges, complete all as specified and directed.

M&L two coats of synthetic enamel paint on new or previosly untreated surface over a coat of red oxide (including preparation) on eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured overbends, branches etc.), complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including camps as required, complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including camps as required, complete all as specified and directed .

S&F 75mm dia PVC (SWR) bends with oval accesse door with rubber ring joints fixed as required complete all as specified and directed.

S&F 75mm dia PVC (SWR) junction double, (single T), equal or un equal with oval accesse door including jointing with solvant cement as required, complete all as specified and directed.

S&F 110mm dia PVC (SWR) junction double, (single T), equal or un equal with oval accesse door including jointing with solvant cement as required, complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed.

Demolition of PCC in roof /sunken any thickness whether full thickness removed or part thereof including concrete, plaster & leaping complete all as specified and directed.

Rendering/ Screed bed 15mm thick in CM 1:3 with WPC (Sunken slab), complete all as specified and directed.

M&L for preparation of plaster surfaces /RCC roof surfaces and applying one coat of bituminous primer @0.30 Ltr/sqm, complete all as specified and directed.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning surfaces etc complete as in sunken portion, complete all as specified and directed.

M&L for PCC 1:5:10, type E-2, using 40mm graded crushed stone aggregate as in filling and mass aggregate complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for screed bed 15mm thick in cement mortar 1:4 on concrete surfaces finished even and fair without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions on existing surfaces complete all as specified and directed.

M&L for liquid water proofing compound, complete all as specified and directed.

M&L for cleaning of roof slab surfaces including sweeping clean & washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed. (a) M&L preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.3 ltr/Sqm . (b) M&L applying blown type bitumen @1.20Kg/Sqm of grade 85/25. (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required all complete all as specified and directed . (d) Applying two coats of aluminium paint @ 0.2 kg/sqm complete all as directed.

S&F 5 mm thick plain Poly carbonate translucent sheeting fixed with self tapping screw foe wall clading etc, incl dismantling complete all as specified and directed.

S&F in repair pre-painted galvalume aluminium zinc coating GI based tile profile steel sheet 0.50 mm thick of colour approved by Engr-in-charge having tensile strength of 550 Mpa as in Chajja/roof covering/clading to wall, fixed with self tapping screws and making it good by Cutting grooves in brick wall, 75mm wide and 25mm deep and shaping horizontal face of groove with cement mortar 1:3 and applying Pidilite roofseal or equivalent as per manufacturers instructions and making it good to match existing surface including necessary scoffolding, complete all as specified and directed.

S&F for structural steel work in hollow tubular square and rectangular section trusses, purlins and bracing supports etc including any special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of ceiling including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots including necessary putty work on holes/cracks and applying one coat of white wash complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of ceiling including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots including necessary putty work on holes/cracks and applying one coat of oil bound distemper, complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots including necessary putty work on holes/cracks and applying two coats of white wash, complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots including necessary putty work on holes/cracks and applying one coat of oil bound distemper (white/Approved shade) complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots including necessary putty work on holes/cracks and applying two coats of oil bound distemper (white/Approved shade) complete all as specified and directed.

M&L for old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint of white / approved shade complete all as specified and directed.

Complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped with wall care putty (3mm thick) and preparation of surfaces for further treatment with primer and applying two coats of oil bound distemper (white/ Approved shade) complete all as specified and directed .

M/S J.S.ENTERPRISES (BID ID -3093368)

NSK TRADER (BID ID -3085295)

M/S Meera Builders (BID ID -3091305)