SPECIAL REPAIR TO 16 QUARTERS OF B-3 AND B-4 BLOCK IN VIVEK VIHAR COLONY UNDER GE (WEST) LUCKNOW

Amount

M & L for brick work using fly ash brick conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) including demolition of brick work or stone/boulder masonry built in CM all as specified and directed

M&L 15 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished fair and even all as specified.

M & L 15mm thick rendering on brick work in CM 1:4 with liquid water proofing compound as per manufacturer's instructions finished even and fair complete all as specified. NOTE- WPC shall be measured & paid separetly.

M&L 15 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished fair and even including taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water etc all as specified.

M & L 15mm thick rendering on brick work in CM 1:4 mixed with liquid water proofing compound (ISI marked) @ as per manufacturer’s instructions, finished even and fair including taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water etc all as specified. NOTE- Liquid WPC shall be measured & paid separetly.

Supply only liquid water proofing coumpound

M&L 5 mm thick rendering in CM (1:3 ) on ceiling surfaces, finished fair and even including taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water etc all as specified. all as specified.

M&L preparation of New plastered surface of walls and applying two coats of oil bound distemper over and incl one coat of birla white wall care putty complete all as speicifed .

Complete removal of existing treatment on wall (any number of layers ) by scrapping with steel scrappers or any other means, including filling depression of scrapped surfaces and applying 1 mm thick wall care putty upto smooth surface and over two coats of oil bound distemper complete all as specified.

M&L for preparation of new ceiling surface and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old ceiling surfaces and applying two coats of white wash complete all as specified and directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.

M & L for Providing and applying minimum 1mm thick wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed.

Material & Labour for preparation of old plastered surfaces of finished walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine (Mechanical means)

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm and removing from site as directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame)exc 1.50 Sqm and n.exc.4.00 sqm and removing from site as directed.

M&L Pressed steel door frame of size 105mm x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc completeas specified and directed.

M&L Pressed steel door frame of size 125mm x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified and directed.

M&L plain cement concrete cast in situ 1:3:6 type C1 using 20 mm graded stone aggregate as in copings ,hold fast,back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work all as spcefied and directed

S & F of factory made Plain framed 35 mm thick panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated 2nd class hard wood rail and style complete all as directed.

Supply and fixed 35mm thick factory made hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (devided into panels with plane sash bars any numbers) edges of framing plan, chamfered or rounded, fitted without sash barss (As specified on SSR part-I, section 8, clause 8.24 (a) all as specified and directed.

M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.

Supply & fix MS Butt hinges "medium weight" cold rolled mild steel 100mm size as directed.

Supply & fix 150mm long alumunium anodised barrel tower bolts of extructed section as directed.

S & F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pan as directed.

Supply & fix stainless steel wire cloth 0.36mm minimal dia of wire and average width of aperture 1.4mm fixed with stanless steel staples to windows.

Supply& fix MS ordinary pattern spring "plate type" including roller & roller plate complete as directed. Make -"Ritz"

S&F aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified.

M&L preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete as directed.

M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F 15mm bore steel water tubes "medium grade" galvanized with all fittigs such as bends, elbows tee etc and fixed to walls and ceiling in floor incldg taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site all as specified.

S&F 20mm bore steel water tubes "medium grade" galvanized with all fittigs such as bends, elbows tee etc and fixed to walls and ceiling in floor incldg taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site all as specified.

S&F 15 mm bore CP brass centre hole basin mixture quarter turn with U shape round casted spout with 450mm long braided hoses fixed to GI pipe complete all as specified and directed. Make ESSCO Jaquar Cat NoTQT516A/Hindware Cat No F280009CP

S&F Brass Chromium plated hot & cold water wall mixer 2 in1 system wall unit with over head shower arrangement with hot and cold valves cast copper alloy heavy duty screwed down for iron pipe and fixed complete all as specified . Make ESSCO Jaquar Cat NoTQT517B/Hindware Cat No F280018CP/Parryware G3316A1

S&F in repair 15 mm bore stop valves/angle valve copper alloy, fancy type,chromium plated half turn with screwed down, high pressure with crutch or butterfly handle screwed both ends fixed to GI pipe complete all as specified and directed.

Supply & Fixing in repair 15mm bore PVC connection 450mm long with brass coupling and washer as directed.

Supply & Fixing in repair copper alloy long body bib taps chromium plated suitable for 15mm bore pipe with capstain head complete all as specified.

Supply & Fixing in repair gun metal gate valve screwed both ends to 20mm bore pipe complete all as specified.

Supply & Fixing in repair CP shower rose fancy type125mm thick with or without swivel joints any size including fixed to steel pipe or union as directed.

S&F in repair vitreous china Wash basin, white, flat back type of size 550x400mm including CP waste coupling and 32mm dia waste pipe and fixing of 02 nos brackets made out of 40x40x5mm MS angle iron etc. complete all as specified and directed.

S&F in repairs PVC valveless symphonic action dule type low level flushing cistern (ISI marked) of 10 litre capacity connected to water closet with inlet, ball valve, float and handle complete all as specified.

S & F in repair vitreous china Water closet pedestal pattern with sheet cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts, flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe etc complete all as specified and directed.

S & F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.

Supply & fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

Supply & fix in repair CP Brass Tabular Towel Rail, 20mm dia D type 60cm long between flanges.

S&F glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed by Engineer-in-charge.

S&Fin repair PVC (SWR) pipes in any length fixed to wall 110 mm bore complete all as directed.

S&Fin repair PVC (SWR) pipes in any lenth fixed to wall 75 mm bore complete all as directed.

S&F PVC bends 110 mm bore complete all as directed.

S&F PVC bends 75 mm bore complete all as directed.

S&F PVC (SWR) branch piece, single (single Y), equal or unequal suitable for 110mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y), equal or unequal suitable for 75mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

S&F PVC (SWR) vent cowls suitable for 75mm bore pipes complete all as specified and directed.

Supply and fixed in repair 75 mm dia PVC nahani trap with CP grating including jointing to waste pipe fixed in cement concrete.

Dismantling floor, hearth or wall tiling including cement mortar bedding , removing and rubbish off the premised etc.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L for glazed ceramic colour tiles of size ( 350 x450mm ) x 7mm thick in walls etc, set & joints in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over 10mm thick rendering in cm 1:4 complete.

M&L for Non skid ceramic colour floor tiles shade as approved size 7-8mm thick area of each tile exc 0.11 but n exc 0.18Sqm set on 15mm thick in near cement screed(1:6) slurry and pointed incl white or colour cement to match complete all as specified and directed

M& L for Vitrified tiles double charged 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

S&F vitrified tiles, coloured, superior quality 8 to 10mm thick (square/ rectangular) polished, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 and dismantling of existing tiles complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring 18 to 20 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed

M&L for machine cut kota stone 18 to 20mm thick for one as in steps, risers, skirting, dado etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix stone complete all as specified and directed.

S & F in repair hand shower (health faucet) with 1 m long flexible tube suitable for hot and cold water supply including wall hook, bracket etc complete set of superior quality complete all as specified and directed.

Demolition of PCC in ground floor and paving exc 15cm thick and below or above ground level complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

M&L providing and injecting chemical emulsion along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc. in apron.

M& L treating of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement morter 1:2 (1 cement :2 coarse sand) to match the existing floor.

Demolition of RCC in ground floor and paving exc 15cm thick and below or above ground level complete all as specified.

M&L RCC 1:2:4 type B1 using 20mm graded stone agg in RCC lintel, shelves, RCC Parapets and the like including necessary form work complete all as specified.

M&L Mild Steel TMT bars 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 complete all as directed.

Supply & Fixing in repair sink with drainage board size 410x330x160mm made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe all as specified and directed.

S&F in repair fancy type 25mm dia stainless steel curtain rods with including bracket/junctions /wall to wall/ fancy lattu of best quality as approved by Engineer-in-Charge.

M&L for cement concrete type B1 1:2:4 (20 mm graded aggregate) plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, provided , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

S&F PVC cabinet shutter as in Kitchen, Cub board, wardrobe etc with suitable frame including shelves in required sizes at site made out of 18 mm thick one side decorative lamination & other side balancing lamination sheet & provision of shutter made out of 18 mm thick one side decorative laminated PVC sheet all required brackets stainless steel screw etc the panels shell be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bend finish including all necessary fitting as per site requirement and as per make and specification mentioned complete all as specified and directed. Note:- Density of PVC solid sheet should not be less than 575 kg/M3 Make: CENTURY PLY/ RAJSHREE plastic wood/Sintex.

Supply and fixing 30 mm width of flaps continuous piano hinges Stainless steel, bright finish or electroglavanised complete all as specified and directed.

S&F ball cateches with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters.

S&F 100mm long Stainless steel, hasp and staple, safety type, with SS steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed.

Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical PIDIPROFF LW of Dr Pidilite as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Bath seal tape product of Dr fixit and grouting around the inserted pipes byu porable Dr fixit bath seal grout as directed. (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Dr fixit as per amnufacturer instructions in sunken slab over brick bat . (g) Fill the sanitary gaps with Dr. Fixit sealing compounds complete.

M&L for 75 mm thick Cement concrete PCC 1:4:8 type D-2(using 40 mm graded granite stone aggregate) in sub base of flooring as specified and directed

S&F in repair Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed in bedding layers in CM 1:6 including dismantling old u/s chequered tile complete all as specified and as directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone agg as in cover slab for man holes, drains, soak well etc and similar articles etc, set in CM 1:6 with plain faces including chamfered weathering throating etc incl necessary form work and including demolition of old reinforced concrete of any description in any postion not otherwise specifically provided far complete all as specified and directed.

Taking up broken existing sewer line of any depth and replacing sewer pipe with SGSW pipe upto 200mm bore including jointing of pipe in CM 1:1, haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40mm graded brick agg incl necessary excavation and earth work, disposal of material up to a distance of 50mtr and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bell, bell push, light fitting etc for taking credit and making good disturbed surfaces of walls, floors, etc. as directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

(a) One light/fan point controlled by one switch

(b) One socket outlet point 5 Amp on an independent board

(c) Same as item no 90 (b) but on the same board

(d) Call bell / buzzer point controlled by one bell push

(e) For one light point controlled by two 2-way switches, with cable 1.5 sqmm

All as item no 90 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board.

S & F switch piano flush button single pole one way 5 Amp 240 volt complete as directed.

Ditto as item 97 but using 15 Amps complete all as specified.

S&F switch piano flush button single pole two way 5 Amp 240 volt complete as directed. Make:- Anchor penta PC deluxe /Cona/Havells reo

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete as directed.

S & F socket outlet flush type 5 pin 5 Amps 240 volts complete as directed

S & F ceiling rose surface bakelight two to three terminal complete as directed

S&F bell push single pole one way 5 Amp socket outlet point on an independent board .

S&F Call bell AC single pole 230 Volts Ding dong complete all as specified and directed.

S&F angle type holder insulated body with back plate suitable for batten fittings as directed.Make:- Anchor penta/Cona/Havells reo

S&F fan regulator electronic, step up socket type, , 230 volt and conection complete all as directed

Supply and fixing in repairs LED lamp 7/9 watt, complete all as specified and as directed.Make: HAVELLS with cat Part No. LHLDEUEEML8R007,Make: Surya with cat Part No.9 W NEO MAX LED LAMP ,Make: C&S Chandra Series with cat Part No.LTHPLEDLAMP7WB22BULB

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite cat no BN 021 LED 12S 6500/4000 PSU GR/SI or/Havells LUMILINE PLUS cat no LUMILINE+BS10WLED865SPCSS/ HPL Neptune plus 10 w HLPT51510CW

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge. Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI orHavells LUMILINE PLUS cat no LUMILINE+BS10WLED865SPCSS/ Bajaj LED batten BCLAB 20W WH LED P

S& F in repair Decorative wall light fixture wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make Phillips Model Grace or / Havells decorative model Floretine WL 1LS B22 SS PPCP cat no LHFOAJE1TN1I060 ( Note: Rates incl 01X 7/9 W LED Bulb with each fitting)/Jaquar lighting

S&F LED building/street security light 25/ 30 Watt with high power LED source (>110lumen/watt) PDC housing, IP65/66 with 4 KV inbuilt surge protection driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts. Make: HAVELLS(ENDURAPERAL) with cat Part No.ENDURAPERALSL25WLED757SSYTOPCMP, Make: C&S (Indus Series) with cat Part No.LTESS25WLED/LS, PHILIPS(GREENLINE SMART) with cat Part No BRP042LED25CWR1S1PSU GR

Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Make: Philips Vista glow ordering code : WT140W LED7S NW PSU S1 PC./ Bajaj wee plus cat no BIBWP 6W LED/

S&F in repairs of surface type round LED 15W downlighter all as per specified and directed. Make: Havells Integra neo (surface) cat part no: IntegraneosurfaceDLS15WLED840S/ Phillips sleek surface SM250 & SM251 (Circular)/ Bajaj sleek surface LED cat no. BGSLO SLEEK SURFACE 12W WH RD

M&L for two single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

S&F in repairs double door VTPN 4 way double door suitable for 4 pole MCCB 63-100A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties,earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed by Engr-in-charge. ( Note: MCCB & MCB to be measured and paid seprately)

S&F in repairs MCCB 63-100 Amps 415 volts, 4 pole 16 KA breaking capacity complete as directed. Make: Legrand/Hager/Schneider

S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 12 ways 240 volt with 200 Amps rated bus bar made out of 16 Gauge sheet steel double door complete all as specified. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’)

S&F MCB SPN 32 to 63 Amp 240 volts 10 KA breaking capacity complete as directed.

S&F MCB SP 10 to 32 Amp 240 volts 10 KA breaking capacity as directed.

Taking down electric meter and refixing on new board after rewiring in replacement of unservicable all as directed.

S & F of ceiling fan 1200 mm sweep, BEE star rated (40-48 Watt), Min air delivery 215 CFM, copper wound motor, AC single phase, 230/240 volt, white colour complete with blades, down rod 300mm long, canopy and provn of connection with 3 core flexible copper cable of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed. Make:- Havells ES 40 /Usha Technix plus/Orient energy star

S&F of exhaust fan single phase, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed. Make : Havells/Crompton/Bajaj. Note:- Old ceiling fan shall be deposited in AGE E/M yard for BER action.

M & L for making opening in brick wall 230/460mm thick built in cement mortar and making good surface with cement mortar 1:3 including all necessary nuts, bolts, washers etc complete all as specified and as directed.

M & L for earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 5 of MES SSR Pt-I 2009 print and as directed.

Supply and laying or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheathed 25 sq mm 4 core stranded conductor nominal cross sectional in service connection including disconnection/taking out old unserviceable existing cable all as specified. Make: Richa/Polycab/Gloster.

Excavation in trenches, not exceeding 1.5 m wide and n. exc 1.5 m in depth for laying of cable for soft/ loose soil and getting out all as specified.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm apart for soft/loose soil all as specified.

M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed.Note: Punned thickness shall be considerd for measurment purpose

M & L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable all as specified and directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

M & L for galvanised steel tubing 40 mm bore light grade laid in trenches, road crossings pole/wall etc. for cable protection including providing MS flat iron 50mm x 6mm clamps (02 Nos) complete all as specified and directed including taking down the existing UNSV steel tubing. Make: Jindal/TATA/Nezone

Cutting of existing roads for laying of under ground cable and making good to disturbed surface as per existing specifications not exceeding 0.9 mtr in depth all as specified and as directed.

S & F energy saving environmental friendly die-cast aluminium flood light with IP-66 of capacity 90 watts 5700 K with high power LEDs and toughened glass suitable for single phase 50 Hz AC electric supply including takiing down old unsv HPSV/FTL flood lights all as per specified and as directed. Make: Havells cat part No ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO or equivalent in Bajaj/CG.

rajan construction (BID ID -3157466)

M/s Chandra Mohan and Sons (BID ID -3158113)

M/s A S Associates (BID ID -3156694)