PROVIDING CHAIN LINK FENCING USING TIN SHEET CHAINLINK FOR MAIN FARM AT INSTITUTE OF HORTICULTURE PECHIPARAI

Amount

EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc., complete complying with standard specifications.

PLAIN CEMENT CONCRETE 1:3:6 (One cement three M.sand and six aggregate) using 40mm gauge hand broken hard granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing of MS angles of best & approved quality including necessary cutting, bending, welding, transportation and placing in position with proper alignment including one coat of red oxide primer etc., Complete complying with standard specifications and as directed by the departmental officers.

Supplying and Fixing of approved quality of chain link of size 2" x 2" using 10 gauge galvanised iron wire (all sizes) for tying in the pattern as per the drawing supplied using 12 gauge G.I. wire / binding wire etc., complete complying with standard specifications and as directed by the departmental officers.

Supply of GI barbed wire of 2 ply 4 pronged of 10 gauge includingcost of transportation, taxes etc., Complete as directed by the departmental officers.

PAINTING NEW IRON WORKS with two coats of Enamel paint of approved quality and colour over a priming coat with approved quality of red oxide primer. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification. (The paint to be used should be got approved by the executive engineer before use on work.)

Supplying and fixing of Zinc corrugated sheet of 04mm thick with approved brand and quality and including cost of necessary 'J' bold, Nut, Cub washer, Bitumen washer etc., Complete as per standard specification and as directed by the departmental officers