SPL REPAIR TO BLDG NO P-347 (COOK HOUSE) OF 18 SIKH REGT AND OTHER SANCTIONED WORKS UNDER GE (WEST) JALANDHAR CANTT

Amount

Demolition of PCC in Ground floors and paving not exceeding 15cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection finished even and smooth (without using extra cement), complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

All as per item No 4.00 above but except bricks etc

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for 20 to 25 mm thick machine cut kota stone slab on floor, step etc over and incl 20 mm thick bedding layer CM 1:6 including roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust including brushing neat cement slurry @ 3kg/sqm with pigments to match the shade of slab including cutting, rubbing and mirror/granite finish polished, complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per ser item No. 09 above but as in skirting over and including 10mm thick cement plaster in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles of size exc 0.18 Sqm and not exc 0.36 Sqm, 7-8 mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 450x300x7 mm thick laid over and including 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls, finished fair and even, complete all as specified and directed.

M&L for 5mm thick Rendering in CM 1:3 on brick work or concrete surfaces on ceiling finished even and smooth without using extra cement etc complete all as specified and directed.

S&Fin repair vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding complete all as specified and directed.

Dismantling of CI pipe 100 mm dia, jointed in cement mortar and taking off from trench complete all as specified and directed.

Dismantling of CI pipe 75 mm dia, jointed in cement mortar and taking off from trench complete all as specified and directed.

S&F 100 mm dia cast iron drain pipes in any length with or with out ears, with cement joints, fixed to walls complete all as specified and directed.

S&F 75mm dia cast iron drain pipes in any length with or with out ears, with cement joints, fixed to walls complete all as specified and directed.

S&F CI Bends of 100mm bore dimnishing pieces or tapers complete all as specified and directed.

S&F CI Bends of 75mm bore dimnishing pieces or tapers complete all as specified and directed.

S&F CI vent cowl of 75mm complete all as specified and directed.

M&L for cast iron floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F Salt-glazed stoneware gully traps, square or round mouthed, type 'P' size 125x100 mm, complete all as specified and directed.

S&F stack clamps out of 50mmx 5mm flat iron and 16mm dia round iron stays , including bolts and nuts and securing ends of stays to wall and roof add fixed complete all as specified and directed.

S&F in repair PVC floor trap size 75/100mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed.

S&F medium grade steel water tubing, 15 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections complete all as specified and directed.

S&F medium grade steel water tubing, 20 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections complete all as specified and directed.

M&L for Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S&F Flush pipe of polyethylene of low or high denisty or PVC 32 mm Dia for low level cistern etc complete all as specified and directed.

S&F in repairs waste coupling of PTMT (half or full threaded). (Minimum weight 32mm-45gm/40mm-60gms) complete all as specified and directed.

S&F in repair PVC connection fiber, reinforced 45cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified and directed.

S&F in repair fancy type, brass chromium Plated stop valves/Angle valves, cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel sheet 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L for chromium plated long body bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed as in repairs including taking down old tap of any description complete all as specified and directed.

S&F in repair Vitreous China Wash Basin with full pedestal, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed.

S&F in repair 15mm dia fancy type Pillar taps, cast copper alloy with capstan heads Chromium Plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe but fancy type etc complete all as specified and directed.

Supply & fixing in repairs rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Supply & fixing in repairs rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F in repair 20mm stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

Taking down chowkats or frame not exc. 1.5 sq m each with shutters (without taking off shutters from the fames)

Taking down chowkats or frame exc. 1.5 sq m but not exceeding 4 sq m each with shutters (without taking off shutters from the fames). Complete all as specified and directed.

Supplying and fixing Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mmx25mm single rebated comprises of glazed and skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf -01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. Note: Wire gauge/glass shall be measured and paid for separately.

All as per description of serial item No. 47 above but in gauged shutters without sash bars complete all as specified and directed.

S&F Steel ventilator, fixed type with glazing bars complete all as specified and directed.

S & F framed work such as grills, gratings, etc .with ends of bars shouldered and/ or riveted , or forget into spikes ; framed guard bars barallel iron doors and similar work conforming to Fe.290.Gde-E-165. Complete all as specified and directed.

S&F structural steel framed work as in doors frame or gates, hold fast etc. of angle or other section with gusset plates, rails, braces etc. Cutting, drilling and welding complete, drilled for fixing of steel sheeting or other covering. Doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed.

Dismantling structural steel work including doors, gates, flats and MS round bars but excluding framed truss etc complete all as specified and directed.

S&F mild steel black sheet 1.25mm thick in wall cladding welded steel gates and similar work including round headed screws clout nails or rivet and fixed wood or steel framing with plain 40mm lap joints or weled including bending or turning up mitred angles etc as required complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed.

M&L for prepration of new steel surfaces of any description not otherwise described over 10 cm width or grith and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

S&F factory made plain, framed, 35 mm thick 2nd class hard wood paneled shutters (any number of pannels), with pannels of timber flat on both sides (feather edged), or of veneered particle board medium denisty , wood particle board with commercial face veneers; supplied and fixed to chowkhats complete all as specified and directed.

S&F factory made 2nd Class Hardwood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F PVC solid door frame of size 50mm x 47mm made out of 5 mm plain/colour PVC sheet to be matched with shutter, reinforced with MS square tube, as per specification and drawing in SSR Part-II complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification & drawing complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for PVC 19/20mm cupboard shutter one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified and directed.

M&L for 3.00 mm thick glass sheet, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and directed.

M&L for preparation of new wood surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer, complete all as specified and directed.

S&F Butt hinges 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F Aluminium handles 125mm , cast type, annodised all as specified and as directed.

S&F aluminium anodised 200mm, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F aluminium anodised 100mm, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 300mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete add fixed in repairs complete all as specified and directed.

S&F Aluminium alloy annodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering complete all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) removing surplus spoil out of Defence Land complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in benching, padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges complete all as specified and directed.

M&L for applying on the roof surface with a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/sqm over a coat of primer @ 0.3 litre per Sqm complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with five layer polyster non wove fabric ( wt. Not less than 150 gms/sqm) land on bitumen coted surface by forced application complete all as specified and directed.

M&L for 40 mm thick brick tiles laid on mortar and joints grounted flush in cement mortar 1:3 complete all as specified and directed.

All as per Item No 77.00 above but except brick tiles (cleaning of old brick tiles shall be included).

M&L for flush pointing in cement mortar 1:3 on brick tiles laid flat on roof surfaces etc complete all as specified and directed.

M&L for PCC 1:2:4 Type B0 ( 12.5 mm graded stone aggregate) as in bed blocks, coping, etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of White Wash on ceiling etc complete all as specified and directed.

M&L for prepration of old surfaces of ceiling and applying two coat of white (lime) wash on ceiling complete all as specified and directed.

M&L for preparation of new plastered surfaces and distempering walls with two coats of distemper oil emulsion, white or tinted over and including 1mm thick wall care putty including primer, complete all as specified and directed.

M&L for prepration of old decorated surfaces of walls, washing rubbing down and stoping of distempered and painted surfaces and applying two coat of oil bound distemper complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over and including a coat of primer, complete all as specified and directed.

M&L for complete removal of existing treatments by washing, rubbing down and stopping etc on wall surfaces and applying two coats of cement base paint over and including one coat of primer complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor or fixed on brick walls 110 mm dia fixed in repairs including all fittings complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal in radius 110 mm bore complete all as specified and directed.

Dismantling plain corrugated asbestos /translucent sheet in roof covering incl ridges complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa and finishing with resin coat on both surfaces @ 150 gm/sqm of coating as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section, in any position complete all as specified and directed.

S&F Rolled mild steel section as in joist, chanel, angle, or tee section fixed independently without connecting plates, etc (cut to ordinary length i,e within 20mm of the length indicated) of Fe-410w(Gde-E-250) quality A complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation as specified and directed.

M&L for 100 mm thick PCC type D-2 1:4:8(using 40mm graded stone aggregate) as in sub base flooring complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of 60 cm thickness M35 Grade complete all as specified and directed.

Surface preparation : Chipping of 50mm average thickness of unsound/weak concrete material from slabs, beams, columns ets, with manual chiesel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts complete all as specified and directed.

M&L for Anti corrossive coating: Clean the rebars using the rust remover chemical if there is any rust existing, otherwise clean the rebar free of foriegn material. Mix the base and hardener of the anti-corrossive coating like Nitozine primer of Fosroc or equivalent mechanically using a slow speed hanvy duty drilling machine fitted with mixing paddle. Apply the mixed materials to the cleaned rebar and allow it to dry complete. The rate shall include the cost of all the operations etc complete all as specified and directed. Note : The bars which are badly corroded has to be strengthen by providing new bars of same specification by means of welding or binding. The reinforcing bar shall be measured and paid separately under appropriate item.

M&L for Epoxy jointing compound: Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-in-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make.

M&L for Polymer modified mortar: Providing, mixing and applying 25 mm average thickness in 2 layers of SBR polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment : The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm). 25 mm average thickness in 2 layers

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

S&F 50mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in floor, wall & spout etc complete all as specified and directed.

S&F mild steel continuous (piano) hinges, 40mm width of flaps (when open), bright finish or electrogalvanised complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft soil complete all as specified and directed.

Removing excavated materials (soil) not exceeding 50m and depositing where directed of a level not exceeding 1.5m above the starting point, complete all as specified and directed.

M&L for cement concrete type D2, 1:4:8(using 40mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed.

M&L for factory made machine pressed precast concrete interlocking paver block, 80mm thick, any shape and size, confirming to IS-15658-2006, M-40 Grade, with grey cement and no pigment complete all as specified and directed.

M&L for factory made machine pressed precast concrete interlocking paver block, coloured 80mm thick, any shape and size, confirming to IS-15658-2006, M-40 Grade, with grey cement and pigment, complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in sides of rounded or chamfered on edges complete all as specified and directed.

Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors

Taking down unserviceable Submain of any size as directed.

Taking down main switch / DB as directed.

M & L for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire including pressed steel sunken boxes for mounting of MODULAR TYPE switch/sockets and regulator and including modular type cover plate white colour all as specified and directed for: One light / fan / call bell point controlled by one, one way switch.

One 3 pin socket out let 5 Amps on same board.

One 3 pin socket out let 5 Amps on Independent board.

All as per item No 116 above but with 2.5 sqmm multistranded copper conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board

S & F switch MODULAR 6 Amps, flush button type, SP, one way, 230 Volts, AC

S & F switch MODULAR 16 Amps, flush button type, SP, one way, 230 Volts, AC

S & F socket out let multipurpose MODULAR 5 pin 6 Amps, flush type, 230 / 250 Volts

S & F socket out let multipurpose MODULAR 5 pin 6/16 Amps, flush type, 230 / 250 Volts

S & F MODULAR fan regulator step type 120W, 02 module complete all as specified and directed.

M & L ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified.

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

M & L for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of 25mm in size complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire.

Supply and fix MCB DB, TPN 6 way double door Vertical type suitable for mounting of MCCB as incomer with suitable 200 amps rated bus all as specified and directed.

Supply and fix MCCB 63 Amps 4 pole 415 Volt,25 KA breaking capacity .

Supply and fix DB,double door, SPN 8 way for MCB, 240 volt with 200 amps rated bus bar.

Supply & fixing MCB SPN 32 to 63 Amps 240 volts

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20A complete all as specified and directed.

S&F in replacement LED tube light fitting 20W Box type including LED lamp 22 W with 2200 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed.

S&F LED mirror light 10 Watt 2 feet complete all as specified and directed.

Supply and fixed LED Decorative wall light complete with fitting & fixtures of cap 10 Watt all as specified and directed.

Supply & fixing in replacement LED Bldg security light fitting 35 Watt including LED lamp pressure die cast aluminum IP66 with surge protection device of 10KV, IK7 LED (SEOUL) 6500K and connecting electrical to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50 mm 3 core including GI pipe 32mm light grade 0.9 Mtr long bent to L shape in 02 Nos of GI Clamps of size 25x6 mm of length 25mm with nuts, bolts and washers complete complete all as specified and directed.

Supply & fix Exhaust fan Metalic body, Heavy duty, AC 230/240 V, 1400 RPM of size 450 mm sweep, incl making opening in wall for fixing the exhaust fan complete all as specified and directed.

Supply and Fix PVC Conduit pipe Heavy Grade of size 32 mm with all accessories like (Bend/Tee/Junction box) complete all as specified and directed.

Taking down existing Ceiling fan/Exhaust fan capacity/type carefully and refixing the same complete all as specified and directed.

M&L for earthing complete with GI steel earth plate electrod 60x60cmx6.00mm thick bouried directly in ground /earth pit not less than 2.25m deep below the ground level with top edge of the plate not less than 1.5 m below the normal ground level connected to test point by using GI wire of dia 4 mm as earthing lead soldering/revated to earth plate at one end and connected DB by means of nut, bolts etc complete with PCC pit (1:3:6) type GI cover with handle funnel with watering pipe wire mess GI protection pipe for earthing lead all complete as specified and as per electric plate No.5 of SSR Part I

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed , galvanized steel strip or wire armored, electric power cables (heavy duty)of size 10 sqmm 4 core with cable gland including taking down old unserviceble cable complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep for laying of cable, pole foundation, etc including taking out old brick cable protection cover and getting out forming bottom surface to required gradient complete all as specified and directed.

Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified and directed.

M& L for Sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as directed.

M & L Bricks, common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of UG cable.

Supply, installation & commissioning MCB Load Distribution board TPN 4 way double door, for mounting DP/ SP/TP/ MCBs/MCCBsas Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet complete all as specified and directed.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning TPN 40 To 100 AMP complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning SP 6-32 AMP complete all as specified and directed.

M & L for sub main wiring with two single core PVC insulated and unsheathed cable 4 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit not less than 25mm in size complete with all accessories alongwith provn of 4 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire.(Three runs of cable and one run of conduit shall be measured as one length) complete all as specified and directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 2.0 TR complete all as specified and directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5 TR complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.0 KVA complete all as specified and directed.

M/S Kuldip Construction Co. (BID ID -3125889)

SARASWATI CONSTRUCTION CO (BID ID -3134621)

M/S RAJESH CONSTRUCTION COMPANY (BID ID -3128968)