REPAIR/MAINT OF PLINTH PROTECTION, HARD STANDING, JOINERY, PLASTERING, INTERNAL WIRING AND FLAME PROOF LIGHTING FOR WSA AND OTHER OTM BLDGS IN TECH AREA AT AF STN GWALIOR

Amount

Demolition of cement concrete ( unreinforced) including floor tiles, screed bed at ground floors and pavings n. exc 15 cm thick below or above ground level and removing the demolished material to a distance exc 500 m but not exceeding 1.5 km and depositing where directed, complete all as specified and directed .

M&L for 75 mm thick plain cement concrete (1:3:6) type C-1, using 20 mm graded stone aggregate as in Plinth protection and finishing the surface even & fair complete all as specified and directed.

M&L for 100 mm thick plain cement concrete (1:2:4) type B-2, using 40 mm graded stone aggregate as in pavings/hard standings and finishing cement concrete surface even & fair, laid in alternate panels complete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregate as in sub base complete all as specified and directed.

Demolition stone slabs , tiles , paver of any description or thickness in floors, walls laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block Glossy finish any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement with pigment complete all as specified and directed.(Make:- ISI Marked as approved by GE)

M&L sand filling under floors or in foundations including watering and consolidation all as specified and directed.

M & L for 25 mm thick cement concrete 1:2:4 type B-0 ( using 12.5mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding in layer of cement mortar for 1:4 for laying floor finishes complete all as specified and directed.

M&L for 10 to 12mm thick Endura desiner tiles of size not exceeding 0.16 Sqm any colour and shape with grey cement and pigment set, jointed and pointed in neat cement slurry as in floors complete all as specified and as directed.(Make :- DUROTA/JOHNSON/ORIENT/SOMANY or equevalent)

M&L for Vitrified Ceramic tiles 8 to 9mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

All as per item no. 11 here-in-before but as in skirting/dado including jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 10mm thick cement plaster 1:4 as backing coat complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 10mm thick rendering cm 1:4 for back coat all as specified and as directed.

M&L for providing cement concrete (1:2:4) Type B-0 (using 12.5mm & 20mm graded stone aggregate) as in kerbs, haunching coping & flooring including necessary formwork rounded or chamfered angles all as specified and directed.

S&F in repair for 2 mm thick PVC flooring, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors including all cutting and waste and work in all position, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed.

S&F 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

Demolition of brick work or stone masonry of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and directed.

Description same all as per item No 21 above but, except brick using old retrieved bricks obtained from demolition in serviceable conditions complete all as specified and directed.

Taking down cement plaster on brick surface or stone wall etc including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed .

M&L for 15mm thick rendering other than fare face of brick/stone masonry walls in CM 1:6 finished complete all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick rendering on fair face of brick walls in CM (1:4) surface finished even and fair complete all as specified and directed.

M&L for two coat of distemper oil emulsion to newly plastered surfaces of walls including preparation of surface over one coat of primer complete all as specified and directed.

M & L preparation of new plastered surface and applying two coat of external weather coat over a coat of primer on external wall all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators with one nor more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed by Engr-in-Charge.

S&F powder coated aluminium door shutters, aluminium section weight 0.55 Kgs/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 02 Nos in each door, hinges, anodised aluminium snap beading, screws (Thickness of powder coating not less than 50 micron) etc complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weight 0.55 Kgs/m including necessary joining cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws (Thickness of powder coating not less than 50 micron) etc complete all as specified and directed.

S&F Aluminium grills size exc. 4mm x 4mm and aperture n exc. 80mm incl. fixing with aluminium channel, 1mm thick with steel screw and tint match with existing complete all specified and directed.

S&F 4mm thick aluminium composite panel of any colour fixed to door with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed by Enge-in-Charge.

S&F 4mm thick tinted glass fixed with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed.

S&F Factory made solid PVC Moulded door shutter (with Wood free EPS), 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

S & F solid PVC moulded door frame of size 50 mm x 47 mm made out of 5 mm thick PVC sheet (shade matching with door shutter) reinforced with MS Square tube and edges will be painted to match with printed sheet complete all as specified and directed.

S&F IInd class hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L preparation of new wooden surface and applying two coat of synthetic enamel paint over one coat of pink primer of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

S&F 100 mm long powder coated Aluminium tower bolt, tint existing to match complete all as specified and directed.

S&F 150 mm long powder coated Aluminium tower bolt, tint existing to match complete all as specified and directed.

S&F 100 mm long powder coated Aluminium handles, tint existing to match complete all as specified and directed.

S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long Aluminium handles, cast type anodised, complete all as specified and directed.

S&F in repair for 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed and specified.

S&F in repair for 250 mm long powder coated aluminium sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed and specified.

S&F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed and specified.

S&F 75 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as directed and specified.

S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C21 complete all as directed and specified.

S&F in repair, door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty including necessary cutting to floor and concrete work complete all as specified and directed.

S&F in repairs 100 mm Brass Mortice lock, 4 Levers, vertical type suitable for aluminium doors complete all as specified and directed.

M&L for preparation of old decorated wall surfaces and applying one coat of distemper oil emulsion with Roller on wall surfaces including filling the cracks and depression with putty to make the surface even & smooth complete all as specified and directed.

M&L for Preparation of old decorated plastered or unplastered surfaces of external walls and applying one coat of exterior weather proof Paint including filling cracks/depressions with wall putty to make the adjacent surface even and smooth complete all as specified and directed.

M&L for Vitrified Ceramic tiles 8 to 9mm thick (square / rectangular) polished, area of each tiles exceeding 0.42 sqm, but n exc. 1 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

All as per item no. 57 here-in-before but as in skirting/dado including jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 10mm thick cement plaster 1:4 as backing coat complete all as specified and directed

Providing & Fixing of Glass Mosaic Tiles on finished plain wall surface 20 x 20mm in all colors, design Fixing in customize design as per direction of engineer in-charge. The glass mosaic tiles to be fixed on surface with the help of approved adhesive applied at the rate of 2.5 kg per Sq.M and grouting for the same, the rate is inclusive of all operation (incl cutting of existing tiles in required patttern and design etc) & material and required pattern approved by engineer in-charge for wall tiling or in skirting/dado etc complete all as specified and directed. Note : Printing of tiles as approved by GE

Demolition of cement concrete ( unreinforced) in Roofs, floors (other than ground floors), tiles including existing roof treatment (screed plaster,&tarfelt of any description) and removing to a distance exc. 500 m and n.exc. 5 Km from site complete all as specified and directed

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in and levelling course etc over roof surface finished surface even and smooth complete all as specified and as directed.

M & L for 10 mm thick screed bed in cement mortar 1:4 mixed with using liquid water proofing compound as per manufacturers instructions (Note:Water proofing compound shall be measured and paid seprerately under respective item of "BoQ")

Material and labour for application of 5 layer SHR waterproofing Coating System on leaking concrete surface by through surface preparation followed by one absorption coat of Thermacool WP51, Nano-tech modified, UV Resistant, elastomeric clear coat having min 50% solids, then overcoating with 2 coats of Thermacool WP51+ Cement mixture as water proofing coat having +450% elongation, Tensile strength min 2.2Mpa and then top coated with 2 coats of THermacool 0.3C pure acrylic based, UV resistant non alloying bio organism resistant (Antifungal, Anti bacterial) Solar IR heat reflective coating confirming to BIS Standard IS17218:2019 with pull of adhesion 2.8Mpa, passes 2000 hours accelrated durability test, Suitable for all types of cementitious surfaces, white colour, mat, surface coverage 3.25 Sqm per ltr/per 2 coat, DFT 100-120 microns using brush roller airless spray gun as applicable. The product should have been tested at IIT or NABL approved lab and application is to be done by Thermacool approved applicator only.(Make :Thermacool) Note: A guarantee for the smae of 5 years will be submitted product comp[any as well as application against leakage/seepage painting work

Supply only liquid water proofing compound complete all as specified and directed

Taking down carefully existing unserviceable flame proof point wiring of any description & in any height ( 4m to 16m ) position with and including existing conduit fixed on surface with and including existing junction boxes in between the point wiring complete, including making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. NOTE: (i) Old existing junction boxes obtained in serviceable condition from taking down of point wiring shall be re-used in the work. (ii) Taking down / replacement of existing fittings like switches/sockets / switch fuses / tube light fittings etc. if any, shall be measured and paid for separately under appropriate item of Schedule `A'

Material and labour for flame proof point wiring for one light point or one socket point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, FRLSH PVC insulated & unsheathed cable, 1100 volts grade in and including stove enameled black, rigid steel conduits of size not less than 20 mm dia (Medium grade) fixed on surface of walls/ceilings any height ( 4m to 16m )as directed with all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core FRLSH, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly / fittings etc. complete all as specified and directed by Engineer-in-Charge. NOTE : (i) Old junction boxes retrieved in serviceable conditions shall be re-used in the work. However, additional junction boxes, if any required, for making new point wiring other than the quantity of junction boxes retrieved from taking down of point wiring, shall be measured and paid for separately as ‘’supply only’’ under appropriate item of Schedule `A' but fixing element of any type of junction boxes new or old is deemed to be included in the rates quoted by the contractor for the above item. (ii) Wiring shall be terminated and connected to the relevant switch / controlling switch gear and relevant fittings / sockets all as directed and controlling switch / fittings shall be measured and paid for separately under appropriate item of Schedule `A'.

All as per item No.66 here-in-before but point wiring with using 2.5 Sqmm (nominal area) stranded copper conductor, single core, FRLSH PVC insulated & unsheathed cable for 16 A Flame proof Switch and socket complete all as specified and directed by Engineer-in-Charge.

Supply & fixing of flame proof push button 10 Amps in LM 6 metal enclosures, conforming to complete all as specified and directed by Engineer-in-Charge.

Supplying & fixing of flame proof, switch socket & plug combined made of aluminum alloy LM-6 having 2 pole + earth suitable for 250 volts supply and current rating of 16 Amps complete all as specified and directed by Engineer-in-Charge.

Supplying & fixing of flame proof, switch socket & plug combined made of aluminum alloy LM-6 having 2 pole + earth suitable for 250 volts supply and current rating of 25/32 Amps complete all as specified and directed by Engineer-in-Charge.

M&L for sub main wiring in repair concealed using Four single core PVC insulated, FRLSH, stranded copper conductor cable any height ( 4m to 16m ) of size 4 Sqmm for sub main wiring, along with one run of 4 Sqmm PVC insulated, FRLSH, Stranded copper conductor cable for earth continuity conductor in steel conduit complete all as specified and directed by Engineer-in-Charge. Note: (i)Four run of single core PVC cable with one run of earth wire and one run of steel conduit together shall be measured as one unit. (ii) Cost of making good to the disturbed surface to match with the existing is deemed to be included in the quoted rate.

All as per item No. 71 here-in-before but using Two single core, 2.5 Sqmm copper conductor cable and with earth continuity conductor. Note: (i)Two run of single core PVC cable with one run of earth wire and one run of steel conduit together shall be measured as one unit. (ii) Cost of making good to the disturbed surface to match with the existing is deemed to be included in the quoted rate.

All as per item No. 71 here-in-before but using Two single core, 1.5 Sqmm copper conductor cable and with earth continuity conductor. Note: (i)Two run of single core PVC cable with one run of earth wire and one run of steel conduit together shall be measured as one unit. (ii)Cost of making good to the disturbed surface to match with the existing is deemed to be included in the quoted rate.

Supply & fixing in replacement of flame proof FLP Flood light 60 W LED fittings as per IS : 2148 / 1981 & 2206 (Part-I )1984, Temperature class T-4, & made of cast aluminum alloy LM-6 having inside & outside light grey powder coating shade No 631 as per IS: 5 & one No internal earthing terminal and 02 Nos external earthings of screw of M6- size with 02 Nos plain washers heat resistant glass including taking down the unserviceable fitting from any height ( 3m to 16m) complete all as specified and directed.

Supply & fixing in replacement of flame proof FLP Flood light 70 W LED fittings as per IS : 2148 / 1981 & 2206 (Part-I )1984, Temperature class T-4, & made of cast aluminum alloy LM-6 having inside & outside light grey powder coating shade No 631 as per IS: 5 & one No internal earthing terminal and 02 Nos external earthings of screw of M6- size with 02 Nos plain washers heat resistant glass including taking down the unserviceable fitting from any height ( 3m to 16m) complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of flame proof FLP Flood light 90 W LED fittings as per IS : 2148 / 1981 & 2206 (Part-I )1984, Temperature class T-4, & made of cast aluminum alloy LM-6 having inside & outside light grey powder coating shade No 631 as per IS: 5 & one No internal earthing terminal and 02 Nos external earthings of screw of M6- size with 02 Nos plain washers heat resistant glass including taking down the unserviceable fitting from any height ( 3m to 16m) complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of flame proof FLP Flood light 120 W LED fittings as per IS : 2148 / 1981 & 2206 (Part-I )1984, Temperature class T-4, & made of cast aluminum alloy LM-6 having inside & outside light grey powder coating shade No 631 as per IS: 5 & one No internal earthing terminal and 02 Nos external earthings of screw of M6- size with 02 Nos plain washers heat resistant glass including taking down the unserviceable fitting from any height ( 3m to 16m) complete all as specified and directed by Engineer-in-Charge.

Supply & replacement of flame proof distribution board 8 way single pole & neutral in LM-6 metal enclosures with and including 01 No MCBs, 2P, 32 Amps - 01 No & 06 Nos MCB single pole 6 Amps `C’ series with complete internal bus bar & wiring up to terminal all as specified and directed.

Supply & replacement of flame proof distribution board 4 way single pole & neutral in LM-6 metal enclosures with and including 01 No MCBs, 2P, 16/25 Amps - 01 No & 02 Nos MCB single pole 6/10 Amps `C’ series with complete internal bus bar & wiring up to terminal all as specified and directed.

Supply & fixing in replacement flameproof distribution board 4 way Triple pole & neutral in LM-6 metal enclosures with and including 01 No MCB, 4P, 63 Amps as Incoming & Out going MCB, 1P, 6 Amps - 12 Nos with complete internal bus bar & wiring up to terminal all as specified and directed.

Supply & fixing in replacement FLP Flexible metelic Hose conduit M20/3/4ET 300 mm long complete all as specified and directed.

Supplying and fixing in replacement flame proof junction box 3 way ¾ “ (100 mm dia) entry in LM – 6 complete all as specified and directed.

M/s. Ravi and brothers

M/S Amit Traders

M/s United Construction Company

M/s Bijender Singh

M/s Manish Contractor

M/S YOGANSH CONSTRUCTION CO.

m/s vikash Engineers

lodhi builders

M/s Anjali Construction

M/S LAKSHYA CONSTRUCTIONS