SPECIAL REPAIR OF SARVA DHARMA STHAL OF BLDG NO T-464, ADDN/ ALTN FALSE CEILING OF TOP FLOOR BLDG NO O-18C AND RAILING AT HENDERSON HALL COMPLEX BLDG NO O-16 AT VIJAY DURG UNDER GE (FW) KOLKATA

Amount

Demolition of RCC of any description and in any position not otherwise specifically provided for .(upto 04 storey High of building)

M&L for RCC for Type B1 1:2:4 (20 mm graded aggregate) (Nominal mix) using 20 mm graded crushed stone aggregate as in chajjas, similar work all as specified and directed (upto 04 storey high building)

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

M&L for Mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for TMT bars complete all as specified and directed.

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.(upto 04 storey High of building)

M&L for Rendering 10 mm thick in CM (1:6) on fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building)

M&L for Rendering 15mm thick in CM (1:4) on fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building)

M&L for preparation of new plastered surfaces of wall and applying two coat of acrylic distemper over a coat of alkali resistant primer with 2mm thick wall care putty. complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building).

M/L complete removal of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping including old putty surface etc and applying two coat of oil emulsion distemper over a coat of alkali resistant primer and coat of wall / ceiling putty ( 2mm thick) to match with the new surface on wall and ceiling , complete all as specified and as directed by Engineer-in-charge.( incl necessary scaffolding ,upto 04 storey High of building).

M&L for complete removal and preparation of old wall surface and applying two coat of plastic emulsion paint over one coat primer and 2 mm thick wall care putty complete all as specified and directed.

M&L for complete removal and Preparation of old ceiling surface and applying two coat of plastic emulsion paint over one coat primer and 2 mm thick wall care putty complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc. and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exc. 25cm in soft loose soil complete all as specified and directed.

Removing excavated material exc.1.5 km but n.exc 5 km and depositing where directed.

M&L for hard core of gauge n exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 40mm graded aggregate finished complete all as specified and as directed.

Demolition of stone slabs and floor/ wall tiles of any description or thickness in floors, aprons all as specified and directed by Engr-in-Charge

M & L for colour Glazed ceramic tiles in vertical surface 600 X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm backing coat in CM 1:4 etc complete all as spd and as directed.

M&L for elevation surface exterior grade digital printed matt finish coloured Ceramic wall tiles (in matt finish natural stone shade/matt finish brick shade/matt finish vintage shade/3D tiles) of size 600 x 300 x 10-12 mm thick in vertical surfaces, set and jointed in polymer modified cementitious adhesive (Sikacream - 50 tilofix ) 15 mm thick as backing layer and pointed in white and black coloured cement for top surface grout to match the tiles shade complete all as specified and as directed.

S&F Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over screed bed 20mm thick CM 1:6 complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and like over and including 20mm thick cement mortar bedding (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. (upto 04 storey High of building)

M&L for 20mm thick machine cut kota stone slab flooring over 15 mm thick CM (1:4) screed bed laid and joined with grey cemet slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Supply and fixing Supply and fixing 8-10mm thick ENDURA tiles of size 300mmx300mm, as in flooring over 20mm thick backing layer of cement mortar (1:6) set and jointed in neat cement slurry and pointed in white cement mixed with admixture pigment to match the shade, as directed by Engineer-in-Charge.

Material and labour for grinding/polishing and cutting to existing stone floor of any description (such as kota stone, marble stone, terrazo, granite and similar surfaces etc) cleaning with water and applying zinc oxide powder complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed.

S & F solar control film 25 micron reflective type (garware sun control or equivalent ) complete all as specified and directed .

S&F powder coated anodised aluminium doors frame for doors, windows, ventilators and partition with one or more rebates including necessary jointing cleats, glazing clips rubber packing cleat for fixing etc complete all as specified.

Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F stainless steel wire cloth, 0.65mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed.

Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer- in-charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 45 x 85-90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section all as specified and as directed

S&F 125 mm long Aluminium handles, cast type, anodised complete all as specified and as directed by Engineer-in-charge.

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)

Demolition of brick work built in cement mortar including all quoins arches pillars etc but excluding ashlars facing, dressed stone work and precast concrete articles complete all as directed.

M&L brick work with Fly ash bricks, straight or curved on plan exc 6m radius buit in CM 1:6 complete all as specified and directed.

M&L brick work with Fly ash bricks, straight or curved on plan exc 6m radius in half bricks built in C:M 1:6 complete all as specified and directed.

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed. (upto 04 storey High of building)

M&L 25mm thick PCC 1:2:4 Type B-1 ( using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed by Engineer-in-charge.. (upto 04 storey High of building)

Dismantling cast iron or re-enforced concrete drain pipes of 100mm bore, jointed in cement mortar complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)

S&F sand cast pipes with out ears in any length fixed to wall with brackets of 100mm bore including bitummous paints both side complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)

S&F CI bend, diminishing piece with door of 100mm bore with duct, foot and heel rest complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)

S&F CI branch pieces single equal or unequal with door of 100mm bore complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)

S/F CI cowl of 100mm bore complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)

Taking down soil pipe/ rainwater pipes (any size or pattern ) including all fittings heads shoes bends swan -necks etc including cleaning or refixing or removal to store (measured over all fixed along the centre line over fitting and ( accessories)

S&F 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)

S&F 110mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material & Labour for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface surfaces of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for any height of the building complete all as specified and directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing Old Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

Dismantling AC/ galvalume corrugated roof sheets as in roof coverings including AC ridge complete all as specified and directed.

S&F pre - painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling Structural Steel Work including Doors, Gates, Framed Truss , railing etc. complete all as specified and as directed.

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.

S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed

S&F mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed

S&F mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm but n exc 15cm long complete all as specified and directed

Material and labour for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded aggregate as in surface channel and drain all as specified and directed.

Forming fair finished drain or channel any inner girth in cement concrete, using extra cement, including forms, mould, mitred/stopped ends etc complete all as specified and directed

Add or deduct for 25mm girth or part there of over or under 30cm girth in cement concrete, using extra cement, including forms, mould, mitred/stopped ends etc. complete all as specified and directed

M&L RCC 1:1½:3, type A1(NOMINAL MIX) (using 20mm grade stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid separately)

Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat all as specified and as directed by the Engineer-in-Charge.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 15mm. complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm. complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 25mm. complete all as specified and directed by Engineer-in-Charge.

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm, complete all as specified and directed by Engineer-in-Charge.

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20mm, complete all as specified and directed by Engineer-in-Charge.

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 25mm, complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC low level flushing cistern valve less, syphonic action type of 10 litres capacity white with inlet, ball valve, float and handle incl. cast iron brackets, PVC flush pipe 32mm dia ,PVC connection (15x 450 mm) long, fancy type chromium plated angle valve of 15mm bore dia complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous china EWC pedestal type incl seat cover with P or S trap white or coloured(excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs Vitreous china wash hand basin white ,flat back of size 550x400mm with pedestal including PVC connection (15x450)mm long with PTMT nuts and PVC washer and including cutting for pinning in ends, pair of cast iron brackets and provision of PVC waste pipe 32mm of adequate length , CP waste coupling 32 mm dia of half or full threaded, chromium plated fancy type angle valve 15 mm dia bore, and taking down unserviceable wash hand basin complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china urinals, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with grating and union for discharge pipe, including PVC waste pipe 32mm of suitable length, CP waste coupling 32mm dia suitable for urinals, PVC connection 15x 450mm long ,CP urinal spreader,15 mm Angle valve fancy type chromium plated complete all as specified and directed by Engr-in-charge.

S& F in repair 15mm Bib tap cast copper fancy type chromium plated alloy with capstan handle screwed down screwed for iron pipe or for brass ferrule and fixed in repairs. complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Pillar tap fancy type chromium plated with capstan head, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes 15 mm bore dia. Complete all as specified and directed by Engineer-in-Charge.

S&F in repair Stop valve cast copper alloy chromium plated 15mm dia, screwed down, high pressure with capstan handle, screwed both ends for iron pipes or for unions and fixed with long shank and cup (concealed type) complete all as specified and directed by Engineer-in-Charge.

S&F in repair Angle valve cast copper chromium plated alloy15mm dia, screwed down, high pressure capstan handle, screwed both ends for iron pipes or for unions and fixed with long shank and cup complete all as specified and directed by Engineer-in-Charge.

S & F in repair cast floor trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with run lead complete all as specified and directed

M & L Salt-gauged stoneware gully traps, square or round mouthed, type 'P', size 150x150 mm complete all as specified and directed

Excavating in post hole (or similar hole) each nexc0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 M and making good surface in soft and loose soil.

M&L PCC 1:3:6 type C2 (Using 40 mm graded aggregate) in Foundation, filling and mass concrete complete all as specified and directed

M&L 20 mm thick ( Z-black colour ) granite slab, machine cut as in steps riser of stair case ,jambs, pillars, window cills, cooking platforms and on floor over 20mm thick backing layer in cement mortar (1:6) , set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite tile including rubbing and polishing complete all as specified and as directed.

S&F for 12 mm thick toughned glass engraved with eastern command logo in it , size shall not be more than 450 x450 mm , at the centre of glass as in partitions, railing , automatic doors, sliding door or hinge door and similar work including cutting to shape, drilling holes required complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing, Grauting with cement mortar(1:3), and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts (covered with stainless steel cap) complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and 2 mm thick wall care putty over new plastered surfaces using airless spray technology capable of operating single spray gun with hose of adequate length for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.

M&L for applying one coat of oil emulsion distemper to old decorated surfaces of wall/ ceiling including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, efflorescent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Suspended metal grid Ceiling System with mineral fibre acoustic tiles incl taking down old false ceiling with snap grid as per following specifications:- a) Ceiling Tiles:- Mineral fibre acoustic tile of 16mm thickness having sand textured finish with acoustical punchers, bevelled regular edge and 8mm drop in module size of 600 x 600mm. Tiles shall have humidity resistance (RH) of 99%, NRC 0.50 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 33db as per ASTM E1414, Light Reflectance ≥85% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of class 0/1 as per BS 476 Part 6/7 and Class A as per ASTM E84. b) Metal Grid:- The grid system shall be 15 mm wide T - section flanges colour global white (matching to tile colour) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”.

(E/M PORTION) M&L for point wiring using approved colour coding as per IS (For phase and neural), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLSH , PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 1.5 Sqmm and connected to earth dolly including fixing of 1. 2 mm thick MS sunk terminal box 60 mm deep (minimum size 100 x 100 mm square) suitably flushed to wall with 3 mm thick plastic laminated/ebonite sheet cover fixed with brass screws and cup washers including making good the disturbed surfaces complete all as specified as following

One light point controlled by one switch/one fan point/one bell or buzzer controlled by one switch & fan regulator.

All as per item No 98,here-in-before but One socket outlet three pin, 5 Amps on the independent board.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Ceiling rose surface type 3 terminals 65x20mm complete all as specified

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F White cover plate with frame, 2 module complete all as specified and directed.

S&F White cover plate with frame, 3 module complete all as specified and directed.

S&F White cover plate with frame, 8 module complete all as specified and directed.

S&F Metal flush box 1/2 module complete all as specified and directed.

S&F Metal flush box 3 module complete all as specified and directed.

S&F metal flush box, 8 module complete all as specified and directed.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fix MCB SP 240V, 6-32 Amps capacity complete all as specified and directed.

Supply and fixing SPN 40 AMP rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S & F MCB DB, SPN 8 Ways Single Door IP-43 with rated bus bars earth bar, neutral links complete incl blanking plates as required & fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed.

S & F for GI tubing 25mm bore, light grade laid in trenches for cable protection, under the road/path/along the pole including taking down existing complete all as specified.

M & L for Earthing complete with and including galvanized steel plate electrode 600 mm x 600 mm x 6 mm, surrounded by mixture of charcoal and salt in alternate layers, buried directly in ground vertically in a pit of depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth of not less than 1.50 metre below ground level connected to galvanized iron or steel earth wire, 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 20 mm bore (Light grade) & connected to main switch or main control board all as shown in electrical plate No. 5 of SSR-1991 Part I & including necessary excavation & earth work. The rate also include charcoal & salt in alternate layers, 20 mm bore GI pipe (Light gde) for watering, protection pipe , funnel, PCC 1:2:4 type B-1 chamber in cement concrete, 50 mm thick precast RCC cover etc, and testing on completion etc, complete all as specified and directed by Engr-in-Charge.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core complete all as specified and directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

DEYS ENTERPRISE (BID ID -3431910)

M/S S. K. SARKAR (BID ID -3431736)

SHEIKH ENTERPRISE (BID ID -3431386)

JOY-EN-JOY (BID ID -3430406)

M A ENTERPRISES (BID ID -3428774)

MS HORIZEN (BID ID -3431674)

Somani Builders (BID ID -3431830)