Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.0 LAccepted-AOC C 56 6 ANAND VIHAR COMMERCIAL COMPLEX MAHOLI ROAD MATHURA UP PIN 281004 | MATHURA | UTTAR PRADESH | 281004 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹15.6 L+₹28,590 (1.87%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder. | |
| 3 | L3₹17.9 L+₹2.6 L (17.3%)Rejected-Finance 37 TILAK NAGAR MATHURA 281001 | MATHURA | MATHURA | UTTAR PRADESH | 281001 | L3 | Rejected-Finance Not Lowest Bidder. | |
| 4 | L4₹35.2 L+₹19.9 L (130.5%)Rejected-Finance 0 0 BASANT AVENUE PHASE II PUNJAB GURDASPUR PUNJAB 143505 | GURDASPUR | PUNJAB | 143505 | L4 | Rejected-Finance Not Lowest Bidder. |
| Sl No | Description | Qty | Unit | VIJAY ENTERPRISES L4 | M/s A.K. ENGINEERS L3 | Ms Kamal Kant Agarwal L1 | M/S S S CONSTRUCTION L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of hollow shaft (vertical shaft) electric induction motor 75 HP, three phase, 415 volts including disconnection of electric connections and lifting with the help of EOT crane, dismantling of discharge head and outlet pipe connections complete all as specified and directed. | 3 | Each Job | 5,000 ₹15,000 | 2,000 ₹6,000 | 1,500 ₹4,500 | 1,000 ₹3,000 Lowest |
| 2.00 | Lifting of VT pump set 75HP Make - WPIL, Model No. 5GM 12 TC, from 40 Mtr depth (approx.) including 200mm dia column pipe, shaft assembly, dismantling the pump set complete with the help of EOT crane and other T&P as required at site complete all as specified and directed. | 3 | Each Job | 12,000 ₹36,000 | 5,000 ₹15,000 | 2,500 ₹7,500 | 1,500 ₹4,500 Lowest |
| 3.00 | Labour for lowering of VT pump set 75HP Make - WPIL, Model No. 5GM 12 TC, upto 40 Mtr depth (approx.) including 200mm dia column pipe, shaft assembly, with the help of EOT crane and other T&P as required at site complete with replacement of wornout/rusted nuts and bolts, painting to column pipe with one coat of rubber based paint, complete commissioning and testing for 8 Hrs continuous to entire satisfaction of Engineer-in-Charge complete all as specified and directed.
(Note:- Parts required to be replaced will be measured and paid separately.) | 3 | Each Job | 12,000 ₹36,000 | 5,000 ₹15,000 | 3,000 ₹9,000 | 1,500 ₹4,500 Lowest |
| 3.01 | Supply & replacement line shaft stainless steel confirming to SS-410 grade 10 feet (3.048 Mtr) long of 38.1 mm dia made by machining in lathe of single piece stainless steel as per size and allingment complete all as specified and directed. | 10 | Each | 8,500 ₹85,000 | 7,000 ₹70,000 | 4,000 ₹40,000 | 1,500 ₹15,000 Lowest |
| 3.02 | Supply & replacement line shaft sleeve confirming to SS-410 grade 10 feet (3.048 Mtr) long of 38.1 mm dia made by machining in lathe of single piece stainless steel as per size and allingment complete all as specified and directed. | 10 | Each | 2,500 ₹25,000 | 2,500 ₹25,000 | 1,500 ₹15,000 | 1,200 ₹12,000 Lowest |
| 3.03 | Supply & replacement line shaft coupling confirming to SS-410 grade 10 feet (3.048 Mtr) long of 38.1 mm dia made by machining in lathe of single piece stainless steel as per size and allingment complete all as specified and directed. | 10 | Each | 1,800 ₹18,000 | 1,800 ₹18,000 | 900 ₹9,000 Lowest | 2,000 ₹20,000 |
| 3.04 | Supply & replacement bearing retainer of bronze 200 mm dia flange type with all rubber packing nut and bolts of existing size complete all as specified and directed. | 12 | Each | 4,500 ₹54,000 | 4,000 ₹48,000 | 3,000 ₹36,000 Lowest | 4,000 ₹48,000 |
| 3.05 | Supply & replacement top shaft (head shaft) of 38.1 mm dia, 2.75 Mtr long of stainless steel confirming to SS-410 grade made by machining in lathe of single piece steel shaft as per the size and allingment complete all as specified and directed. | 3 | Each | 6,500 ₹19,500 | 6,000 ₹18,000 | 3,500 ₹10,500 | 2,500 ₹7,500 Lowest |
| 3.06 | Supply & replacement bottom line shaft 1.5 Mtr long of 38.1 mm dia stainless steel confirming to SS-410 grade made by machining in lathe of single piece steel shaft as per the size and allingment complete all as specified and directed. | 3 | Each | 4,500 ₹13,500 | 5,000 ₹15,000 | 4,000 ₹12,000 | 2,500 ₹7,500 Lowest |
| 3.07 | Supply & replacement discharge head of existing pattern and size 200 X 200 mm made of CI complete all as specified and directed. | 2 | Each | 1,50,000 ₹3,00,000 | 10,000 ₹20,000 | 5,500 ₹11,000 | 3,000 ₹6,000 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
2 Oct 2025, 6:00 pmClosed
Maj Sarith E
GE (WEST) MATHURA
REPAIR MAINT OF VT PUMPS MONO BLOCK PUMPS AND ALLIED SERVICES AT RADIAL WELL UNDER GE WEST MATHURA
2025_MES_729481_1
8300/1336/E8
Open Tender
Civil Works
Item Rate
180 days
GE (WEST) MATHURA
AS PER NIT
10 documents required · 10 mandatory
₹500
GE (WEST) MATHURA
₹90,000
Yes
27 Nov 2025
4 Sept 2025
9 Oct 2025
4 Sept 2025
2 Oct 2025
18 Sept 2025
Amount
Dismantling of hollow shaft (vertical shaft) electric induction motor 75 HP, three phase, 415 volts including disconnection of electric connections and lifting with the help of EOT crane, dismantling of discharge head and outlet pipe connections complete all as specified and directed.
Lifting of VT pump set 75HP Make - WPIL, Model No. 5GM 12 TC, from 40 Mtr depth (approx.) including 200mm dia column pipe, shaft assembly, dismantling the pump set complete with the help of EOT crane and other T&P as required at site complete all as specified and directed.
Labour for lowering of VT pump set 75HP Make - WPIL, Model No. 5GM 12 TC, upto 40 Mtr depth (approx.) including 200mm dia column pipe, shaft assembly, with the help of EOT crane and other T&P as required at site complete with replacement of wornout/rusted nuts and bolts, painting to column pipe with one coat of rubber based paint, complete commissioning and testing for 8 Hrs continuous to entire satisfaction of Engineer-in-Charge complete all as specified and directed. (Note:- Parts required to be replaced will be measured and paid separately.)
Supply & replacement line shaft stainless steel confirming to SS-410 grade 10 feet (3.048 Mtr) long of 38.1 mm dia made by machining in lathe of single piece stainless steel as per size and allingment complete all as specified and directed.
Supply & replacement line shaft sleeve confirming to SS-410 grade 10 feet (3.048 Mtr) long of 38.1 mm dia made by machining in lathe of single piece stainless steel as per size and allingment complete all as specified and directed.
Supply & replacement line shaft coupling confirming to SS-410 grade 10 feet (3.048 Mtr) long of 38.1 mm dia made by machining in lathe of single piece stainless steel as per size and allingment complete all as specified and directed.
Supply & replacement bearing retainer of bronze 200 mm dia flange type with all rubber packing nut and bolts of existing size complete all as specified and directed.
Supply & replacement top shaft (head shaft) of 38.1 mm dia, 2.75 Mtr long of stainless steel confirming to SS-410 grade made by machining in lathe of single piece steel shaft as per the size and allingment complete all as specified and directed.
Supply & replacement bottom line shaft 1.5 Mtr long of 38.1 mm dia stainless steel confirming to SS-410 grade made by machining in lathe of single piece steel shaft as per the size and allingment complete all as specified and directed.
Supply & replacement discharge head of existing pattern and size 200 X 200 mm made of CI complete all as specified and directed.
Supply & replacement shaft adjusting nuts complete all as specified and directed.
Supply & replacement coupling key complete all as specified and directed.
Supply & replacement packing box bearing complete all as specified and directed.
S&F in replacement of MS column pipe heavy duty ISI marked both end flanged of 200 mm bore, 7.0 mm of minimum thickness, of length 10 Feet ( 3.048 Mtr) long suitable for 200mm dia VT pump sets including nuts & bolts complete all as specified and directed.
S&F in replacement MS column pipe heavy duty ISI marked both end flanged of 200 mm bore, 7.0 mm of minimum thickness, of length 1.5 Mtr long suitable for 200mm dia VT pump sets including nuts & bolts complete all as specified and directed.
Dismantling of bowl assembly water lubricated type of 5 Stage, 200 mm dia, 75 HP VT pump transporting to civil workshop for repair and after repair installation of same at its original location including commissioning and testing after replacement of unserviceable parts. Contractor shall get spare parts of the bowl assembly from the WPIL/authorized dealer and shall produce the voucher for the same complete all as specified and directed. (Note :- Spare parts shall be measured and paid separately.)
Supply & replacement pump shaft of stainless steel 410 Grade complete all as specified and directed.
Supply & replacement suction case of cast iron complete all as specified and directed.
Supply & replacement suction case bearing bronze complete all as specified and directed.
Supply & replacement closed impeller bronze with seal ring complete all as specified and directed.
Supply & replacement impeller lock collet complete all as specified and directed.
Supply & replacement intermediate bowl CI complete all as specified and directed.
Supply & replacement intermediate bowl bearing bronze complete all as specified and directed.
Supply & replacement intermediate bowl bearing rubber complete all as specified and directed.
Supply & replacement discharge case of cast iron complete all as specified and directed.
Supply & replacement discharge case bearing of bronze complete all as specified and directed.
Supply & replacement bowl stud complete all as specified and directed.
S&F in replacement of thrust bearing (Cat No 29324E, Make : SKF) suitable for vertical type hollow shaft induction motor of capacity 75 HP including grease complete all as specified and directed.
S&F in replacement of ball bearing (Cat No 6316, Make: SKF) suitable for vertical type hollow shaft induction motor of capacity 75 HP including grease complete all as specified and directed.
M&L for rewinding of electric vertical shaft (hollow shaft) Squirrel cage induction motor, 75 HP, 3 phase, 50 Hz AC, 1500 RPM with super enamelled copper wire of suitable existing gauge including all insulating materials, varnishing including any lathe machine work complete assembling, connecting and testing on full load complete all as specified and directed.
Lifting of Borewell pump motor set 5HP to 20 HP from 40 Mtr depth (approx.) including and upto 100mm dia column pipe, shaft assembly, dismantling the pump set complete with the help of chainpully block and other T&P as required at site all complete all as specified and directed.
M & L for cleaning of borewell of size 150 mm to 250 mm with the help of air compressor and water jet by overflowing the silt deposited in the borewell without damaging the exiting casing pipe and perforated pipe any size of depth upto 60 mtr and disinfecting the borewell with the help of calcium hypochlorite based granulars. Note:- (i) Borewell will be cleaned till the entire satisfaction of JE/Engr-in-Charge. (ii) Cost of water bozer required for overflowing the silt will be included in the quoted rate.
Lowering of Borewell pumpmotor set 5 HP to 20 HP upto 40 Mtr depth (approx.) including and upto 100mm dia column pipe, shaft assembly, with the help of crane and other T&P as required at site complete with replacement of wornout / rusted nuts and bolts, painting to column pipe with one coat of rubber based paint, complete commissioning and testing for 8 Hrs continuous upto satisfaction complete all as specified and directed. Note:- Nut bolts, paint and T & P required to be replaced will be included in the quoted rate.
Supply, fixing and installation PVC Pipe 10 Kg/cm2 pressure of size 100 mm in replacement of old rusted broken PVC pipe of size 100 mm and jointing by socket, bend, tee or any type of PVC fitting all as specified and directed by Engr-in-Charge.
Supply, fixing and installation PVC Pipe 10 Kg/cm2 pressure of size 50 mm in replacement of old rusted broken PVC pipe of size 50 mm and jointing by socket, bend, tee or any type of PVC fitting all as specified and directed by Engr-in-Charge.
S&F in repair of PVC Moulded junction box with front openable hinged type door and locking arrangement with provision of cable inlet and outlet opening at bottom fixed to base outdoor type weather proof with 02 Nos of aluminium bus bar current capacity 10 Amps fixed on procelain insulated and 01 Nos of 2.5 Amps and one earth duly embedded in junction box for out going street light inluding nuts, bolts, glands, and lugs etc. complete all as specified and directed.
Supply and greesing new greese AP-3 in centrifugal / VT Pumps & motors complete all as specified directed.
Supply and toping up lubricating oil 20W40 in VT motors for thrust bearing complete all as specified directed.
Labour and T&P for attending and rectify electric faults by skilled electricians of non functional control pannel, starter, motor, MCCB, identifying and recitfying and recity the electric faults, tightening electric loose connections, cabel connections to make the plant functional complete all as specified directed.
M&L for replacement of gland packing to stop leakage of water from pumps/sluice valves/NRV of size up to 250mm dia complete all as specified directed.
Dismantling the existing unserviceable burnt Auto transformer of 75 HP capacity from Its existing position by disconnecting all electrical connections including drainout all old transformer oil and transportation for rewinding to workshop with existing gauge of aluminium winding wire including topping up transformer oil not more then 12 litre and refixing the same after winding on same position including connection testing complete all as specified directed.
Dismanting of existing oil immersed auto transformer starter 75 HP capacity and reassembling the same after replacement of the following parts:-
Set of fixed contact
Set of moving contact
Set of fixed and moving auxillary.
Set of base plates
Set of current bar assy. (L1, L2 and L3).
Set of current bar assy. (A, B and C).
Thermal overload relay
Thermal by metal timer
Set of auxillary switch
S&F in replacement Terminal connection plate suitable for 75HP 3PH of Vertical Turbine motor complete all as specified and directed.
Taking out old unserviceable Non release valve from 400mm dia pipe and S&F new cast iron Non release valve of 200mm size with two air outlets and fixing on 400mm dia bore MS pipe including nuts, bolts washers complete all as specified and directed.
Taking out old unserviceable Non release valve from 400mm dia pipe and S&F new cast iron Non release valve of 100mm size with two air outlets and fixing on 400mm dia bore MS pipe including nuts, bolts washers complete all as specified and directed.
Taking out old unserviceable air release valve from 400mm dia pipe and S&F new cast iron air release valve of 100mm size with two air outlets and fixing on 400mm dia bore MS pipe including nuts, bolts washers complete all as specified and directed.
S&F in replacement PVC insulated and unsheathed multistrand copper conductor cables 1100 volts grade of size 70 sqmm single core complete all as specified directed.
S&F in replacement of copper lugs, thimbles, bottel lugs of 70 Sqmm size complete all as specified directed.
S&F in replacement of Post Top Lantern into Integrated Solar Street Light - 16 Watts the system shall include FRP housing Hi-brightness W-LED (120-140 lumens per watt) operating voltage 11.1/12.8V, IP-65 complaint driver efficieny 85% to 90% CRI > 70 CCT 5000 to 6500 kelvin toughen glass/acrylic cover MPPT/PWM base charge controller with hi-efficency LED driver designed with/without dimming function as per IEC complaint Hi-efficiency 28/30 WP Mono crystalline Solar Panel, 15.4 AH Lithium battery - DOD 90 to 95% with inbuilt PCB as per BIS complaint dusk to down operation working temperature (-) 10 degree C to (+) 55 degree C, weight 6-7 kg with adjustable powder coated MS clamp suitable for pole/wall mounting protection short circuit, over load reverse polarity and battery protection complete with GI iron pipe 65 mm dia, medium grade, 5 mtr high excluding 1 mtr planting depth with aluminium painted foundation of pole with PCC (1:3:6) using 20 mm graded stone aggregate of size 450 x 450 x 1000 mm deep including necessary earthwork complete all as specified and directed.
M&L fo steel base frame to hold the rotar and discharge head connection of 75 HP VT pump as per existing stand installed at radial well all as specified and directed by Engineer-in-Charge.
Supply & replacement of steel cushon anti vibration pad suitable for 75 HP VT pump complete all as specified and directed by Engineer-in-Charge.
M&L for repair of Control panel of Crane of capacity 5 Ton, with control wiring with suitable size of copper cable, replacement of damaged burnt out connectors, fuse holders, main power contactors, over load relays, phase cards, power diodes, integrated circuits, auxilaury switches, HRC fuse carrier 32A, 20A, 16A, including replacement of break, thruster breakes, cadmium compound for wire ropes, replacement of Push Buttons with NO/NC elements of EOT Cranes and making serviceable of Crane complete all as specified and directed.
M&L for removing of old paint from EOT crane alongwith panel board and accessories with chain pully block, servicing and greasing complete crane with chain pully block and painting the same with two coats of synthetic enamelled paint as existing colour over a coat fo red oxide primer complete all as directed.
M&L for scraping out old paint from rising mains and delivery pipe lines and preparation of surfaces of pipes by applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
supply and fixing in replacement of cosmic star delta starter of capacity 75 HP including electrical connection, lugs, thimbes etc required at site complete all as specified and directed. Make : Havells / L&T / C&S
S&F in repair contactor 80 Amp, 4 pole, 415 Volt with AC coil, cns-65 as per existing including electrical connection complete all as specified & directed. Make : Havells / L&T / C&S
S&F in repair thermal over load relay 70 Amp (auto/manual) as per existing complete all as specified and directed.
S&F in repair star delta starter timer as per existing complete all as specified and directed.
M&L for in replacement contactor MNX 110 including fixing of all necessary connections complete all as specified and directed.
Supply & fixing single phase motor 2780 RPM of capacity 0.75 KW / 1HP, pressure booster pump rated discharge approx 1500 LPH at rated head 40 m suction discharge of pump 25x25 mm alongwith pressure tank of capacity 24 litre including taking down old unserviceable pressure pump motor of capacity 1 HP complete all as specified and directed.
Supply, laying, testing and commissioning LT cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, elecric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 120 sqmm 3.5 core including taking down old unserviceable cable complete all as specified and directed.
Supply & fixing in replacement MS Saddle suitable for cable of 120 sqmm 3.5 core alongwith nuts, bolts of suitbale size laid in bridgs/structure complete all as specified and directed.
M&L in replacement starter 30HP with direct on line submersible pump PSE18 soft starter three phase star delta fully automatic 30 HP, overload relay range 32-104 (Amp) equivalent to ABB 1SFC132369M9901 or equivalent in make specified in Appendix 'B' complete all as specified and directed.
Labour and T&P for lifting of submersible pump set 30HP from 60 Mtr depth (approx.) including column pipe, Submersible cable complete with the help of chainpully block and other T&P as required at site transporting to civil workshop for repair & back after repair, lowering including replacement of rubber sheet, nuts & bolts connecting to existing system and testing on full load complete all as specified and directed.
M&L for rewinding submersible motor 30 HP three Phase, 415 volts, 50 Hz A/C with insulated copper wire of existing gauge including all insulating materials, complete assembling, connecting and testing on full load complete all as specified and directed.
M&L for rewinding and refixing after rewinding the same motor of Centrifugal pump of capacity 25 HP, three phase 415 volts, 50Hz AC with super enameled copper winding wire of suitbale size and gauge including insulating material, heating drying,re-assembling and testing complete all as specified and directed by Engineer in Charge.
Labour and T&P for lifting of submersible pump set 2 HP to 30HP from 60 Mtr depth (approx.) including column pipe, SB cable complete with the help of chainpully block and other T&P as required at site transporting to civil workshop for repair & back after repair, lowering including replacement of rubber sheet, nuts & bolts connecting to existing system and testing on full load complete all as specified and directed.
Dismantling of submersible pump & motor of any capacity, any description and replacement of worn out/rusted nuts & bolts, reassembling after repair, connecting and testing all as directed. Note : (i) Rate of taking down of old unserviceable spare parts shall be included in quoted rate of this item. (ii) Supply of spare parts shall be measured and paid seperately under respective items.
Supply only PVC impeller suitable for 2 HP SB pump complete all as specified and directed.
Supply only SS impeller suitable for 5 HP SB pump complete all as specified and directed.
Supply only SS impeller suitable for 7.5 HP SB pump complete all as specified and directed.
Supply only SS impeller suitable for 10 HP SB pump complete all as specified and directed.
Supply only SS impeller suitable for 15 HP SB pump complete all as specified and directed.
Supply only complete shaft sleeve (Bush) suitable for 2 HP SB pump complete all as specified and directed.
Supply only complete shaft sleeve (Bush) suitable for 5 HP SB pump complete all as specified and directed.
Supply only complete shaft sleeve (Bush) suitable for 7.5 HP SB pump complete all as specified and directed.
Supply only complete shaft sleeve (Bush) suitable for 10 HP SB pump complete all as specified and directed.
Supply only complete shaft sleeve (Bush) suitable for 15 HP SB pump complete all as specified and directed.
Supply only SS impeller suitable for 20 HP SB pump complete all as specified and directed.
Supply only SS impeller suitable for 30 HP SB pump complete all as specified and directed.
Supply only complete shaft sleeve (Bush) suitable for 20 HP SB pump complete all as specified and directed.
Supply only complete shaft sleeve (Bush) suitable for 30 HP SB pump complete all as specified and directed.
M&L for rewinding submersible motor 2 HP, single phase, 230 volts, 50 Hz A/C with insulated copper wire of existing gauge including all insulating materials, complete assembling, connecting and testing on full load complete all as specified and directed.
M&L for rewinding submersible motor 5 HP, three phase, 415 volts, 50 Hz A/C with insulated copper wire of existing gauge including all insulating materials, complete assembling, connecting and testing on full load complete all as specified and directed.
M&L for rewinding submersible motor 7.5 HP three Phase, 415 volts, 50 Hz A/C with insulated copper wire of existing gauge including all insulating materials, complete assembling, connecting and testing on full load complete all as specified and directed.
M&L for rewinding submersible motor 10 HP three Phase, 415 volts, 50 Hz A/C with insulated copper wire of existing gauge including all insulating materials, complete assembling, connecting and testing on full load complete all as specified and directed.
M&L for rewinding submersible motor 15 HP three Phase, 415 volts, 50 Hz A/C with insulated copper wire of existing gauge including all insulating materials, complete assembling, connecting and testing on full load complete all as specified and directed.
Supply & fixing / lowering in replacement of uPVC / HDPE pipe heavy duty ISI marked of size 100mm dia, complete all as specified and directed.
Supply, install and testing in replacement monoblock pump motor copper winding 1.5KW/2 HP all as specified and directed. Note: Old submersible pump will be deposited to AGE E/M (W) Yard after removable.
M&L for in replacement starter 5HP with direct on line submersible pump starter three phase star delta fully automatic 5 HP, 3.7 KW, overload relay range 9-13 (Amp) complete all as specified and directed.
M&L for in replacement starter 10HP with direct on line submersible pump starter three phase star delta fully automatic 10 HP, 7.5 KW, overload relay range 17-25 (Amp) complete all as specified and directed.
M&L for in replacement starter 15HP with direct on line submersible pump starter three phase star delta fully automatic 15 HP, 11 KW, overload relay range 23-32 (Amp) complete all as specified and directed.
M&L for maintenance and up keeping of all pump, motor and LT panels install inside any pump station the contractor is deemed to provide following:- (i) Checking and maintenance of all connections gauges etc all pump sets 50 HP capacity and endorse the status in register. (ii) Checking and maintenance of voltage meters, Amp meters and checking of RYB phase indicators, CTS incl all electrical connection of LT panel incl endorse the status in register. (iii) Checking and maintenance of leakage of transformer oil from starters all connections of moving auxillary, contacts coil, relays etc in all respect of oil immersed and electronic starters. Cont/-
Cont/- (iv) Arresting of leakage from pumps, sluice valves by filling gland etc and make the pump set leak proof. (v) Maintaining the allingment of pumpsets, maintaining the vibrations by filling necessary gland packing and allied works for avoiding the loss of pump sets due to mechanical faults and electrical faults to prevent the motor winding burning, damage of pump shafts, coupling, casing of pump sets etc and restrict the abnormal sounds in pump sets. Cont/-
Cont/- Note: (a) The necessary gland packing, rubber insertion sheets, insulation tape, grease, oil and nut bolts of any size shall be provided by the contractor and rates quoted deemed to. (b) T&P helpers for repair and maintenance are responsibiltiy of contractor without any extra cost. (c) Any defect found and not intimated by the technician, penalty of Rs. 5000 or cost of defect rectification which one is feasible will be accounted.
M&L for in repair of LT panel by replacement of the following items:- Note:- Panel shall be repaired by skilled technician having good knowledge of panel.
Copper cable PVC single core unarmoured unsheathed of size 25 Sqmm.
Copper cable PVC single core unarmoured unsheathed of size 2.5 Sqmm.
CT, resin casted of current ratio 400/5 Amp, burden -15 VA, accuracy class 1.0
Phase indicator R,Y,B as per existing size and shape.
Electronic timer-minilac
Terminal plate 06 Nos
Single Phase preventer
Copper lugs, thimbels, bottel lugssize of 25 Sqm
Contactor 25 Amps as per existing
Relay suitable for starter 10 to 15 HP-Minilac
M&L for rewinding submersible motor 30 HP three Phase, 415 volts, 50 Hz A/C with insulated copper wire of existing gauge including all insulating materials, complete assembling, connecting and testing on full load complete all as specified and directed.
M/S S S CONSTRUCTION (BID ID -3441061)
M/s A.K. ENGINEERS (BID ID -3435535)
VIJAY ENTERPRISES (BID ID -3435108)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .