CWE/P-100/2020-21 SPECIAL REPAIR TO BLDG NO P-07 AT BASOLI UNDER GE BASOLI

Amount

Demolition of cement concrete (un-reinforced) in ground floors and paving of any thickness (below or above ground level), complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each including taking out hold fast / iron mongery, complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5Sqm and not exceeding 4 Sqm each including taking out hold fast / iron mongery, complete all as specified and directed.

S&F 1.25mm thick pressed steel frames for doors with one shop coat of red oxide primer 125 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, and hold fast after taaring of hollow portion of frame, complete all as specified and directed.

S&F 1.25mm thick pressed steel frames for doors with one shop coat of red oxide primer 105 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, and hold fast after taaring of hollow portion of frame, complete all as specified and directed.

M & L for Plain cement concrete 1:3:6 type C-1(using 20mm graded crushed stone aggregate) as in back filling hollow of frame , complete all as specified and directed.

S&F Plain framed factory made 35mm thick shutter of 2nd class hard wood rail & style (two panel) with lock rail and panel of 9mm BWP commercial plywood, the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated including one coat of pink primer, complete all as specified and directed.

S&F Glazed and skelton shutters factory made 35mm thick of 2nd class hard wood rail & style open rebated and prepared to receive glass or wire gauze etc. shutters (without shash bars), size of members of shutters as specified in SSR Part-1, secton 8, clause 8.24(a) kiln seasoned and pressure treated including one coat of pink primer, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixed, complete alll as specified and shown in relevant drawing and also complete all as directed by Engr-in-Charge.

S&F Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with Particle Board Core 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing and also complete all as directed by Engr-in-Charge.

S&F 18 to 20mm thick PVC board prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws as in cup board shutters, frame and shelves, complete all as specified and directed.

M&L box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters made with wire gauged shutter & glass glazed shutter ( wire cloth and glass panes only shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welding including 2 Nos tower bolts 150 mm long for each leaf and including 10 mm square bar grills at spacing shown on drg welded to GI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg no CEPZ/TD-354/09 sheet 1/3 to 3/3 including a shop coat of red oxide primer complete all as specified and directed. Note :- (i) Cutting holes for hold fast making good in cement mortar 1:3 and PCC 1:2:4, type B-1 shall be included in the quoted rates.

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed.

S&F 3.00 mm thick frosted glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

M&L for Preparation new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint of colour as approved by GE, complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces including preparation of surface and one coat of pink primer, complete all as specified and directed.

Supply and fixing hasp and staple,75 mm long aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified. ISI Marked

Supply only stainless steel cold rolled butt hinges medium weight 100 mm long, complete all as specified and directed.

Supply and fixing Extruded aluminium alloy handles, fabricated type, anodised of size, ISI marked 125mm and fixed, complete all as specified and directed.

Supply and fixing Aluminium anodised, barrel tower bolts of extruded section of size 150mm ISI marked and fixed, complete all as specified and directed.

Supply and fxing in repairs, 300mm mild steel ordinary spring for door, ordinary rat tail rod pattern springs ISI marked including roller and roller plate fixed in repair complete all as specified and directed.

S & F in repair of 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section and fixed, complete all as specified and directed.

Supply and fixing Harrison rails(Curtain rails) (ISI marked), mild steel chromium plated wih fixing brackets, stops, rollers etc., complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including taking down cement plaster on brick or concrete surfaces in any description etc including raking out joints, hacking for key , scrubbing down with water, complete all as specified and directed.

Material and labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement including taking down cement plaster on brick or concrete surfaces in any description etc including raking out joints, hacking for key , scrubbing down with water complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement including taking down cement plaster on brick or concrete surfaces in any description etc including raking out joints, hacking for key , scrubbing down with water, complete all as specified and directed.

M & L for applying two coats of weather proof exterior emulsion paint on newly plastered surfaces of walls including preparation of surfaces, complete all as specified and directed.

M & L for preparation of new plastered surface of wall and wall care putty of 3mm thick and two coat of oil bound distemper, complete all as specified and directed.

M & L for applying three coats of white wash including preparation of newly plastered surfaces of ceiling, complete all as specified and directed.

M&L for one coat of weather proof exterior emulsion paint paint on old plastered surfaces of walls including preparation of surfaces, complete all as specified and directed.

M & L for preparation of old treated surface of wall including preparation of surfaces and wall care putty of 3mm thick and two coat of oil bound distemper over and including a coat of primer, complete all as specified and directed.

M & L for applying one coat of white wash including preparation of old plastered surfaces of ceiling complete all as specified and directed.

M&L for 75mm thick Plain Cement Concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate), as in plinth protection etc laid in alternate bays finishing even and smooth without using extra cement, complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor finishing surface even and smooth without using extra cement,complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in skirting/dado 350 x 250 x 7mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in cement mortar 1:4 as in backing coat rough finished surface including dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified directed.

M&L for Non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including screed bed of 15 mm thick in cement mortar 1:4, including dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), including removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, size of each slab not be less than 0.28 Sqm, including rubbing and mirror polishing complete including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over and including cement screed in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified & directed.

M&L for 18 to 20mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking plateform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and moulding the edges where ever directed by Engr-in-charge, complete all as specified and directed.

S & F repairs vitreous china wash down water closet pan (Pedestal Pattern ) white including connection to drain (out going pipe) and to flushing pipe, anti syphonage pipe, fixing bolts, etc complete all as specified and as directed

S&F repairs Plastic water closet seat, white, closet pattern with flat bottom, and including cover for pedestal pan and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F of health faucet ABS with 1.2 m SS flexible tube & ABS wall hook fixed with necessary fixers, complete all as specified and directed.

Supply and fxing in repair vitreous china wash hand basin white flat back side of size 550 x 400 mm including waste coupling of chromium plated (half or full threaded) 32 mm dia (min wt 45 gms), including brackets and PVC waste pipe of 32 mm dia complete all as specified and directed.

Dismantling of water tanks and removing to store capacity exceeding 250 ltr and not exceeding 500 ltr and removing to store, complete all as specified and as directed.

S&F of Rotational moulded cylindrical vertical polythene water storage tank, coloured, tripple layer with threaded closed top (lid), 1000 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug,complete all as specified and directed.

Supply and fxing in repairs, PVC valve less symphonic action type flushing cistern 10ltr capacity ISI marked, low level white with inlet ball valve float and handle including brackets PVC flush pipe for low level cistern including all joints fixed, complete all as specified and directed.

Supply and fixing in repairs, PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing to waste pipe with solvent cement fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

Supply and fixing in repairs, 100 mm dia cast iron soil waste and vent spun pipe ISI marked in any length with or without ears with lead joints laid in floor/wall, complete all as specified and directed.

Supply and fixing in repairs, 75 mm dia cast iron soil waste and vent spun pipe ISI marked in any length with or without ears with lead joints laid in floor/wall, complete all as specified and directed.

Supply and fixing in repairs, Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured), bore of pipe 100mm ISI marked, complete all as specified and directed.

Supply and fxing in repairs, Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) ISI marked, bore of pipe 75mm, complete all as specified and directed.

Supply and fxing in repairs, Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchs, ISI marked, bore of pipe 100mm, complete all as specified and directed.

Supply and fxing in repairs, Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchs, bore of pipe 75mm, complete all as specified and directed.

S&F of PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint fixed to walls as drainage pipe, complete all as specified and directed.

S&F of PVC connection 15mm size with PTMT nuts on both ends of length 450mm , complete all as specified and directed.

S&F of 5.5 mm thick glass shelf fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms), complete all as specified and directed.

S&F of Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia D type Brass Chromium plated incl necessary brackets, fixed with chromium plated screws and wooden/plastic cleats, complete all as specified and directed.

S& F of grating round 140 mm size of PTMT.(Minimum weight 50gms)complete all as specified and directed.

Supply and fixing in repairs of stop cock (ISI marked) of cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified.

S&F in repair of "Basin Mixture" 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe of 15mm dia, including all necessary fitting arrangement suitable for WHB, complete all as specified & directed

Supply and fixing in repairs of bib taps 15mm bore of cast copper alloy, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm dia for brass ferrule, fixed in repair, complete all as specified and directed.

S&F of 15mm brass chromium plated mixer copper alloy ISI marked with crutch or butter fly handle high pressure screwed for iron pipe of 15 mm bore including all necessary fitting arrangements suitable for fixing on wall, complete all as specified and directed.

S&F of brass chromium plated fancy type shower rose 150 mm size with swivel joints & arm fixed in repairs including fixing to steel pipe or union complete all as specified and directed.

Supply and fixing in repairs stop valve of cast copper alloy chromium plated with long shank concealed type screwed down high pressure screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified and directed.

Supply and fixing of Stainless steel sink 1mm thick for kitchen wih plugs, washers and wastes including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm fixed, complete all as specified and directed.

Supply and fxing in repairs stainless steel kitchen plate rack made out of 1 mm thick sheet of size 915 x 915 x 225 mm dia (ISI Marked) all as specified and directed.

Supply and fixing of Waste coupling of chromium plated (half or full threaded) (Minimum weight 45gms) for 32mm bore dia of discharge pipe to WHB, sink, complete all as specified and directed.

Taking up or down of steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down of steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and including pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick masonry, complete all as specified and directed.

Fixing only of old steel water tubing of 15mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as required, complete all as specified and directed.

S&F in Steel water tubing of 15 mm bore ‘medium grade’ (ISI marked) galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified and directed.

Fixing only of old steel water tubing of 20mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as required, complete all as specified and directed.

S&F in Steel water tubing of 20 mm bore ‘medium grade’ (ISI marked) galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified and directed.

M&L for Rendering or plastering work 10 mm thick in cement mortar 1:3 in fascia or edging of chajjas, ceiling and roof projections etc including taking out pealed off plaster/concrete and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed.

Demolition brick tiles or terracing tiles, single layer on roof, complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust including 20 mm thick screeding in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement & finishing the surface even and smooth without using extra cement, complete all as specified and directed (WPC shall be measured and piad separetely)

Supply only Liquid water proofing compound, complete all as specified and directed

M& L for applying water proofing membrane APP (Atactic Polyprobhlene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulation of weight not less than 3.6 kg/sqm and thickness not less than 3 mm, laid by torch application method with overlap 100 mm on length side and 150 mm on the width side over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 on prepared surfaces, complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor finishing surface even and smooth without using extra cement,complete all as specified and as directed.

M & L for preparation of newly plastered or unplastered surfaces of wall /facia/Chajjas etc of any description over 10cm width or girth not otherwise described and applying two coat of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed.

M & L for preparation of old plastered or unplastered surfaces of wall /facia/Chajjas etc of any description over 10cm width or girth not otherwise described and applying two coat of weather proof exterior emulsion paint over a coat of primer, complete all as specified

M&L for coloured chequered cement concrete tiles of size 300 mm x 300 mm x 25 mm thick, with grey cement and pigment, set jointed and pointed in neat cement slurry as in floor including 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) and including 15mm thick cement screed bed or bedding layer in cement mortar 1:4 on PCC,complete all as specified and directed.

Taking down carefully aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed.

M&L for Point wiring with two runs of 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and including PVC conduit concealed with pressed mild steel terminal boxes rectangular / square type of adequate size with thickness of 1.5 mm duly painted with a coat of red oxide primer with suitable thickness ISI marked plastic laminated sheet cover of adequate size for one light or one fan controlled by one switch including one run 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire (green colour) to common earth dolly complete all as specified and directed. Note: (a) Unit rate include for cutting chases for conduits and sinking of boxes and making good to wall, floors, etc. (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan etc with proper fixing clips all as specified and directed.

All as per Srl item no 87 here-in-before but one light pont controlled by two way switches with cables 1.5 Sqmm size, complete all as per specified and directed

All as per item No 87 here-in-before but for 5 Pin socket outlet 5 Amps point on independent board with PVC insulated copper conductor cable 1.5sqmm, complete all as specified and directed.

All as per above item no 87 here in before but for one 3 pin socket outlet 5 amp on same board, complete all as specified and directed.

All as per above item no 87 here in before but one bell / buzzer point controlled by one push button, complete all as specified and directed.

M&L for Point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkum boxes having thickness as specified 3mm bakalite laminated sheet for one 3 pin socket outlet 15 Amp on independent board including 2.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete, all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green)

S & F modular switch 2 way 6A, 1 module, complete all as specified and directed

S&F modular push bell switch 1 way 6A, 1 module, complete all as specifed and directed.

S&F modular switch 1 way 6A, 1 module, complete all as specified and directed.

S&F socket 6A- 3/5 pin 2 module, complete all as specifed and directed.

S&F of modular socket 16A, 6 pin 3 module, complete all as specifed and directed.

S&F of modular switch 16A, one way, 1 module, complete all as specifed and directed.

S & F metal flush box, 1/2 module for modular switch/socket, complete all as specified and directed.

S & F modular metal flush box 3 module, for modular switch/socket complete all as specified and directed.

S & F modular metal flush box 4 module, for modular switch/socket complete all as specified and directed.

S & F modular metal flush box 6 module, for modular switch/socket, complete all as specified and directed.

S & F for white cover plate with frame, 1/2 module complete all as specified and directed

S & F for white cover plate with frame,3 module, complete all as specified and directed

S & F for white cover plate with frame, 4 module, complete all as specified and directed

S & F for white cover plate with frame, 6 module, complete all as specified and directed

S&F modular fan step regulator, 120 W- 2 module for ceiling fan 1200/1400 mm sweep, complete all as specified.

S & F for bed side LED fitting 3 watt wall mounted, complete all as specified and directed

S & F for decorative wall mounted light fitting made up of poly carbonate suitable for retro fit LED bulb 15 W made up of high grade poly carbonate with self screwed polycarbonate diffuser in opal finish for soothing light effect with enhanced UV stability & heat resistance, glass filled engineering plastic B22d lamp holder with electrical grade copper contacts and including 15 W LED lamp, complete all as specified and directed.

S&F for Ceiling rose, 3 phase/bakelite 65x50mm two or three therminals isolated body fixed on PVC round block, complete all as specified and directed.

S & F LED Tube light fitting 20 watt , 230 volts, Energy efficient including LED tube rod 4' CRCA sheet Industrial box type with efficiency 100 lm/W, 2.5 KV voltage surge protection, HPF>0.9 and 2000 lumens T8, Box type, housing with reflector cover channel, bipin holders, connector block, etc complete with tube rod LED 20 Watt, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed.

S&F for LED mirror fitting, 1x8w, 230v Energy efficient with efficiency 100 lm/W, 2.5 KV voltage surge protection , HPF>0.9 and 2000 lumens, box type, housing with reflector cover channel, , bipin holders, connector block, etc complete with tube rod LED 8 Watt, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed.

S&F for 4 way VTPN 415 V AC 50 Hz, double door IP 54, isolated neutral bar, cement spill protector with mechanical impact of strength IK-09 for provision of MCCB 100 Amps, 4 pole, complete all as specified and directed.

S&F MCCB 100 Amps, 415 V, 25 KA, 4 pole, 50 hz magnetic breaking capacity 10 KA fix type, complete all as specified and directed.

M&L Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 230 volts, 50 Hz, 8 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified and directed.

S&F MCB single pole (SP) 63 Amps with 10 KA breaking capacityof 'C' series in distribution boards, complete all as specified and directed.

S&F MCB single pole and neutral (SPN) 63 Amps with 10 KA breaking capacityof 'C' series in distribution boards, complete all as specified and directed.

S&F MCB single pole (SP) 6 to 32 Amps with 10 KA breaking capacityof 'C' series in distribution boards, complete all as specified and directed.

S&F in repair for sheet metal powder enclosure powder coated versatile single door single pole and neutral (SPN) distribution board 230 Volt, 50 Hz AC supply for 02 way, fitted with MCB 20 Amps SPN, complete all as specified and directed.

Supply and laying in repairs of existing circuit/submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 6 sqmm drawing into and including concealed PVC rigid non metallic conduit of 25mm dia and single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 6 sq mm as earth wire including cutting chases in brick wall, rendering in cement mortar 1:4 and making good the disturbed surfaces to match existing, complete all as specified & directed. Note: Two runs of 6 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 6 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of 25mm dia wiil be measured as a one unit.

Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3 of SSR Part I, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI medium grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade crushed stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified. Note: The rate quoted include cost of 7.5 metre earthing wire with protection pipe.

S&F of ceiling fan complete of size 1200 mm sweep suitable for 230 V AC (BLDC type) with provision of suitable size fan hook in ceiling, including down rod, complete all as specified and directed.

S&F of exhaust fan copper wound complete of PVC body size 230 mm sweep suitable for 230 V AC with outer cover including provision of suitable size hole in wall to fix the exhaust fan, complete all as specified and directed.

Taking down existing electric meter and re-fixing the same including electrical connections at existing place, complete all as specified and directed.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

KAPOOR AUTOMOBILES

JAI DURGA CONSTRUCTION CO

M/s. Jaswant Singh Govt Contractor

Ms Dalip Kumar and Co.

Standard engineers

AGGARWAL ASSOCIATES

M/S ANSHUL ENTERPRISES

SATISH AND CO

M/S ONKAR SINGH PATHANIA

M/S SUKHMANI ENGINEERS

KULBHUSHAN AGGARWAL