Additional/Alteration work in Medical Record Department (MRD), SMS Hospital, Jaipur. (Remaining Civil Work) (Supply of Furniture)

Amount

Supply of Executive Table with side credenza (Fantasy Series) Table: 2100 X 1050 X 750 mm Left side credenza: 1050 X 450 X 750 mm The table top would be made in four parts out of 50mm thick MDF board. One of the rectangular top is of (w x d) 1500 x 750mm and other top of (w x d) 1500 x 300mm and remaining top is of (w x d) 1050 x 300 mm. All the tops of table are laminated with 0.2mm thick membrane foil. The edges of the table are in step quarter round shape. Reverse side of top is laminated in matching color. The top is rested on one left side unit& two pillars with modesty panel. The modesty panel would be made out of 18mm thick MDF board and laminated with 0.2mm thick membrane foil. The pillars are also for design purpose. The bottom of table is provided with 50 mm molding in membrane finish.

Leftside unit : The top would be made out of 50mm thick MDF board with 0.2mm thick membrane foil. The edges of the top are in step quarter round shape. Reverse side of top is laminated in matching color. Side panels would be made out of 18mm thick MDF board laminated with 0.7mm thick curvica laminate on one side. All edges are sealed with 2mm thick pvc edge bending in matching color. The back side of the side unit would be made out of 18mm thick MDF board then laminated with 0.2mm thick membrane foil. Shutters of side unit would be made out of 18mm thick MDF board with 0.2mm thick membrane foil. The edges of the shutter are in quarter round shape. Reverse side of shutter is laminated in matching color. Three drawers are mounted on telescopic channel. Threeopenable shutterare provided with handles with lock.It has space for storage. The entire table & side unit is complete in all respects and made as per specification and as directed by engineer-in-charge. and Sample approved by Client Department

Supply of Executive Table with side credenza Table: 1800 X 750 X 750 mm (L x W x H) Right Credenza: 1050 X 450 X 750mm (L x W x H) The main table top surface made out of 25mm thick Particle board with half round shape post forming on front and the rear side with 0.6mm thick laminate pasted on it and the rest of the sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side. The top is rested on one both side two leg with modesty panel. The modesty panel would be made out of 18mm thick MDF board and laminated with 0.6mm thick matching all Flat edge duly sealed with1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. The main table top have one side round meeting top made out 25mm thick MDF board laminated with 0.2mm thick membrane foil. Side unit of size (w x d x h) 1050 x 450 x 750mm is provided with table. The Top made up of 25mm thick MDF board with half round shape post forming on front side with 0.6mm thick laminate pasted on it and the rest of three sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side.The side panel is 18mm thick pre laminated MDF board on both sides all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives)

Glue on through-feed edge-banding machine for better bonding of edges.All unit having three drawer & three hinge door, back and fixed shelves are made up of 18mm thick pre laminated MDF board Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges.Drawers are provided with full extension telescopic ball bearing slide channels. All the PVC edge beading should have press through 200 ° Temperature PUR glue by automatic through feed edge banding machine with corner rounding function. The side unit should contain adjustable screws is provided at the bottom of the legs for Level adjustment.Side unit including necessary hard-wares, handle locks etc.The entire table & side unit is complete in all respects and made as per specification and as directed by engineer-in-charge and Sample approved by Client Department

Supply of Executive Table with side credenza Table: 2100 X 750 X 750 mm (L x W x H) Right Credenza: 1050 X 450 X 750mm (L x W x H) The main table top surface made out of 25mm thick MDF board with half round shape post forming on front and the rear side with 0.6mm thick laminate pasted on it and the rest of the sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side. The top is rested on one both side two leg with modesty panel. The modesty panel would be made out of 18mm thick MDF board and laminated with 0.6mm thick matching all Flat edge duly sealed with1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. The main table top have one side round meeting top made out 25mm thick MDF board laminated with 0.2mm thick membrane foil. Side unit of size (w x d x h) 1050 x 450 x 750mm is provided with table. The Top made up of 25mm thick MDF board with half round shape post forming on front side with 0.6mm thick laminate pasted on it and the rest of three sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side.

The side panel is 18mm thick pre laminated MDF board on both sides all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges.All unit having three drawer & three hinge door, back and fixed shelves are made up of 18mm thick pre laminated MDF board Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges.Drawers are provided with full extension telescopic ball bearing slide channels. All the PVC edge beading should have press through 200 ° Temperature PUR glue by automatic through feed edge banding machine with corner rounding function. The side unit should contain adjustable screws is provided at the bottom of the legs for Level adjustment.Side unit including necessary hardware’s, handle locks etc.The entire table & side unit is complete in all respects and made as per specification and as directed by engineer-in-charge and Sample approved by Client Department

Supply of Storage unit The top of unit would be made out of 50mm thick MDF board having density 500-800kg/m3, laminated with 0.2mm thick membrane foil. The edges of the top are in quarter round shape. Reverse side of top is laminated in matching color. Side panels would be made out of 18mm thick particle board having density 600-900kg/m3, laminated with 0.7mm thick curvica laminate on one side. All edges are sealed with 2mm thick pvc edge bending in matching color. The back side of the side unit would be made out of 18mm thick MDF board having density 500-800kg/ m3. It is grooved with CNC router for design purpose and then laminated with 0.2mm thick membrane foil. Shutters of side unit would be made out of 18mm thick MDF board having density 600-900kg/m3, laminated with 0.2mm thick membrane foil. The edges of the shutter are in quarter round shape. Reverse side of shutter is laminated in matching color. All shelves would be made out of 18mm thick particle board having density 600-900kg/m3, laminated both side with 0.7mm thick curvica laminate. All edges are sealed with 2mm thick pvc edge bending. All drawers are mounted on steel telescopic channel and Sample approved by Client Department

Size : 2400 x 450 x 2100mm (L x D x H)

Size : 1400 x 450 x 750mm (L x D x H)

Supply of Computer Table Table: 1975 X 600 X 750 mm Main Table & Top Surface: The main table top surface made out of 25mm thick MDF board with half round shape post forming on front and the rear side with 0.6mm thick laminate pasted on it and the rest of the sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side. The top is rested on one both side two leg with modesty panel. The modesty panel would be made out of 18mm thick MDF board and laminated with 0.6mm thick matching all Flat edge duly sealed with1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Common Drawer unit: The drawer unit of size 725 x 380 x 450mm (H X W X D) made out of 18mm thick pre-laminated MDF board, having two number of drawer units, the one top units of 6” depth each and the bottom drawer of 15” depth. The front shutters matching with top surface in quarter round post formed shutters and mounted on steel telescopic channels including necessary hard-wares, handle locks etc. Accessories: Provision with each seat one keyboard tray ( Metallic ), CPU trolley ( Metallic ) and as above Sample approved by Client Department

Supply of Storage unit with openable Shutter Size : 1950 x 450 x 750mm (L x D x H) The structure is made out with 18mm thick prelaminated MDF board with 1.3mm thick PVC edge banding of matching colour having total 2 partitions for storage provided with 1 nos. of fixed shelves There is a 2” skirting provided in the bottom area. The top of the unit is made of 25mm thick MDF board duly post formed having half round shape on the front edge and rest of the sides edge banded with 1.3mm thick PVC Edge Banding of matching colour. The unit is duly covered with 4 nos. of openable shutters made out with 18mm thick prelaminated MDF board finish all four sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side.The side panel is 18mm thick pre laminated particle board on both sides all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All shutter fitted with auto close hinges, handles, lock and all other hardware/accessories as per design and Sample approved by Client Department]

Supply of Storage unit with openable Shutter & drawer Size : 2500 x 450 x 2100mm (L x D x H) All storage made out with 18mm thick prelaminated MDF board with 1.3mm thick PVC edge banding of matching colour having total 5 partitions for storage provided with 4 nos. of fixed shelves There is a 2” skirting provided in the bottom area. Storage unit center part having 2 open part & 4 nos. of drawer runningwith telescopic channel. The unit is duly covered with 6 nos. of openable shutters made out with 18mmthick prelaminatedMDF board finish all four sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side.The side panel is 18mm thick pre laminated particle board on both sides all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All shutter fitted with auto close hinges, handles, lock and all other hardware/accessories as per design and Sample approved by Client Department

Supply of Computer Table with pedestal & keyboard tray Metalic Table : 1050 X 525 X 750mm Table Top: The table top of size 1050 x 750mm would be made out of 25mm thick prelaminated MDF board finish all four sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side.The side panel is 18mm thick pre laminated particle board on both sides all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Front Cover: The front cover of the table is made of 18mm thick particle board board matching with the color of the tabletop. Legs: The top is supported by pedestal unit on one side and an 18mm thick particle board leg on the other side. The leg is edge banded with 1.5mm thick PVC Edge Banding Pedestal Unit: The drawer unit of size 725 x 380 x 450mm (H X W X D) made out of 18mm thick pre-laminated board, having three number of drawer units, the one top units of 6” depth each and the bottom drawer of 15” depth. The front shutters matching with top surface in quarter round post formed shutters and mounted on sliding channels including necessary hard-wares, handle locks etc and Sample approved by Client Department

Supply of Executive Chair High back revolving with neck rest : Providing executive revolving chair, chair with high back support with neck rest, chair base made out with ms chrome finish and chair moving at bottom with five nos. of twin castor wheel duly made with nylon plastic with injection molding process.Chair seat and back structure duly made with medium density foam covered with PU leatherite tapestry, chair having two nos. of arm made with PP finish and fix at seat with the help of chromed steel screw.Chair having seat adjustment gas lift function and Sample approved by Client Department

Supply of Visitor chair : Providing visitor chair, chair with medium back support chair, chair base made out with metal frame finish . Chair seat and back structure with medium density foam covered with PU latherite tapestry, chair having two nos. of arm. and Sample approved by Client Department

Supply of Officer Chair Medium back revolving : Providing executive revolving chair, chair with medium back support, chair base made out with ms chrome finish and chair moving at bottom with five nos. of twin castor wheel duly made with nylon plastic with injection molding process.Chair seat and back structure duly made with medium density foam covered with PU leatherite tapestry, chair having two nos. of arm made with PP finish and fix at seat with the help of chromed steel screw.Chair having seat adjustment gas lift function. and Sample approved by Client Department

Supply of Officer Chair Low back revolving : Providing office revolving chair, chair with low back support chair base made out with MS chrome plated finish and chair moving at bottom with five nos. of twin castor wheel duly made with nylon plastic with injection molding process. Chair seat structure duly made with medium density foam covered with fabric tapestry, Chair back duly made with net tapestry chair having two nos. of arm made with PP base and fix at seat with the help of screw. Chair having seat adjustment gas lift function.and Sample approved by Client Department

Supply of Sofa : Providing sofa, sofa structure duly made with steel duly cut, welded and chromed with semi glossy finish, sofa internal structure duly made with mango/pine wood and fix at steel structure with rhe help of self tapping steel screw, sofa having medium density foam and all foam duly covered with PU leathrite tapestry, sofa having in bottom four nos. of nylon steps for anti skid on floor and Sample approved by Client Department

Size : 1880 x 785 x 730 (L x D x H)3- seater

Size : 865 x 785 x 730 (L x D x H)1- seater

Supply of CORNER TABLE Size : 450 x 450 x 450mm (L x W x H) Table top made out with 25mm thick MDF board laminated finish. The top is fixed with fixed on four supporting pillars top surface. Four supporting pillar : The whole table is supported on four pillar of and equal size which are made out of 18mm thick MDF board laminated with laminate sheet all four vertical edges and flat edge duly sealed with 1.5mm thick PVC edge banding of matching color. Pillar having slotted groove for provision to fixed the center shelf. Table having one center shelf made out with 18mm thick MDF board laminate with laminated sheet and flat edge duly sealed with 1.3mm thick PVC edge banding of matching color and Sample approved by Client Department

Supply of Office Steel Rack- Stainless steel SS 202 grade rack 36" x 15” x 60" with 3 shelves of 20 guage having four compartment structure will be made up of 32mm (+/- 4mm) square stainless steel pipe with bottom shoe and Sample approved by Client Department

Supply of 2 seater visitor chair made of MS ERW crome plated with 2 Arms. Cross Beam made up black powder coated rectangular M.S. ERW tube having 8 +/-0.03cm x 4 +/-0.03cm x 0.2 +/-0.016cm size. Leg and armrest :- chrome palted made of cold rolled steel with 0.12+/-0.013cm thickness. Seat back shell 1.6mm thick powder coated shhall made from cold rolled M.S. sheet 0.16+/-0.013cm thickness. The side bar is made of chrome plated solid steel 3+/-0.03cm x 1.2+/-0.3cm. The shell is assembled on the cross beam with help of M8 Bolts. Chair seat height 365mm, seat size : 520mm W x 425mm D, Back size : 520mm W x 500mm H, Overall Size(in mm) L 1220 X D 760 X H 790 and Sample approved by Client Department

Supply of Table Top Float Glass of Thickness 8 mm with Tapered edges on all sides Complete in all respect as per direction of engineer in charge and sample approved by Client department

Supply of Acrylic Sheet signage having sheet of stainless prime sheet S.S. grade 304, (a) Design type :- Customized (b) Color :- Customized (c) Dimension :- Customized (for all sizes) (d) Thickness :- 14 gauge complete in all respect as per drawing and design provided by Engineer in charge and Sample approved by Client Department