Special repairs to Bldg No. T-220/01 to 08, provn of washing point with overhead shelter and provn of 01 x urinal and toilet in the AoR of AGR B/R-II, Kapurthala under GE Kapurthala.

M&L for 15mm thick Rendering in CM 1:4 on brick work or concrete surfaces finished even and smooth etc complete all as specified and directed.

M&L for vitrified ceramic tiles light shade tiles 9-10 mm thick (square/rectangular) polished, area of each tile not exc 0.36 Sqm in vertical surface such as skirting dados and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 10 mm thick cement rendering in CM (1:4) complete all as specified and directed by Eng in Charge

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia.

M&L for reinforced cement concrete Nominal mix Type B-1 (1:2:4) using (20mm graded aggregates) in Slabs supported on walls, beams and columns in floors, roofs, landings, Chajjas, balconies, canopies, deck slabs and in the shelves and the like complete all as specified.

S&F 4.00mm thick sheet glass in repair, ordinary quality in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed by Engineer-in-charge.

S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty all as specified.

S&F 75 mm UPVC pipes in repair single socketed in any length laid in floor complete all as directed by Engineer-in-Charge.

S&F 75 mm UPVC bend complete all as directed by Engineer-in-Charge.

S&F 75 UPVC junction single,(single T) equal or unequal complete all as directed by Engineer-in-Charge.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engineer-in-Charge.

S&F 110 mm UPVC bend with complete all as directed by Engineer-in-Charge.

S&F 110 UPVC junction single,(single T) equal or unequal complete all as directed by Engineer-in-Charge.

S&F 110mm UPVC vent cowl.

S & F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent , cement

Supply and fixing 100 mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for nominal bore.

Dismantiling water tank PVC 500 Ltrs and removing from site

S&F rotational moulded polythelene water storage tanks cylindircal water tank for hoisted and fixed in postion of 500 ltrs capcity incl fittings and as directed by Engr-in-Charge

S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs

S& F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms)

S&F PVC cupboard frame of size 75mm x 40mm with wall thickness of 5mm made out of extruded 5mm thick Prelam PVC sheet reinforced with 15mm x 15mm M.S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos. of 150mm long brackets of 10mm x 10mm M S square tubes. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners complete all as specified and directed

S&F factory made PVC cupboard shutter flush type of 25mm thickness consisting of panel of hollow PVC profile of 12mm x12mm inserted all around the hollow profile section and insert one 10mm x 10mm MS tube in the centre of this section and lipped with 10mm thick(5mm x 2) and 12mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof waterprrof and fire retardent printed PVC sheet using solvent cement on both sides of panel.

M&L for plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified.

M&L for 75mm thick PCC 1:3:6 type C2 as in plinth protection finishing the surface even and smooth with out using extra cement complete all as specified and directed.

S&F alumunium hinges for PVC door shutter,cupboards size of hinges in 100mm

Supply & fix 40 mm dia cupboard knobs of brass duly polished, with nuts, screw and washer of mild steel bright finished complete all as specified.

Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.

M&L for 25mm thk PCC 1:2:4 type B-1 using20mm graded agg as wearing coat for laying floor finishes, finished fair to receive tiles.

M&L for 75mm th PCC 1:4:8 type D-2 as in sub base, Floors, Paving finished even and fair complete all as specified.

M&L for magnetic type catch fixed with screws to door frame complete all as specified and directed by Engr-in-Charge

M&L for 100mm thick Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete or in sub base of floors complete all as specified and directed by Engr-in-Charge.

M&L for sand filing under floors or in foundations including watering and consolidation

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658 - 2006 of 80mm thick ness, M-40 grade with grey cemet and pigment over sand cushioning complete all as specified.

M&L for reinforced concrete 300 mm dia pipe class NP-2 laid & jointed complete with collars, complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in surface channel and benching for manholes and haunching around manholes frames including necessary form work and finishing exposed surfaces even and smooth without using extra cement.

M&L for machine cut kota stone for flooring ,staircase 18-20mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in CM 1:6 as specified and directed by Eng-in-Charge.

Supply only integral water proofing compound.

One light point controlled by one, two way switch

Supply only liquid water proofing compound.

Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.including LED lamp 09 Watt.

Demolition and breaking up 300mm bore dia drain pipe (salt glazed ware, AC or reinforced cement concrete) set in cement mortar.

Cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in bed of RCC NP-2 pipe 300mm bore including packing under and haunching against the sides of pipes after laying and testing complete all as specified

Soakage well excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80m x 3.0m effective depth

M&L for 5 users on site LLDPE conventional Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. complete

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out , returning filling in layers not exceeding 25cm including watering and ramming and removing surplus earth to a distance not exceeding 50 metre complete all as specified.

Material and labour for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and directed.

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 10 Sqmm 2 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge.

Plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified.

Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick using excavated soil.

Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge

One light point controlled by one, one way switch

One fan point controlled by one, one way switch

Per 1000 Nos

One socket outlet 3 Pin, 5 Amp on independent board

One socket outlet 3 Pin, 5 Amp on same board.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :-

S&F switch piano flush type single pole one way 5 Amp (ISI Marked)

S&F switch piano flush type single pole one way 15 Amp (ISI Marked)

M&L for point wiring with 4.00 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board.

S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked )

S&F socket out let 2 in 1, 3 pin 5 Amp flush type (ISI Marked)

S&F switch piano flush type single pole two way 5 Amp.

S&F Bell push flush type single pole one way 5 Amp

Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked)

Supply, installation, testing and commissioning Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make: Crompton/ Bajaj/ Philips

One bell point controlled by one bell push

Taking down old unserviceable wall mounting fitting & supply & fix decorative wall mounting type made up of polycarbonate rings, and glass shade with lamp holders, connectors block, 1 x 09 watt LED Bulb, glass fitted engineering plastic B22 D lamp holder with electrical copper contacts, set screws, polycarbonate diffuser in opal finish for soothing light effect, LED 09 watt etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Cat part No LHDL03160099

Taking down old unserviceable bulkhead fitting & supply & fix LED light fitting 1x9 watt/1x10 watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge,

Supply and fix LED Bldg security light fitting 35 W housing made out of die cast aluminum alloy with toughed glass, IP 65/66 protection havin

g clamp for mounting on wall working on 240 V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40 mm dia light grade GI pipe bend to shape. complete all as specified and as directed. Make : Wipro/Havells/Bajaj.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and connecting up and including provision of twisted three core PVC insulated flexible cord of 0.75 Sqmm copper conductor of required length from ceiling rose/connector to fan complete all as specified and directed.

S&F in replacement Exhaust fans of 230 Volt 300 mm sweep ventilator DB bouble ball bearing heavy duty motor, metal blade with protection steel bird guard and roubst complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specirfied and directed( Make-BAJAJ, HAVELLS, USHA or equivalent )

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers cutting of the holes in existing wall and making good the surfaces all as directed .

Supply and fixing gun metal globe or gate valve with iron wheel head, screwed both ends for 15 mm bore iron pipe and fixed in position complete all as specified and as directed.

All as per description of Srl item No 1 here-in-before but 15 mm bore pipes complete all as specified and directed.

Taking down old unsv DB and supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as directed by Engineer-in-Charge.

S&F of anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:-

Supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as directed by Engineer-in-Charge.

Supply and fix water heater storage type electric, capacity 25 litres BEE 5 star BEE rating AC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces and complete all as specified and as directed by Engr-in-Charge. Make : Usha Misty or euivalent

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 25 Sqmm 4 core laid in trenches, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge.

S&F of anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 16 Sqmm 2 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge.

S&F of roof trusses (framed),staging for water tanks, and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-410(Gde-E250) complete all as specified and directed by Engr-in-Charge.

RATE In Figures To be entered by the Bidder Rs.

M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for pipes galvanized, “Medium class”, supplied and laid complete including fittings 20 mm dia complete all as specified and directed.

Supply and fixing 25 mm bore steel water tubing, medium grade, galavanised with all fittings and laid in trenches complete all as specified and directed.

Supply and fixing gun metal globe or gate valve with iron wheel head, screwed both ends for 40 mm bore iron pipe and fixed in position complete all as specified and as directed.

Supply and fixing gun metal globe or gate valve with iron wheel head, screwed both ends for 25 mm bore iron pipe and fixed in position complete all as specified and as directed.

Supply and fixing gun metal globe or gate valve with iron wheel head, screwed both ends for 20 mm bore iron pipe and fixed in position complete all as specified and as directed.