Design, successful testing and commissioning of 3.00 lac gallons cap.RSFP incl. flash mixer as per enit

Amount

Earth work in excavation by manual means over areas ( exceeding 30cm and up to 1.5 Mtr in depth,, 1.5 Mtr in width as well as 10 Sqm on plan) including disposal of excavated earth up to 1 Mtr from cutting edge, disposed earth to be levelled and neatly dressed in all kinds of soil.

Extra for every additional lift of 1.5 mtr or part thereof

Extra for every additional lead of 25m beyond 1 m up to 250m &deposited to a level of 1.5m for avg.4 leads

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in All kinds of Soil

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 100mm dia GI pipe ( light class)

80mm dia GI pipe light class

65mm dia Gi pipe light class

50mm dia GI pipe light class

40mm dia GI pipe light class

25mm dia GI pipe light class

20mm dia GI pipe light class

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329: 200mm dia DI pipe K-7

150mm dia DI K-7

providing push on joints to centrifugally cast ( spun) iron pipes or ductile iron pipes incl testing of joints and incl. the cost opf rubber gasket 200mm dia DI pipes complete incl all carriages and head load

providing push on joints to centrifugally cast ( spun) iron pipes or ductile iron pipes incl testing of joints and incl. the cost opf rubber gasket 150mm dia DI pipes complete incl all carriages and head load (RTQ)

providng and laying stone soling on level

providing and laying in position cement concrete of specified grade excl the cost of centring shuttering all work upto plinth level 1:4:8 ( 1 cement 4 fine sand 8 graded stone agg) 40mm nominal size crushed

1:3:6 ( 1 cement 3 coarse sand 6 graded stone agg) 40mm nominal size

1:2:4 ( 1 cement 2 coarse sand, 4 graded stone agg)

providing and laing postiion specified grade of reinforcement concrete excl the cost of centring shuttering finishing and reinforcement all work up to plinth level 1:1.5:3 ( 1 cement 1.5 coarse sand,5 graded stone agg) 20mm nominal size

Reinforced cement work in walls ( any thickness) incl. attached pilasters , buttresses, plith and string courses, fillets, columns, pillars, piers, abutments , posts and struts etc upto floor five level excl the cost of centring shuttering, finishing and reinforcement 1:1.5:3 ( 1 cement 1.5 coarse sand 3 graded stone agg) 20mm nominal size)

providing and laying reinforced cement concrete 1:1.5:3 ( 1 cement 1.5 coarse sand 3 graded stone agg) 20mm nominal size in suspended floor, balconies, landings and stair case having upto 15 slope excl the cost of centring and shuttering all work upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level mix (1:1:2)

All works above plinth level upto floor five levels (1:1:2 mix

pumping out water caused by springs ,tidal or river seepage broken water mains or drains and the like

Reinforced cement concrete work in beams,suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair casesupto floor five level excluding the cost of centring,shuttering, finishing and reinforcement 1:1.5:3 ( 1 cement 1.5 coarse sand 3 graded stone agg) 20mm nominal size

Cement conc. Flooring 1:2:4 (1 Cement 2 course of sand 4 graded stone aggred. Finished with a floating cost of neat cement incld. Cements slurry butexclude. 50mm thick with 20mm nominal size stone aggrts. Crushed

Brick work with common burnt clay F.P.S (Non-modular bricks of class designation 75 in foundation & plinth in cement mortor 1:4 ( 1 cement 4 fine sand)

p/f plain eves boarding 250 X32mm 2nd class deodar wood

Extra for brick work in super structure above plinth level upto floor five level by manual means cement mortor 1:4 ( 1 cement 4 fine sand)

p/f of soffit boarding of kail wood as per directions of engineer incharge

centring and shuttering propping etc and removal of form for foundation footings bases of columns etc for mass concrete

walls any thickness incl attached pilasters, buttresses, plinth and string courses etc

lintels beams plinth griders, bressmuers and cantilevers

columns pillars, piers, abutments posts and struts

suspended floors, roofs , landings balconies and access platform

stair ( excl landings) except spiral staircases

Edges of slab and breaks in floors and walls

Extra for shuttering in circular work 20% of respective centring and shuttering foundations

walls

beams

Reinforcement for RCC work incl. straightening, cutting, bending, placing in position and binding all complete TMT bars

12mm cement plaster finished with an floating coat of neat cement mix 1:3 ( 1 cement 3 fine sand)

12mm cement plaster mix 1:4 ( 1 cement 4 fine sand)

p/f wood work in truses, purlins rafters posts and the like in budloo wood

structural steel work welded in built up sections ms lid ladder fixing in position and applying a priming coat of approved steel primer all complete for MS Lid and ladder for SR

providing and incorporating ( during concreting GP sheet strip water seal 1.25mm thick at construction joints of ends so as to form a continous barrier (RTQ)

providing corrugated GS sheet roofing incl. vertical/curved surface fixed with polymer coated J or L hooks bolts and nuts 8mm diameter with Gi limpet washers filled with white lead and incl a coat of approved paint on over lapping of sheets complete upto any pitch in horizontal/vertical or curved rafters and trusses and incl. the cost of purlins, rafters and trusses and incl. cutting to size and shape where ever required 0.50mm thick with zinc coating not less than 275 gms

providing ridges or hips of width 60cm over all width plain GS sheets fixing bolts and nuts 8mm dia GI limpet and bitumen washers complete 0.50mm thick zinc coatings not less than 275mm gm per mtrs

Providing and fixing UV stabilized fiber glazed reinforcement plastic sheet roofings upto and pitch end fixing with polymer upto any J or L hook bolts and nuts 8mm dia GI plain /bitumen rafters complete but excl the cost of purlins, rafters, trusses etc sheet shall bemanufactured out of 2400 TEX panel rovgis incorporating minimum 0.3% ultra violet stabilizer in system under approximately 2400 PSI and hot curved.They6 shall be of uniformly pigment conform to ISI 0192 and IS 12866 sheets shall be opaque or translucent clear or pigmentd texture or smooth 2mm thick flat

P/F of stainless steel railing made of hollow tubes channels plates etc incl welding grinding and making curvature and fitting same with necessary stain less nuts, bolts etc complete (RTQ)

Providing wood work in frames of doors windows clerestory windows and the frames wrought framed and fixed in position with hold fast lugs or with dash fasteners or required dia and length hold fast lugs or with dash faster shall be paid for separately Ist class kail wood

P/F of paneled or paneled and glazed shutters for doors , windows and celestory windows including ISI marked MIS pressed butt hinges bright finished of required size with necessary screws excl . paneling which will be paid separately all complete as per directions of engineer incharge 35mm thickness Ist class kail wood

P/F of 35mm thick wire gauze shutters using galvanized MS wire gauze of average with for aperature 1.4mm in both directions with wire of dia 0.63 mm for doors windows and celestory with hinges and necessary screws ISI marked MS pressed bright finished but hinges with necessary screws

P/F of paneling or paneling and glazing in paneled or paneled and glazed shutters for doors windows and celestory windows area of opening for panel inserts excl portion in side graves or rebates to be measured penelling for paneled or paneled and glazed shutters 25 to 40mm thick ISI class kail wood

Supply and fixing rolling shutters of approved make, made of required size M/S laths interlocked together through their entire length jointed together at the end locks mounted on specially for inside put side locking with push and pull operation complete including cost of providing and fixing necessary 27.5 cm long wire springs manufacture from higher tensile strength steel wire of adequate strength confirming to IS 4454 part I and MS top layer of required thickness for rolling shutters 80x0.90mm MS Laths with 0.90 mm thick top layer

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work ( hard and soft) wood

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work

Distempering with Ist class acrylic washable distemper( ready made) of approved manufacture and of required specifications

Providing and applying white cement putty of average thickness 1mm of approved brand and manufacture over plaster and wall surface prepora the surface even and smooth complete

Marble stone flooring with 10mm thick marble stone sample of marble shall be approved by engineer in charge over 20mm average thickness base of cement mortor 1:4( 1 cement 4 coarse sand laid and jointed with grey cement slurry incl rubbing and polishing complete with makrana white second quality)

Providing and fixing of ISI quality ceramic glazed tiles confirming to IS13753 of minimum thick ness 5mm of approved make like NITCO, ORIET,SOMAYKAJARIA or equivalent make in all colors shades except begundy, bottle green black of size as approved by engineer in skiting, risers of steps and dados over 12mm thick bed of cement mortor 113 (1 cement, 3 coarse sand and jointing with grey cement slurry @ 3.3 kg per sm incl pointing in white cement mixed with pigments of matching shade compelte

Providing and fixing of MS eves boarding 300mm wide incl MS angle backing incl priming coat of red oxide and painting with enamel synthetic paint of approved brand and manufacture (RTQ)

Providing and fixing of glass pans 4mm thick with wooden filtets incl cost of nails complete(RTQ)

Providing and laying of filter media effective size of sand varies from 0.45mm to 0.70mm having uniformity coefeeicient between 1.30 to 1.75 and should be dust free and free from other organic impurities be obtained from ganderbal Nallah and the size of gravel should vary from 2mm to 40mm in all carriages complete(RTQ)

Extra for providing and mixing water proofing materials in cement concrete work in doses by weight of cement as per manufacture specifications

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5

Providing and fixing G. I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as requiredcomplete as per direction of Engineer-in-charge.Made of G. I. wire of dia 4mm

supplying at site angle iron posts including spliting and bending of bottom for 8cms imcluding cost of primiring coat complete

Carriage of different materials from their respective source upto the site of work by mechanical transport:cement/steel 25kms

sand and bajri 20+40mm 35 kms

stone soling 21kms

bricks 25kms

Extra carriage of materials from dumping site to actual site of work for a distance of 50mtrs sand and bajri

stone soling

Bricks

steel 50 mtrs average

cement 50mtrs average

P/F of 100mm dia CI sluice valve with nuts, bolts complete job ( kirloskermake)(RTQ)

P/F of DI/CI sluice valve confirming IS 780 read with uptodate amendments standard make ( kirlosker/vag) meant for pipe gallery in filter beds required to be operated from operating plateform height 4.5m .Hence suitable arrangements for material operations to be provided the job includes P/F and fabrications of MS 6mm thick tail pieces as per site requirements nuts, bolts and seals the sluice valves should be filled with extension rods, pedestrial etc ( filter beds, inlet and outley) complete job (RTQ) 200mm dia

P/F of 80mm dia PVC under drainage laterals 8mm thick fabricated out of Korean foam or prince make with 9mm perforations as per design in the bed provided in 60° alongwith PVC Tees(RTQ)

Providing installation testing commissioning of double flanged MS pipes of 6mm thick.The job includes cutting welding and fabrication complete job: 200mm dia (RTQ)

100mm dia MS pipe

providing and fixing of 200mm dia bend (RTQ)

P/F of air blower(everest make or kay made) capable for providing compression @11.813 cum per minute @ 0.35kg/sm with suitable 3 phase induction motor with auxiliary pipe system upto filter beds pressure gauge nozzles cement concrete block base plate or check valves non return valves cement conc block in M-20 grade foundation bolts base frame complete job and other electrical controlling devices filtered on panel board complete job (RTQ)

Providing installation testing commission of kirlosker pumping equipments capable of lifting of 35cum per hour for a height of 20m with3 phase appropriate rating power induction mover with starter assembly suction and delivery pipe fittings of required size upto back wash tank the job includes all electrical operating devices fitted on pannel (RTQ)

P/F of mechanical equipment required for alum tank with electricity driven paddle assembly fitted with suitable reduction gear mechanism coupled with 3 phase electric motor 1HP capacity (kirlosker)/Crompton/greaves make) along with 40mm dia PVC pipe and PVC fitting upto point of application in the flash mixer alongwith washout arrangements plus 25mm dia GI inlet water line from back wash tank to alum tank with GI pipe specials and gate valves ( B-class pipe) incl. electrical (RTQ)

P/F of mechanical equipment required for bleach solution tank with electricity driven paddle fitted with suitable reduction gear mechanism coupled with 3 phase 1 HP capacity ( kirlosker/Crompton greaves make) along with 40mm dia PVC pipe and pipe fittings upto point of application in the flash mixer alongwith washout arrangements plus 25mm dia GI inlet water line from back wash tank to alum with GI pipe specials and gate valves ( B-class pipe) incl.(RTQ)

/F of MS rotating bridge fabricated out of ISA 50x50x6mm suitable for bearing silt load clariflucalator ( clafier radius 5.0m and flocculation chamber radius 2.5m.The job includes central bearing assembly shaft assembly MS wheels ) O-stop wheels end carriages with adequate rating primer mover 3 phase 440 volts 50 HZ including fly wheel plus MS rail ISLC 100 on fish plate grounted on top base of clarifluclator in cement concrete 6mm thick chequered flooring over full span of bridge the job includes providing and installation of 3 phase cubical electrical panel having capacity of 63 amp with one incoming feeder and one outgoing feeder incl. auxiliary system fitted with appropriate rating 3 phase MCCB, OCB and MLI ( L&T make starters for operation of electrical motors and end carriage system.the job also includes connecting pole(RTQ)

Providing installation testing commissioning of flash mixer assembly suitable for a dia of 0.70m comprising of SS churners box and operational gear to regulate the bleed complete job (RTQ)

Providing installation testing commissioning o 3 phase oil immersed 30kva voltage stabilizer (servo make) capable to operate incoming voltage of 180 volts and outgoing voltage of 410+10% volt. Complete job (RTQ)

P/L of 4 core 50mm aluminium cable to be laid service line from nearest L.T pole upto main panel board incl. to be laid undersigned (RTQ)

Providng and fixing installation testing commissioning of heating points in 2.5mm PVC copper wire (RTQ)

Providng and fixing installation testing commissioning of lighting points in 1.5mm PVC copper wire Led control type of handles/syska make of 12 watt incl push bottos etc complete job(RTQ)

Providng and fixing installation testing commissioning of Philips/havels make high mass GI octagonal poles including auto transformers connecting cables and other (RTQ)

Providng and fixing installation commissioning of exhaust fan in the chemical house complete job havels , Usha , Crompton , greaves make (RTQ)

Providing necessary earthing for motor lighting and heating networks as per prevailing electric rules with latest amendments with necessary medium inlcl. Refilling complete job ( electrode type) complete job (RTQ)

Providng and laying of shock proof 25mm thick matting of\ jyothi make (RTQ)

Providng and fixing of 50kva DG kirlosker green and cooled complete job (RTQ)

p/f of pipe specials if necciated during execution of work and as per direction of engineer incharge at site complete job

extra carriage of pipes from dumping site to actual site of work for a distance of 500mtrs s for 200mm dia DI

150mm dia (d.i)

G.I pipes

providing frixing of m.s gate with required angle iron frames, locking arrangements , hinges and all neccesary accessories inclding cost of priming coat

Providng and fixing of hume pipe 600mm with coller (RTQ)

Electrical sub-Station 100 KVA incl and conductor other allied fittings and fixture channel nuts ,bolts incl LT and HT poles and conductor complete job (RTQ)

MANZOOR AHMAD DAR