Providing Two Wheeler Parking Shed Rear Side Of The Jaguar Simulator Building Extension Of Existing Shed Rear Side Of Environmental Test Lab Building Providing Concrete Flooring For Car Parking Shelter And Concrete Road From Engineering Block Road To Environmental Lab At MCSRDC Division ARDC Premises HAL DC Bangalore

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: “ Providing Two Wheeler Parking Shed Rear Side Of The Jaguar Simulator Building, Extension Of Existing Shed Rear Side Of Environmental Test Lab Building, Providing Concrete Flooring For Car Parking Shelter And Concrete Road From Engineering Block Road To Environmental Lab At MCSRDC Division ARDC Premises HAL (DC), Bangalore.'' Cont. No: HAL/FMD/C-50/26-27

Name of the Contractor :

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with relevant CPWD specifications amended upto date/ detailed technical specification in tender document and tender drawings if any.

1 Demolishing cement concrete 1:3:6 or richer mix (including equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres etc, all complete as per directions of Engineer-in-charge. 12.00 Cum 2368.53 Rupees Two Thousand Three Hundred Sixty Eight and Fifty Three Paise Only 28422.36

2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, with decorative lamination on one side and balancing lamination on other side, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc., all complete as per architectural drawings and directions of Engineer-in-charge. 7.00 Sqm 1108.54 Rupees One Thousand One Hundred Eight and Fifty Four Paise Only 7759.78

3 Removing / transporting the surplus excavated earth including debris, vegetation waste, concrete waste, etc., to a distance upto 5000m from HAL premises to contractor's own yard including loading, unloading, depositing, spreading, levelling etc., all complete as per directions of Engineer-in-charge. 188.00 Cum 317.86 Rupees Three Hundred Seventeen and Eighty Six Paise Only 59757.68

4 Earth work excavation in all kinds of soil by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 em in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift etc., all complete as per directions of Engineer-in-charge. 205.00 Cum 172.71 Rupees One Hundred Seventy Two and Seventy One Paise Only 35405.55

5 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift etc, all complete as per directions of Engineer-in-charge. 60.00 Cum 190.71 Rupees One Hundred Ninety and Seventy One Paise Only 11442.60

6 Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) for all works up to plinth level excluding the cost of centering and shuttering etc., all complete as per directions of Engineer-in-charge. 43.00 Cum 6628.08 Rupees Six Thousand Six Hundred Twenty Eight and Eight Paise Only 285007.44

7 Steel reinforcement of thermo-mechanically treated bars of grade Fe-500D for R.C.C. works including straightening, cutting, bending, placing in position and binding etc., all complete as per directions of Engineer-in-charge. 3000.00 Kg 104.94 Rupees One Hundred Four and Ninety Four Paise Only 314820.00

8 Providing and laying in position ready mixed or site batched design mix cement concrete of M25 grade with minimum cement content of 330 kg/cum for reinforced cement concrete works upto plinth level; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement etc, all complete as per directions of Engineer-in-charge. 28.00 Cum 9248.12 Rupees Nine Thousand Two Hundred Forty Eight and Twelve Paise Only 258947.36

9 Providing, applying and laying cement mortar (1:6) plastering 15 mm thick on brick/solid blocks/concrete surfaces, finished even and smooth with trowel for Internal/External walls etc., all complete as per directions of Engineer-in-charge. 40.00 Sqm 372.66 Rupees Three Hundred Seventy Two and Sixty Six Paise Only 14906.40

10 Finishing new walls with ready mixed premium acrylic emulsion paint (Company Depot Tinted) in two or more coats applied @ 1.43 litre/10 sqm having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives, over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm etc., all complete as per directions of Engineer-in-charge. 15.00 Sqm 176.36 Rupees One Hundred Seventy Six and Thirty Six Paise Only 2645.40

11 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade in two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture etc, all complete as per directions of Engineer-in-charge. 137.00 Sqm 220.14 Rupees Two Hundred Twenty and Fourteen Paise Only 30159.18

12 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth, applying priming coats with water thinnable cement primer of approved brand and manufacture having VOC content less than 50 grams/litre and painting with premium acrylic emulsion paint interior grade of approved brand and manufacture in two coats having VOC content less than 50 grams/ litre, including applying additional coats wherever required to achieve even shade and colour etc., all complete as per directions of Engineer-in-charge. 40.00 Sqm 362.73 Rupees Three Hundred Sixty Two and Seventy Three Paise Only 14509.20

13 Providing and laying design mix cement concrete of M-30 grade manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer- in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note: Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. 73.00 Cum 10798.79 Rupees Ten Thousand Seven Hundred Ninety Eight and Seventy Nine Paise Only 788311.67

14 Construction of granular sub-base with material conforming to Grade-III (size range 26.5 mm to mm to 0.075 mm) having CBR value-20, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, etc, all complete as per directions of Engineer-in-charge. 80.00 Cum 2732.72 Rupees Two Thousand Seven Hundred Thirty Two and Seventy Two Paise Only 218617.60

15 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with lSI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc., all complete as per directions of Engineer-in-charge. 1.00 Each 1094.48 Rupees One Thousand Ninety Four and Forty Eight Paise Only 1094.48

16 Providing and fixing on wall face 110 mm diameter unplasticised rigid PVC single socketed rain water pipes confonning to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thennal expansion etc., all complete as per directions of Engineer-in-charge. 18.00 Rm 367.21 Rupees Three Hundred Sixty Seven and Twenty One Paise Only 6609.78

17 Providing and fixing precoated galvanised iron profile sheets {size,shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontaV vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc., all complete as per directions of Engineer-in-charge. 130.00 Sqm 718.71 Rupees Seven Hundred Eighteen and Seventy One Paise Only 93432.30

18 Providing and fixing UPVC (Unplastisized Poly-Vinyl Chloride) Openable Doors with multichambered and stiffened / reinforced Framed Doors using 62 mm x 70 mm x 2.3mm (±0.2mm) Profile sections alround as Main Frames with necessary Mullion sections of sizes 76 mm x 62 mm as sash bars and shutters made with the profile sections of size 102 mm x 62 mm, including the cost and fixing of 6mm Clear Toughened Glass in shutters with necessary beadings, the corners of all the profiles of frames and shutters shall be homogeneously fusion heat welded without any gaps. The shutters shall have necessary handles, Locking and other associated fittings, to facilitate smooth operation. Both the Frame and the Shutters shall be Reinforced with GI Profiles of thickness 1.25mm. Fixing the window unit to the existing masonry with anchor fasteners as required. The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials by the installation at site etc, all complete as per directions of Engineer-in-charge. 3.00 Sqm 7560.00 Rupees Seven Thousand Five Hundred Sixty Only 22680.00

19 Providing and fixing UPVC (Unplastisized Poly-Vinyl Chloride) Sliding Doors multichambered and stiffened / reinforced framed Doors using 62mm x 52mm x 2.3mm (±0.2mm) size sections alround as main frames and shutters made with the profile sections of size 79mm x 42mm including the cost and fixing of 6mm Clear Toughened Glass in shutters, the corners of all the profiles of frames and shutters shall be homogeneously fusion heat welded without any gaps. The shutters shall have necessary handles, beadings and other associated fittings to facilitate smooth operation. Both the Frame and the Shutters shall be Reinforced with GI Profiles of thickness 1.25mm. Fixing the window unit to the existing masonry with anchor fasteners as required. The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials by the installation team at site etc, all complete as per directions of Engineer-in-charge.. 3.00 Sqm 5750.00 Rupees Five Thousand Seven Hundred Fifty Only 17250.00

20 Providing and fixing 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm) in panelled or panelled & glazed shutters 25 mm to 40 mm thick for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) etc., all complete as per directions of Engineer-in-charge. 16.00 Sqm 2530.24 Rupees Two Thousand Five Hundred Thirty and Twenty Four Paise Only 40483.84

21 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead etc., all complete as per directions of Engineer-in-charge. 5.00 Sqm 53.17 Rupees Fifty Three and Seventeen Paise Only 265.85

22 Demolishing brick work in cement mortor manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead etc., all complete as per directions of Engineer-in-charge. 0.50 Cum 2004.57 Rupees Two Thousand Four and Fifty Seven Paise Only 1002.29

23 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge (Glazing, paneling and dash fasteners to be paid for separately). 120.00 Kg 516.57 Rupees Five Hundred Sixteen and Fifty Seven Paise Only 61988.40

24 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc., all complete as per directions of Engineer-in-charge. 1400.00 Kg 130.09 Rupees One Hundred Thirty and Nine Paise Only 182126.00

25 Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete, etc, all complete as per directions of Engineer-in-charge. 100.00 Sqm 381.56 Rupees Three Hundred Eighty One and Fifty Six Paise Only 38156.00

26 Providing and fixing pre-moulded joint filler made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS: 1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A, in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, etc, all complete as per directions of Engineer-in-charge. 1000.00 Per cm depth per cm width per metre length 5.16 Rupees Five and Sixteen Paise Only 5160.00

27 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-charge. 200.00 Per cm depth per cm width per metre length 8.42 Rupees Eight and Forty Two Paise Only 1684.00

28 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). Note: Precast C.C. kerb stone shall be approved by Engineer-in-charge. 5.00 Cum 9844.42 Rupees Nine Thousand Eight Hundred Forty Four and Forty Two Paise Only 49222.10

Sub Total Rupees Twenty Five Lakh Ninety One Thousand Eight Hundred Sixty Seven and Twenty Five Paise Only 2591867.26

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 2591867.26 BELOW % 2591867.26

Add 18% GST Rupees Four Lakh Sixty Six Thousand Five Hundred Thirty Six and Ten Paise Only 466536.11

Grand Total (Including GST) Rupees Thirty Lakh Fifty Eight Thousand Four Hundred Three and Thirty Six Paise Only 3058403.36

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/C-50/26-27

Name of Work: Providing Two Wheeler Parking Shed Rear Side Of The Jaguar Simulator Building, Extension Of Existing Shed Rear Side Of Environmental Test Lab Building, Providing Concrete Flooring For Car Parking Shelter And Concrete Road From Engineering Block Road To Environmental Lab At MCSRDC Division ARDC Premises HAL (DC), Bangalore.

Estimated Amount in Rs.: 3060000

Tender Notice Date : 03.08.2026

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company

2 Type of ownership PlsEnter Type of Ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution

4 Address for correspondence: Pls Enter Address

5 (a) PAN No.: Pls Enter Pan NO

5 (b) Goods and Service Tax ID No.

6 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Pls Enter Mobile No

Ph. No. with STD code

FAX No. with STD code

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs

Registration No.

8 I.T Returns for past 03 assessment years

2025-26 Pls Select 'Yes' ' No' for IT Return for All Three years

9 Annual financial turn over during the last 3 years, ending 31st March 2025

YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS

2024- 2025 Rs. Pls Enter Turn over in Rupees for all the 3 years

10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed

ESI Registration No/. with proof if any Remarks if any

PF Registration No. with proof if any

11 Bank(s) details: [Copy of ECS and cancelled cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

12 Solvency Certificate Details

Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

13 Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender [Work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years

Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal

Brief Description of Work: Please enter Details for Work No 1

Completed value of Work in Rs.

Date of Commencement of Work

Date of Actual Completion of Work:

Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal

Brief Description of Work: Pls Enter Details for Work No II

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal

Brief Description of Work: Pls Enter Details for Work No III

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

14 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Mobile No. Pls Enter Details for Person holding Power of Attorney

Ph. No. with STD code

FAX No. with STD code

15 DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

16 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II