SPECIAL REPAIR TO ROOF SHEET OF CHAFF CUTTER SHED (NEAR LINE NO 11) WATER PIPE LINE OF LINE NO 02 AND SPL REPAIR TO TOILET BLOCK AND MISC REPAIRS AT BLDG NO 193 AND PROVN OF CHAIN LINK FENCING AT SOLAR POWER PLANT PROVN OF IRON GATE WITH FENCING NEAR

Amount

M & L for Surface dressing n exc 15 cm deep and getting out in soft /loose soil complete all as specified & directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified & directed

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kind of soil complete all as specified & directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick, in soft/loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc. complete all as specified & directed

M&L for brick work with sub class B, bricks old size, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed

S & F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified and directed

S & F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified and directed

M&L 15mm thick rendering on Brick masonary wall surfaces in CM 1:4 finised even and smooth with using extra cement complete all as specified & directed

M&L PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping, bed block, kneels, apex stones etc including weathering slightly rounded or chamfered including form work complete all as specified and directed.

M& L for preparing plastered new surfaces of walls and applying three coats of white wash complete all as specified and directed

M & L for cement concrete 1:3:6 type C2 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified & directed

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, MS pipes or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description exceeding 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel bolts. purpose made.with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut. exc 10 cm but not exc 15 cm and 12mm dia complete all as specified and directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

Supply only Chain link mild steel galvanized fencing (IS-272) 50x50 mm mesh GI wire ( Min 3mm wire of mesh n.exc 4.0 kg/sqm) made up into mattress or cages etc complete all as specified and directed.

Fixing only chain link fencing including line bars, any mesh, size and type to any type of standard, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F Mild steel bars 10mm dia round bar complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surfaces of any description n.exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparing surfaces of steel and iron work, new of any description and girth, not otherwise described, and treated with tar or coal tar black paint to ends of posts, area tarred exc 0.10 Sqm but n.exc 0.50 Sqm each, complete all as specified and directed.

M&L for providing plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete for posts/pillars etc complete all as specified & directed

Use & waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finish flat surfaces complete all as specified & directed

Use & waste of form work to sides of pillars, posts, struts, piers, columns and stanchions, flat, for rough finish surfaces complete all as specified & directed

S&F mild steel TMT bars 500D 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

S&F TMT reinforcement bars 8 mm dia and over upto including 10 mm dia as in stirupps and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for design mix RCC M-25 concrete as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for design mix RCC M-25 concrete as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coat of cement base paint over one coat of alkali resistant primer, complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each.complete all as specified & directed

S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified & directed

S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed.

S&F stainless steel butt hinges 100mm in size complete all as specified and directed.

S&F aluminium anodised barrel tower bolt with bright bolt 200 mm long.all as specified & directed

S&F aluminium sliding bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified & directed

M&L complete removal of existing treatment of walls complete all as specified & directed

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified & directed

M&L brickwork old sizewith subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified & directed

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified & directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises. complete all as specified & directed

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified & directed

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified & directed

S&F non skid coloured ceramic tiles coloured of 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm and including thick screed bed in CM 1:6 complete all as specified and directed.

S&F non skid coloured ceramic tiles coloured of 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete all as specified & directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc.complete all as specified & directed

M&L for Makrana white marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed

S&F 1.00 mm th.mild steel, plain, black sheet in hearths; covering to Manhole cover covering to door chowkats (frames); chullah hoods; water tanks; water troughs: ducts; urinal trought and funnels etc cut to size edges beads, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seanes including bending turning up mitred engles, stopped ends, outlets, etc. as required complete all as specified and directed.

Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified & directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified & directed

M&L for RCC M-25 for beams cantilevers bressumers, lintels over 1.5m span etc complete all as specified & directed

M&L for RCC M-25 for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc etc complete all as specified & directed

M&L for 15 mm thick rendering using ready mix plaster bags on brick / concrete surfaces of external/internal walls finished even and fiar, using water proofing compound @200ML weight of 50kg cement or as per manufacturer instructions complete all as specified and directed : Note:- Water proofing compound shall be measured and paid separately

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces using roller for painting complete all as specified & directed.

M&L Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified & directed

M& L preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified & directed

M&L for one coat of prime using roller complete all as specified and directed.

M&L for Two coat of OBD and 2mm putty using roller for painting complete all as specified and directed

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified & directed

All as described Ser item 64 here-in-before but 20 mm bore pipe.

Supplying and laying of 20mm bore galvanized iron tubes medium grade with all fittings and fixed on walls/ceiling or laying in floors complete all as specified & directed

Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified & directed

Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified & directed

S&F triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks any type & removing complete all as specified & directed

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified & directed

S&F in repairs bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified & directed

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed

S&F in repairs 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified & directed

S&F in repairs ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified & directed

S & F in repairs PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S&F in repairs chromium plated shower rose 125mm size all as specified and directed

S&F in repairs CP soap dish complete all as specified & directed

S &F in repairs CP grating doom 100mm dia complete all as specified & directed

S&F in repairs 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified & directed

S&F in repairs 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed.

S&F in repairs fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F in repairs chromium plated towel rail 20mm dia D type 600 mm long complete all as specified and directed.

S & F in repairs waste pipe any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed

S &F in repairs for Fibre glass reinforced translucent plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified & directed

S&F in repairs Vitreous China wash basin counter top on granite with WPC cup board any colour flat back, size including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified.

S&F in repairs vitreous china ware EWC combined pattern with cistern wall mounted complete with internal fittings complete all as specified & directed

S&F in repairs CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe complete all as specified & directed

S&F in repairs PVC(SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed

S&F in repairs PVC(SWR) bends 75mm bore any radius complete all as specified & directed

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

M & L for 10mm thick cement paster in CM 1:4 mixed with WPC @ 200ml by weight of 50kg cement bag finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate).

Supply only liquid water proofing compound complete all as specified & directed

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface conforming to IS-3384@ 0.30 ltr/sqm nd one coat of bonding material using blown type bitumen grade 85/25 @1.20kg/sqm by forced application and one coat of aluminium paint complete all as specified & directed

M & L for overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. complete all as specified & directed

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified & directed

S&F PVC Bath cabinet with mirror 18"x22"x4.25". Make: commander or equivalent complete all as specified and directed.

M&L for laying 75mm thick PCC 1:2:4 Typee B-1 (using 20 mm graded crushed stone aggregate) as in floor to receive topping layer complete all as specified and directed

Taking down carefully old steel water tubing and connection from its position (in trenches / walls /ceiling) complete all as directed

50/40 mm dia

25/32 mm dia

20 mm dia

Supply and laying galvanised steel tubing "medium grade" laid in trenches and joined including necessary fittings such as bends, elbow, tees sockets etc of following sizes complete all as specified & directed

50 mm dia

40 mm dia

32 mm dia

25 mm dia

20 mm dia

S & F in repairs of gun metal gate valves (ISI marked) with iron wheel head screwed both end for iron pipe including taking down old existing gate valve complete all as specified and directed.

50 mm dia

40 mm dia

25 mm dia

20 mm dia

M & L for Construction of brick masonry valve chamber of size 900 x 900 x 900 mm (Internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick, 150 mm wide off sets allround over 100 mm thick hard core, brick masonry walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally and 150mm below GL externally and top of floor including excavation, earth work in soft / loose soil, 5 mm thick MS sheet cover fixed on 50 mm x 50 mm x 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of red oxide primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

All as described Ser item No. 114 here-in-before but of size 600x600x600 mm

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified & directed

M&L for concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH conforming to IS: 694-1990 PVC insulated, sheathed copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, sheathed and connected to common earth and earth dolly in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc,suitable for modular fixtures including suitable modular box, base plate and outer plate including making good to walls, ceiling etc including white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed for:-

One light/fan/exhaust fan/bell/buzzer point controlled by one, one way 6 Amps switch/bell push button, complete all as specified and directed.

One 3 pin 5/6 amps socket outlet point on Same board, controlled by one, one way 5/6 amp switch.

One 3 pin 5/6 amps socket outlet point on independent board, controlled by one, one way 5/6 amp switch.

M&L for concealed point wiring with 2.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH conforming to IS: 694-1990 PVC insulated, sheathed copper conductor cable including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, sheathed and connected to common earth and earth dolly in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc,suitable for modular fixtures including suitable modular box, base plate and outer plate including making good to walls, ceiling etc including white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as directed for:

One 3 pin socket outlet, 16 amps, with cables 2.5 sqmm size on independent board, controlled by one, one way 15 amp switch.

S&F Modular Switch, 1 Module, 6A, AC, 240V, one way Icomplete all as specified & directed

S&F Modular Socket, 2 Module, 6A, 2/3 pin combined, AC, 240V, one way complete all as specified & directed

S&F Modular Switch, 1 Module, 16A, AC, 240V, one way complete all as specified & directed

S&F Modular Socket, 2 Module, 6A / 16A, 2/3 pin combined, AC, 240V, one way complete all as specified & directed

S&F ceiling rose, surface type, bakelite, 65 x 25 mm, three terminal complete all as specified and directed.

S & F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified & directed

S & F MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

S&F in repairs Isolator DP, 40A, AC, 240V, complete all as specified & directed

S & F lamp holder (Angular / Straight), insulated body, with back plate complete all as specified & directed

S & F Led lamp 9/10 watt complete all as specified & directed

S & F LED tube light fitting T/5 with multi colour option, surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed.

S & F LED tube light fitting T/5 with multi colour option, surface mounting poly carbonate 240 volts 10 watts, 6500K complete all as specified & directed.

S & F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed

S & F ceiling fan complete with blades, down rods, electronic regulator and accessories ,230V, 1200 mm sweep. BEE Five Star rated with Brushless direct current motor (BLDC) complete all as specified & directed

S & F exhaust fan AC single phase 230/240Volts, 50 Hz, PVC body of 250mm sweep with louver complete all as specified and directed.

S & F water heater storage type , electric capacity 25 Ltrs BEE 5 star rated complete all as specified & directed

S & F LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed

Supplying, laying or fixing, jointing and testing LT under ground electric power cable Crossed linked polyethylene ( XLPE Cable) insulated, galvanised steel strip or wire armoured, ISI-7098 marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of 16 sqmm 2 core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc.( Excavation, earth work, sand cushioning, protection bricks/ tiles/ block,clamps, nuts , bolts, washers and pipe shall be measured and paid separately under appropriate items ).

Supply and laying galvanised steel tubing "medium grade" laid in trenches and joined including necessary fittings such as bends, elbow, tees sockets etc of following sizes.

32 mm dia

25 mm dia

20 mm dia

S & F of gun metal gate valves (ISI marked) with iron wheel head screwed both end for iron pipe including taking down old existing gate valve complete all as specified and directed.

25 mm dia

20 mm dia

M & L Sand cushioning to UG cables (8cm deep before laying of cable and 15 cm deep over the cable) complete all as specified & directed. Note :- Punned thickness only will be considered for payment.

M & L Bricks for protection cover to under ground cable (with standard size fly ash bricks) with width equal to length of brick laid dry and flat abutting each other complete all as specified and directed.

Removing of excavated material (soil) to a distance n. exc. 50 Mtr and dispositing where directed at a level n. exc. 1.50 Mtr above the starting point complete all as specified and directed.

Supplying, installing, commissioing and testing of LT switchgear panel board ( Kiosk) of size not less than 600mmx600mmx500mm, IP-55 (outdoor type) , 415 Volts, 50 Hz, AC supply, three phase and neutral ( 4 wire) , 200 Amps coloured horizontal tinned Aluminium bus bars , factory made out of 3.15mm thick MS sheet structure mounted on rigid mild steel angle iron frame of 50mmx50mmx6mm with 400mm long extended legs grouting in PCC 1:2:4 type B1 of size 150mmx150mmx250mm , duly epoxy powder coated internally and externally with approved shade, rubber gasketted, hinged front double door and back openable doors with proper locking arrangements for dust and vermin proof ,complete including adjustable thermal and fixed magnetic release MCCB 4 pole, 100 Amps, 415V,36 KA,50 hz -01 No (incoming),suitable size cable allay, lugs , glands and making connections/ wiring with suitable size SC PVC insulated copper conductor cable complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 3.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised strip 25x4 mm size as earthing lead by means of bolts, nuts, check nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).

GARG CONSTRUCTION CO (BID ID -3334428)