Fabrication and replacement of local junction boxes and panels

Amount

Removal & disposal of existing I&C panels of approximate dimension 2000 (H) X 1000 (W) X 600 (D) maintaining the existing inter-panel cables with proper tagging for reuse in the new replaced panels.

Removal & disposal of existing I&C junction boxes of approximate dimension 200mm X 100mm X 60mm (H X L X W) maintaining the existing inter-panel cables with proper tagging for reuse in the new replaced junction boxes.

Fabrication, supply & installation of fully populated local control panels (Type-1) (Double door Rear opening with front desk) of approx. dimensions (mm): 2000 (H) X 800 (W) X 600 (D) with metal base frame of 100mm height.

Fabrication, supply & installation of fully populated local control panels (Type-2) (Double door rear opening) of approx. Dimensions (mm): 2000 (H) X 800 (W) X 600 (D) with metal base frame of 400mm height.

Fabrication, supply & installation of fully populated local control panels (Type-3) (Single door front opening) of approx. Dimensions (mm): 1800(H) X 800 (W) X 600 (D) with metal base frame of 400mm height.

Fabrication, supply & installation of fully populated wall mount panel (Type-4) (Single door front opening) of approx. Dimensions (mm): 400 (H) X 300 (W) X 300 (D)

Fabrication, supply & installation of wired and populated I&C junction boxes, (Type-1) of approx. Dimensions (mm): 600 (H) X 300 (W) X 200 (D)

Fabrication, supply & installation of wired and populated I&C junction boxes, (Type-2) of approx. Dimensions (mm): 600 (H) X 500 (W) X 200 (D)

Refurbishment of internal wiring of existing installed panel- spray painting, rewiring, dressing, ferruling, termination etc. along with supply and replacement of internal consumable components as per technical specification. Dimension of installed panels: 2200mm (H) X 1000mm (L) X 1000mm (W)

Laying of 1 pair/ 2Core Signal/Control or equivalent Cable (Unarmoured) through wall, tray etc.

Laying of 16 pair/ 30Core or equivalent Cable (Unarmoured) through wall, tray etc.

Fabrication, supply and installation of easy removal/ replacement type line mountable 3/2 way electrically operated on/off valve with solenoid actuator assembly and visual status indication for actuation of air operated valves including end termination using compression tube fittings, ss tubing(5 meter/loop) and electrical connection to solenoid valve. No of solenoid valve per loop is 1.

Fabrication, supply and installation of compact size junction box incorporating 6 nos of 3/2 way electrically operated on/off valve with solenoid actuator and visual status indication assembly for actuation of air operated valves including bulk head type end termination using compression tube fittings, ss tubing(1 meter/loop) and electrical connection to solenoid valve.

Laying of 6 mm OD SS304 tube available in single length and coiled form through wall, false ceiling and support traysthrough wall, tray etc.

Termination of SS 304, 6mm OD Tube with compression tube fittings at two ends of final control devices

Fabrication, supply and installation of 100 mm x 50mm, 2 mm thick, hot dip galvanized perforated cable tray with fabrication of suitable tray support

Cleaning and painting of old MS transmitter racks of approximate dimension 1600mm (H) X 1600(L) X 400(W). Each rack shall be consisting of 22 differential pressure transmitters and 44 rotameters with ss tubing and electrical connections. Before painting all the components are to be de-installed and again re-installed after painting.

SMEC Automation Pvt Ltd (BID ID -3115178)