SPECIAL REPAIRS TO 02 NOs. BATHROOMS IN GIRLS AREA, 01 TOILET BLOCK IN PL LINE AND 01 TOILET BLOCK NEAR NURSERY AND TO BLDG NO T-349 AT DGNCC CAMP IN THE AREA OF AGE BR III UNDER GE EAST DELHI CANTT-10

Amount

Demolition of cement concrete, unreinforced, in ground floors and pavings not exceeding 15cm thickness below or above ground level, complete all as specified and as directed.

Taking down cement plaster from brick or concrete surfaces including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each and removing from site, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each and removing from site, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr deep and getting out complete in soft/loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well raming in layers not exceeding 25cms thick complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 50mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and as directed.

Plain cement concrete 1:3:6 type C- 1 using 20mm graded crushed stone aggregate as in surface channels and drains. complete all as specified and directed.

Brick work with sub class “B” bricks straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:6 using old size bricks, including demolition of brick work built in cement mortar, complete all as specified and as directed.

18-20mm thick Granite stone slab (table rubbed and polished) in steps, shelves, and the like not less than 1Sqm (in one piece), laid over 20mm thick layer of cement mortar 1:3 after rougheniung of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including moulding of edges, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS squqre tube. complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.

100mm size butt hinges (medium weight) colled rolled mild steel fixed with welding, complete all as specified and as directed.

Extruded aluminium alloy handles cast type anodised of size 150mm size, complete all as specified and as directed.

Extruded aluminium anodised barrel tower bolt of extruded section 150mm size, complete all as specified and as directed.

Curtain rods 25mm dia stainless steel with fixing brackets, stops, flanges etc, fixed in repairs, complete all as specified and as directed.

Aluminum alloy powder coated (50 micron) anodized door frame of section 100mm x 44mm x 2mm thick, door shutter of aluminum section of size 85mm x 44mm x 2mm thick, top rail and both stylesof size 100mm x 44mm x 2mm thick,lock rail and bottom rail of size 115mm x 44mm x mm thick including aluminum anodized snap beading and rubber packing,& 5.5mm thick frosted designer glass (as approved by GE), duly fitted with 100mm long aluminum butt hinges- 04 Nos. to each leaf, 200mm size aluminium tower bolt, 200mm long fancy type Aluminium handle- 02 Nos on each leaf, 4 lever brass 100 mm size mortice lock, & double action floor door spring heavy duty suitable for 1mtr wide shutter for each leaf, complete all as specified and directed.

Anodized aluminum alloy powder coated standard hollow section for window three tracks including aluminum frame/chowkhat with following specifications including anodized aluminum snap beading, channels, 5mm thick tinted glass, glazing clips joint cleats, rubber gasket etc and other accessories complete all as specified and directed:- (a) Frame of section:- 83.50mm x 44.45mm x 1.60mm thickness (b) Sliding window section (Channel):- 61.85mm x 31.75mm x 1.2mm thickness (c) Sliding shutters of section:- 40mm x 18mm of 1.20mm thickness with locking arrangement Note:- (i) The rates also including the cost of cutting, waste and making good disturbed surface matching with existing surface and finish as directed. (ii) Minimum thickness of powder coating shall be 50micron, complete all as specified and as directed.

Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading fixed with screws etc., complete all as specified and as directed.

Steel ventilators fixed type with glazing bars dovetailed or welded, complete all as specified and as directed.

Mild steel framed work as in doors (as in chowkats) or gates of angle or other section with gusset plates, rails, braces etc., exclusive of steel sheeting or other covering, hanging or fastening and fixing complete conforming to Gde Fe-410-0 or Fe-310-0 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and as directed.

Rolled mild steel Fe-410w (Gde-E-250) quality 'B' Roof trusses (framed), trussed, purlins, crane gantries , rails and fastening and havy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc, fixed in repairs, complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including dismantling of old AC corrugated/semicorrugated sheets, complete all as specified and as directed.

Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, including dismantling of old AC corrugated/semicorrugated sheets, complete all as specified and as directed.

Applying evenly a coat of bituminous primer conforming to IS- 3384 @ 0.4Ltr/Sqm. Over the primed surface, apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area. Applying APP based polymeric mambrane minimum weight 3.6kg/Sqm and of minimum thickness 3mm, reiforced with polyster non woven fabric ( weight not less than 150gm/Sqm ). APP membrane will be laid by torching overlaps with a propane or butane gas torch and laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen. Over the APP membrane apply a coat of cold emulsion bitumen primer @ 0.5 Kg/Sqm. complete all as specified and as directed.

False ceiling with 4mm thick desiner 'E' Board of size 595mm x 595mm (Make:Everest Ltd or Charminar) fixed over snap grid of GI powder coated inverted Tee or 'L' section suspended from ceiling with butterfly clip & hold down clip or 2-3 mm thick GI wire tie with ceiling/trusses/purlins etc with suitable arrangement(at any height) including taking down old ceiling board any type and any size, complete all as specified and as directed. (a) Main runner/ Cross tee size 29mm x 24.7mm x 0.8mm. (b) Wall angle of size 22.2mm x 22.2mm x 0.65mm. (c) Size of grid 600mm x 600mm. (d) Two coats oil bound distemper one side of board. (e) Powder coating on exposed side of tee/angle.

Vibro compacted Precast concrete interlocking paver blocks, factory made,any shape and size conforming to IS- 15658- 2006 of 60mm thick, M-35 Grade set, jointed in neat cement slurry and pointed flush with grey cement mixed with pigments to match colour of blocks in floors laid over 30mm thick sand cushioning, complete all as specified and as directed.

50mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate, as in sub base to receive topping layer finished even and rough, complete all as specified and as directed.

75 MM thick plain Cement Concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and fair at top without using extra cement and providing joints 40mm deep and 12 mm wide in plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as and as directed.

Vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles n. exc 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 including dismantling of old tiles, complete all as specified and as directed.

Vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles n exc 1.00 Sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including backing coat of 10mm thick CM 1:4 on brick masonry/concrete surfaces finished even to receive tiles and dismantling of old tiles, complete all as specified and as directed.

Anti skid ceramic coloured floor tiles 7-8mm thick, area of each tiles 4exceeding 0.11 Sqm but not exceeding 0.18Sqm as in floors, set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4 including taking down old tiles and backing layer, complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surface 300mm x 450mm x 7mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in cement mortar 1:4 including taking down old tiles and backing layer, complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surface 600mm x 300mm x 7mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in cement mortar 1:4 including taking down old tiles and backing layer, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 5mm thick on fair faces of concrete surfaces as in ceilings in cement mortar 1:3 finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and as directed.

Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including cuttng grooves, complete all as specified and as directed by Engr-in-Charge.

Preparing newly plastered/old treated surfaces of walls and applying two coats of oil bound distemper, complete all as specified and as directed.

Preparing newly plastered/old treated surfaces of walls and applying two coats of plastic emulsion paint, complete all as specified and as directed.

Preparing newly plastered surfaces of wall and applying two exterior acrylic emulsion weather shield paint over a layerof Birla White/JK White wall cre putty, complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description exceeding 10 cm width or girth over a coat of red oxide, complete all as specified and as directed.

Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, including taking up or down old GI Tubing and removing off the site, complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, including taking up or down old GI Tubing and removing off the site, complete all as specified and as directed.

40mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position, including taking down old OH PVC water storage tank and removing off the site, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 2000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position, including taking down old OH PVC water storage tank and removing off the site, complete all as specified and as directed.

Counter type vitreous chinaware wash hand basin (WHB) white, of size 595mm x 440mm, including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc , fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. KUS-WHT-35901 or equivalent in Somany/Cera/Hindware).

Water closet squatt pan (Orissa Pattern) complete including provision of lime concrete bedding Orissa pattern size 580mm x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc., fixed in repairs, complete all as specified and as directed

PVC valve less syphonic action type flushing cistern, low level, 10 litres capacity including flush pipe PVC connection, float valve, PVC handle/button and connections complete including taking down old unserviceable flushing cistern any type, fixed in repairs, complete all as specified and as directed.

PVC connection 15mm dia and 600mm long with 2 Nos PTMT nuts, fixed in repairs, complete all as specified and as directed.

15mm bore pillar tap standard of PTMT any colour high pressure screwed for iron pipe, fixed in repairs, (Minimum weight 15mm-110gms), complete all as specified and as directed.

15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe, fixed in repairs, (Minimum weight 15mm-90gms), complete all as specified and as directed.

15mm bore angle cock standard of PTMT any colour high pressure screwed for iron pipe, fixed in repairs, (Minimum weight 15mm-90gms), complete all as specified and as directed.

15mm bore Push tap any colour high pressure of PTMT screwed for iron pipe, fixed in repairs, (Minimum weight 15mm-47gms), complete all as specified and as directed.

15mm bore any colour PTMT shower rose, round type of 125mm size screwed for iron pipe, fixed in repairs, (Minimum weight 40gms), complete all as specified and as directed.

15mm bore, fancy type two way bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and as directed. complete all as specified and as directed by the Engineer-in-Charge. (Make : Jaquar Cat Part No. KUP-35041PM or equivalent in Somany/Cera/Hindware).

20mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for brass ferrule, fixed in repairs, complete all as specified and as directed.

15mm bore brass chromium plated basin mixer of mixing 'Hot' and 'Cold' water with long shank, screwed down for iron pipe, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. OPP-15433M or equivalent in Somany/Cera/Hindware).

Health faucet with 1.00mtr long CP flexible pipe and brass Chromium plated nuts, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. ALD-CHR-593N or equivalent in Somany/Cera/Hindware).

15mm bore brass chromium plated sink mixer of mixing 'Hot' and 'Cold' water with long shank, screwed down for iron pipe, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. ORP-101738PM or equivalent in Somany/Cera/Hindware).

Wall Mixer with connector for Hand Shower Arrangement with Connecting Legs, Wall Flanges & Wall Bracket for Hand Shower fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat No OPP-15125PM or equivalent in Somany/Cera/Hindware) & Hand Shower Hand Shower ø105mm Round Shape multi Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System, (Make : Jaquar Cat No HSH-1721 or equivalent in Somany/Cera/Hindware) and over head shower 200x200

Chromium plated tubular towel rail 'D' type 20mm dia 600 mm long, fixed with brass screws, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. ACN-1111NM or equivalent in Somany/Cera/Hindware).

Chromium plated tubular towel ring, fixed with brass screws, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. ACN-1121BN or equivalent in Somany/Cera/Hindware).

Soap dish Fancy type CP, fixed to wall with PVC plugs with chromium plated brass screws, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. ACN-1131N or equivalent in Somany/Cera/Hindware).

Toilet paper holder with stainless steel flap, fixed to wall with PVC plugs with chromium plated brass screws, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. APN-35751P or equivalent in Somany/Cera/Hindware).

Vitreous china Urinal half stall type, white, including waste pipe, fixed in repairs, complete all as specified and as directed.

Urinal separator of Vitreous china including all necessary fittings for fixing to walls, fixed in repairs, complete all as specified and as directed.

Urinal spreader of PTMT of any colour for fixing with 15mm dia pipe, fixed in repairs, complete all as specified and as directed.

Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. KUP-11171N or equivalent in Somany/Cera/Hindware).

Precast SFRC square or rectangular manhole covers 75 mm thick with frame medium duty conforming to IS-12592 including necessary hold fasts and hooks, complete all as specified and as directed.

PVC 110mm bore (SWR) pipes single socketed, in any length with rubber ring joints, flaid in trenches or in floors, fixed in repairs, complete all as specified and as directed.

PVC 75mm bore (SWR) pipes single socketed, in any length with rubber ring joints, flaid in trenches or in floors, fixed in repairs, complete all as specified and as directed.

PVC (SWR) bend of 110mm bore any radius, complete all as specified and as directed.

PVC (SWR) single Junction (Single Y) of 110mm bore, complete all as specified and as directed.

PVC floor/nahani trap 75mm bore, with grating including jointing in solvent cement to waste pipe, complete all as specified and as directed.

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, complete all as specified and as directed.

Point wiring complete with 1.5 Sqmm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and including Metal flush box of suitable size 3mm thick hylem sheet cover duly cut for fixing modular switches/sockets/fan regulator etc, and making good surface as original by plastering, whitewash/colour and distemper etc complete all as specified and as directed for the following :- one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

All as per description of Srl item No. 80 here-in-before but for one socket outlet 5/6 Amps on same board.

Switch piano flush type, single pole, one way, 5/6 Amps, complete all as specified and as directed.

Socket two-in-one, 5 pin, 5/6 Amp universal type, complete all as specified and as directed.

Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc., complete all as specified and as directed.

Bell Ding Dong AC 230 volts, single pole, fixed in repairs, complete all as specified and as directed.

LED mirror light fitting 10/12 watt, cool/warm white as per site requirement and making all electric connections, fixed in repairs, complete all as specified and as directed.

Wall mounting tube light fitting, 22 watt including making all electric connections using PVC Sheathed copper conductor flexible cable, fixed in repairs, complete all as specified and as directed.

LED security light luminaire 45 watt pressure die cast aluminium housing with heat resistance toughned glass and IP- 66 protection with and including driver/transformer and including connector, complete all as specified and as directed.

MCB DB confirming to IP 43 - IK 09 with double door, SPN 04 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces, complete all as specified and as directed.

MCB DB confirming to IP 43 - IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces, complete all as specified and as directed.

MCB C Curve type, 10 kA, 10 to 32Amp, Single Pole with over load and short circuit protection, complete all as specified and as directed.

MCB C Curve type, 10 kA, of 32 to 40Amp capacity, Single Pole and Neutral, complete all as specified and as directed.

NOTE:- (Applicable to Srl items 82 to 92 only) Items shall be of Make : Havells brand name REO or equivalent brand name in Great White and SSK, irrespective of whatever specified elsewhere in tender documents.

PVC insulated armoured XLPE heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 6Sqmm 2 core, complete all as specified and as directed.

Brick protection to cable using old size class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable, complete all as specified and as directed.

Sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as directed.

Street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with nut, bolts, washer etc., inclusive of one primer coat, one under coat and one finishing coat of silver paint, complete all as specified and as directed.

Taking down old unserviceable hylem switch board having piano type switches, regulator and socket etc and removing the material from site and depositing to MES store yard, complete all as specified and directed.

Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface, fixed in repairs, complete all as specified and as directed.

Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface, fixed in repairs, complete all as specified and as directed.

Modular Metal Flush Box 12 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface, fixed in repairs, complete all as specified and as directed.

Modular white cover plate with frame 2 module, complete all as specified and as directed. all as directed

Modular white cover plate with frame 3 module, complete all as specified and as directed.

Modular white cover plate with frame 12 module, complete all as specified and as directed.

Modular switch 6 Amp, 1 way, 1 module size, fixed in repairs, complete all as specified and as directed.

Modular switch 16 Amp, 1 way, 1 module size, complete all as specified and as directed.

Modular socket 6 Amp, 2 in 1, universal type, 2 module size, complete all as specified and as directed.

Modular socket 16 Amp multipurpose , 2 module size, complete all as specified and as directed.

Modular Step Fan regulator, 120 watts 2 module, fixed in repairs, complete all as specified and as directed.

Modular sheet metal enclosure, SPN type with two pin & earth plug and socket (Industrial type DB) with and including one mini MCB SP, C Curve type of capacity 25 Amp, 10 KA, fixed in repairs, complete all as specified and as directed.

NOTE:- (Applicable to Srl items 99 to 110 only) Items shall be of Make : IndoAsian brand name Elvira/Legrand Brand name Mylinc and Schneider Brand name Livia, irrespective of whatever specified elsewhere in tender documents.

Ceiling fans complete with down rods and acessories 230V, 1200 mm sweep minimum air delivery 210 CFM with service value 6.00 BEE five star rated BLDC, complete all as specified and as directed.

Exhaust fan 300mm sweep metallic body including fixing in opening and making all necessary electric connections, fixed in repairs including depositing old unserviceable materials in MES Store yard, complete all as specified and as directed.

Geyser 25 litre capacity vertical type with steel tank and glass inner lining, 5 star rating complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outlet upto stop cock including taking down the old unserviceable geryser and depositing to MES store yard, complete all as specifed and as directed.

Ventilating fan 250 mm sweep non metallic type incuding self cosing louver and making all electric connections including taking out the old unserviceable and depositing to MES store yard, complete all as specified and as directed.

Earthing complete with GI earth plate electrode 600 mm x 600mm x 6mm thick burried directly in ground not less than 2.25 mtrs below ground level, with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade for protection of earthing lead and GI pipe 20 mm dia for watering pipe with funnel, wire mesh, salt, charcoal dust and excavation, complete all as specified and as directed.

NOTE:- For minimum fair wages, EPF and payment to labour employed, refer Sch A Note No-17,18 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

aggarwal engineers contractors

sunil traders

RASTOGI BUILDERS

M/S MSD & Associate

M/s Navansh Engineers & Consultants