Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.3 LAccepted-AOC 50 CHAURASIS KUNJ PURANA QUILA LUCKNOW 226001 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226001 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹8.2 L+₹72,884 (9.75%)Rejected-Finance 121 GURU GOVIND SINGH MARG LAL KUAN LUCKNOW UTTAR PRADESH 226001 | LUCKNOW | UTTAR PRADESH | 226001 | L2 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹9.8 L
EMD Value
₹19,600
Closing Date
15 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BKT
GE (AF) BKT, LUCKNOW
REPAIR/MAINT OF MISC WOODEN AND STEEL FURNITURE INCLUDING PAINTING AND POLISHING AT AF STN BKT
2022_MES_539083_1
8631/BKT/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BKT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE (AF) BKT
₹19,600
Yes
25 Oct 2022
18 Jul 2022
17 Aug 2022
18 Jul 2022
15 Aug 2022
1 Aug 2022
Amount
REPAIR TO CHAIR WRITING/CBA :- Dismantling/ Opening of joints of damaged/ broken member of chair writing/ CBA where required for replacement including removing of cane, and necessary polishing with French polish including cleaning and preparation of the surface to match with existing surface etc. all as directed of following (a) S&F front leg (left or right ) made out with Ist class HW seasoned Teak wood of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.
Ditto- all as per item No 1 above but rear leg (left or right)
Ditto- all as per item No 1 above but of front/ rear/side members of seat .
Ditto- all as per item 1 above but back Stiffener
Ditto-- all as per item 1 above but bottom stiffener
Ditto-- all as per item 1 above but Arms
Replacement of rubber shoes from chaires mentioned in item No 1 above with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.
Re-canning of chair writing/CBA with 2mm wide half round plastic cane except the border which shall be 3mm flat super quality cream/ white colour (Make - Shah/ Indian Plastic/MPT Premier) and weaving in accordance to Godrej Pattern as shown on drawing including taking down unserviceable plastic cane all as specified and directed by engr-in-charge.
REPAIR TO CHAIR DINING :- -Ditto- all as items No1 above but chair dinning for the following (a) S&F front leg (left or right ) made out with Ist class HW seasoned Teak wood of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.
Ditto- all as per item No 9 above but rear leg (left or right)
Ditto all as per item No 9 above but Front/Rear/Side members of seat.
Ditto-- all as per item 9 above but bottom stiffener
Replacement of rubber shoes from chairs mentioned in item No 9 above with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.
Re-canning of chair dining.with 2mm wide half round plastic cane except border which shall be 3mm flat super quality cream/ white colour (Make - Shah/ Indian Plastic/MPT Premier) and weaving in accordance to Godrej Pattern including taking down unserviceable plastic cane all as specified and directed by Engr-in-charge.
REPAIRING TO CHAIR EASY :- Ditto all as per items No 1 above but chair easy of the following (a) S&F front leg (left or right ) made out with Ist class HW seasoned Teak wood of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.
Ditto all as item No 15 above but Rear leg (left and right)
Replacement of rubber shoes from chair mentioned in item No 15 above with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.
Ditto- all as per item No 15 above but of front/ rear/side members of seat Frame .
Ditto- all as per item No 15 above but of top/ bottom/side members of Back Frame .
Ditto all as per item No 15 above but Bottom stiffner (front and Back below seat frame)
Re-canning of chair easy with 2mm wide half round plastic cane except border which shall be 3mm flat super quality cream/ white colour (Make - Shah/ Indian Plastic/MPT Premier) and weaving in accordance to Godrej Pattern including taking down unserviceable plastic cane all as specified and directed by engr-in-charge.
TABLE 900 X 600 X 760MM WITH/WITHOUT DRAWER :- Dismantling of unserviceable component of Table 900mm x 600mm x760mm with drawer and w/o drawer and providing new components all as specified & directed and shown in drg and polising with two coats of french polish to match the existing of the following (a) Table top of 18mm thick Pre-laminated particle board exterior grade with 4mm thick teak wood edging all around the top of table.
Ditto all as item No 22 above but Broken leg made out of Ist class hard wood (Teak wood).
Ditto all as item No 22 above but Bottom side broken long rail made out of Ist class hard wood (Teak wood).
Ditto all as item No 22 above but Bottom side broken short rail made out of Ist class hard wood (Teak wood).
Ditto all as item No 22 above but Broken middle stiffner made out made out of Ist class hard wood (Teak wood).
Ditto all as item No 22 above but Broken side stiffner made out of Ist class hard wood. (Teak wood).
Ditto all as item No 22 above but Drawers made out of Ist class hard wood/18mm thick prelaminated particle board and 6mm thick ply wood provide for bottom of drawer with aluminium anodised knob .
Replacement of rubber shoes from table mentioned in item No 22 above with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.
TABLE WRITING :- Dismantling unserviceable components of table writing and providing new components as specified, directed and shown in drg including two coats of polish with french polish to match the existing for the following (a) Top of 18mm thick exterior grade prelaminated particle board with one side melamine face and balancing white on other side ISI marked.with Ist class HW teak wood beading 4mm thick polishing with french polish (two or more coats) over a coat of wood filler etc.
Ditto all as item No 30 above but Drawer front side made of prelaminated particle board, 18mm thick, commercial including knob chromium plated 35mm size all as directed.
Ditto all as item No 30 above but Bottom of drawer made of 6mm thick, ply wood commercial fitted in drawer frame all as directed.
Ditto all as item No 30 above but Door shutter made of 18mm thick, prelaminated particle board, commercial with 4mm thick teak wood edging and piono hinges screwed and new knob chromium plated 35mm size all as directed.
Ditto all as item No 30 above but Back of table writing made of 6mm ply wood commercial BWR type all as directed.
Ditto all as item No 30 above but Side of table writing made of 18 mm thick prelaminated particle board all as directed.
Ditto all as item No 30 above but Removing old unserviceable legs of tables & S&F new legs made out with Ist class HW seasoned teak wood all as per Drg or of exsiting pattern polishing with french polish (two or more coats) over a coat of wood filler etc all as directed.
TEAPOY :- Dismantling of unserviceable components of Teapoy & providing new components all as specified and shown in drg including two coats of polish with french polish to match the existing of the following (a) Top of teapoy of 18mm thick Prelaminated particle board exterior grade with 4mm thick teak wood edging all around the top of table.
Ditto all as item No 37 above but Broken leg with new legs made of 1st class hard wood all as directed.
Ditto all as item No 37 above but All as per item No 37 above but broken short rails / side stiffener all as directed.
Ditto all as item No 37 above but All as per item No 37 here in before but broken long rails / middle Stiffener all as directed.
PEG TABLE :- Dismantling of unserviceable components of peg table and providing new components all as specified, directed and shown in drg including two coats of polish with french polish to match the existing of the following (a) Top of peg table with 18mm thick prelaminated particle board including 18 x 4mm thick teak wood edging.
Ditto all as item No 41 above but Leg of same size and shape, made out of Ist class hard wood teak.
Ditto all as item No 41 above but Top long rails made out of Ist class hard wood teak
Ditto all as item No 41 above but Top short/ bottam side stiffeners rails made out of Ist class HW teak
TABLE CENTRE :- Dismantling of unserviceable components of table center and replacing with new components all as specified and shown in drg including two coats of polish with french polish to match the existing of the following (a)Top of table with 18mm thick prelaminated particle board exterior grade including providing 4mm thick teak wood edging all around the top.
Ditto all as item No 45 above but Leg of same shapes and size made out of Ist class hard wood (teak).
Ditto all as item No 45 above but Top long rail made out of Ist class hard wood teak.
Ditto all as item No 45 above but Top short rail made out Ist class hard wood teak.
Ditto all as item No 45 above but Side stiffener made out of Ist class hard wood teak all as shown in drg.
Ditto all as item No 45 above but Middle stiffener made out Ist class hard wood of same size and shape as shown in drg.
REPAIR TO SOFA SET 4 SEATER/5 SEATER :-Dismantling of unserviceable component of sofa set 1/3/4/5 seater and replacing of following new component all as specified and shown in drg including two coats of polish with french polish to match the existing of the following (a) Arm of sofa set single or 3 seater made out of 1st class hard wood duly french polished of size and pattern all as shown on drg
Ditto all as item No 51 above but Leg of sofa set single or 3 seater made out of 1st class hard wood duly french polished of size and pattern all as shown on drg.
Supply new foam cushion Make-Sleepwell/Godrej 100 mm thick 32 density duly covered with superior quality tapestry cloth cover with good quality zip/chain (Not less than Rs120/Mtr) duly approved and as directed.
Removing Old unserviceable tapestry Cloth, hession Cloth, Old Spring, cushion/foam, doori & S&F new tapestry Cloth(not less than Rs 250/mtr), hession Cloth, Old Spring, cushion/foam, doori of Sofa 5(1+1+3) seater while as shown in drg or as per existing item shape/size all as required and approved and directed by engr-in-charge.
Repair to Table 900mm x 900mm x 760 mm:- Removing of old unserviceable table top and provision of new table top made of pre-laminated particle board 18/19mm thick BWR, interior grade Make; Novapan/Kitlam/Archid including 4 mm thick teak wood beading all round the table top as specified and shown on drawing and as directed by Engr-in-charge.
Ditto all as item No 55 above but Removing of old unserviceable leg and S&F new leg of existing shape and size Ist class hard wood (Teak wood) and fixing as shown in drawing,including polishing and as directed by Engr-in-charge.
Ditto all as item No 55 above but Removing of old unserviceable rail and S&F new rail of existing shape and size Ist class hard wood (Teak wood) and fixing as shown in drawing including polishing and as directed by Engr-in-charge.
Ditto all as item No 55 above but S & F Ist class hard wood (Shisham) bracket 75mm x 75mm x 25mm triangular fixed with suitable size with screws as directed by Engr-in-Charge.
TABLE DRESSING GENTS WITH MIRROR :- Dismantling of unserviceable component of table dressing gents and replacing of following new components all as specified, directed and shown on drg of the following (a) Back side of the box of table with 12mm thick teak wood planks in one piece.
Ditto all as item No 59 above but Top of the box of table with 12 mm thick prelaminated particle board with teak veneer face on top.
Ditto all as item No 59 above but Bottom of box with 12 mm thick prelaminated particle board with teak veneer face on both sides.
Ditto all as item No 59 above but Sides and partition with 12 mm thick prelaminated particle board teak veneer face.
Ditto all as item No 59 above but Drawers including Knob all as shown in drg
Ditto all as item No 59 above but Looking mirror with new mirror of 5.5 mm thick make - Swastika/Modiguard Atul free from destruction and other defects with complete teak wood frame enclosed with 6 mm thick plywood BWR type.
TABLE DRESSING LADIES WITH MIRROR:- Dismantling of unserviceable component of table dressing ladies and replaced to following new component all as specified,directed & shown in drg. (a) Top of the table dressing ladies with 18mm thick prelaminated particle board teak veneered face on top and other side commercial.
Ditto all as item No 65 above but Back of table with 12mm thick ply wood commercial type BWR
Ditto all as item No 65 above but Side and partition with 12mm thick prelaminated particle board teak veneered face on both side
Ditto all as item No 65 above but Bottom 12mm thick commercial ply all as specified and as directed
Ditto all as item No 65 above but Bottom side ply wood of drawers replaced with 6mm thick ply wood
Ditto all as item No 65 above but Replace to unserviceable looking mirror with new mirror of 5.5mm thick Make - Atul, Modiguard or Golden fish free from all defects with complete teak wood frame enclosed with 6mm thick ply wood BWR type
Ditto all as item No 65 above but Aluminum channel with standard aluminum channel having two 'U' shaped channels for sliding of plain glass of 5mm thick
Ditto all as item No 65 above but Plain sliding glass 5mm thick with new sliding glass all as shown in drg.
TABLE BED SIDE :-Dismantling of unserviceable components of Table bed side and providing new component as shown in drg for following (a) Ply wood of back side of Table bed side with 6mm thick plywood BWR type.
Ditto all as item No 73 above but Legs with 1st class hard wood
Ditto all as item No 73 above but Top of table bed side with prelaminated particle board of existing size.
Ditto all as item No 73 above but Shelf of table bed side with prelaminated particle board of existing size.
Ditto all as item No 73 above but Side of table bed side with prelaminated particle board of existing size.
REPAIR TO BOOK CASE SMALL WOODEN : Taking down old U/S top of book case small and S&F new top of book case 19 mm thick pre-laminated particle board exterior grade as per existing shape and size all as specified and shown on drawing and directed by Engr-in-Charge.
Ditto all as per items No 78 above but replacement of shelf of book shelf small open with S&F new shelf all as specified and shown on drawing and as directed by Engr-in-Charge.
Ditto description all as per items No 78 above but replacement of old U/S back of book case small and S&F new back of 6mm thick ply wood commercial BWR with required size of screw all as specified and as directed by Engr-in-Charge.
Bed ply wood top:- Removing of old unserviceable back rest of bed ply and S&F new back rest as per existing size and shape of Ist class HW seasoned teak wood incl polishing (two or more coats) over a coat of wood filler after preparation of surface complete all as directed.
Removing of old unserviceable foot rest of bed & S&F of foot rest made as per existing size and shape or as per Drg Ist class HW seasoned (teak wood ) incl polishing two or more coats of over a coat of wood filler after preparation of surface.
Removing of old ply top of bed ply and S&F new ply top of 12mm thick BWR type ISI marked all as shown in Drg. Make- : century/Kitply/Archid/National
Removal of old wooden stiffeners of bed ply and S&F Ist class Hard wood stiffeners of size 900 x 50 x 60mm suitable for bed ply all as shown in Drg incl polishing two or more coats of wood filler after preparation of surface etc. complete all as directed.
Taking out old unsv long rail of bed plywood and providing of new long rail of Ist class HW (Teak ) of existing shape and size all as specified and Drg incl polishing two or more coats over a coat of wood filler after preparation of surface etc.
TABLE DINING 6/8 PERSONS :- Dismantling of unserviceable component of table dining 6/8 persons and providing new components all as specified & directed shown in drg including polishing to match the existing of the following (a) Top of table made of 18mm thick exterior grade prelaminated particle board with 4mm thick teak wood edging all around the top of table dining for 6 persons
Ditto all as per item No 86 above but for 8 persons of size 1800mm x 900mm.
Ditto all as item No 86 above but Long rail made out of Ist class hard wood for table dining 6 persons.
Ditto all as per item No 87 above but for 8 persons.
Ditto all as item No 86 above but Short rail made out of Ist class wood for table 6/8 pers .
Ditto all as item No 86 above but Leg made out of Ist class hard wood as specified and shown in drg.
TABLE BED SIDE (MAP):-Dismantling of the unserviceable component of Table bed side and providing new component all as directed of the following (a) Ply wood of back side of Table bed side with 6mm thick plywood BWR type Inclding hard wood stopper .
Ditto all as item No 92 above but Gas welding to broken joints of Table Bed side Steel Frame of 18mm square pipe.
Ditto all as item No 92 above but Top of table bed side with prelaminated particle board of existing size with PVC edging all around .
Ditto all as item No 92 above but Removal of old unserviceable telescopic channel MS/SS of drawer and S& F new telescopic channel SS of existing size and best quality.
Ditto all as item No 92 above but Side of table bed side with prelaminated particle board of existing size.
Replacement of rubber shoes of table Bed side (MAP) with S & F new rubber shoe of superior quality of suitable size complete all as directed by Engr-in-Charge.
REPAIR TO CHAIR DINING (OFFICERS) :- Opening of joints of damaged/ broken member of chair dining officers where required for replacement including removing seat fabric on 12 mm plywood if necessary, polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc. all as directed by Engr-in-charge of the following (a) S&F front leg (left or right ) made out with Ist class HW seasoned Teak wood of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.
Ditto- all as per item No 98 above but rear leg (left or right)
Ditto all as per item No 98 above but Front/Rear/Side members of seat.
Replacement of rubber shoes of chair dinning (Officer) with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.
Removing of existing U/S cushion from bottom seat of chair dining officers and S&F new foam cushion Make-sleepwell/Godrej, 75 mm thick 40 density duly covered with superior quality tapestry cloth (Not less than Rs 250/Mtr) with fabric on seat of 12mm thick ply and as directed by Engr-in-Charge.
M&L for preparation of old wooden surfaces and applying one or more coat of French polish of required shade complete all as directed for the following :- (a) Bed with ply wood top
Ditto all as item No 103 above but Chair writing/CBA
Ditto all as item No 103 above but Chair Easy
Ditto all as item No 103 above but Chair dining
Ditto all as item No 103 above but Table 3'x2' with & without drawer
Ditto all as item No 103 above but Table writing/med
Ditto all as item No 103 above but Table dressing ladies with mirror
Ditto all as item No 103 above but Table centre with sunmica top
Ditto all as item No 103 above but Table bed side
Ditto all as item No 103 above but Table 3'X3'
Ditto all as item No 103 above but Teapoy/Teapoy FD
Ditto all as item No 103 above but Table Peg
Ditto all as item No 103 above but Book case small
Ditto all as item No 103 above but Table dining 6 Pers
Ditto all as item No 103 above but Tabel dining 8 Pers
Ditto all as item No 103 above but Chair dining officers MAP
REPAIRS TO CHAIR TUBULAR STEEL WITH OR WITHOUT ARMS- M&L for Gas welding to broken members of chair tubular steel with & without arms as directed .
Ditto all as item No 119 above but Painting of MS members of chair tubular steel with and without arms with one coat of olive green/ smoke gray synthetic enamel paint all as specified and directed .
Taking out unserviceable seats from steel chair with & w/o Arms and S&F Ist class HW seasoned sheesham wood seat of existing size & shape and fixed with suitable bolts, nuts and washer including polishing and recanning with polythene white cane half round as per IS-5378 -1968 2mm wide and .3mm thick for seats & 4mm wide & 0..4mm thick border including supply of cane complete all as directed by EIC.
Ditto all as item No 121 above but steel chair back -do-
Taking out US arms rest from steel chair with arms and supply and fixing chair arms rest with suitable bolts, nuts and washer all as directed
S&F in repair hard rubber shoe black 20mm dia suitable for bottom of steel chair with suitable size of steel screw all as directed.
S&F in repair hard rubber cap black suitable for 20mm dia at top of steel chair complete all as directed.
Repair to Chair Verandah :- Repairs to broken mild steel components of chair verandah with gas welding, including replacing broken/ worn out legs with new 20mm dia MS pipe 1.6mm thick 75mm to100mm long .
Ditto all as item No 126 above but Removing of all u/s canes of chair veranda and supply & recanning with plastic cane of size 4mm / 6mm half round best quality as per IS-5378-1968 including one coat of Synthetic enamel paint White to complete frame of chair all as specified & directed after preparation of steel surfaces complete all as directed.
S & F PVC rubber Shoe/Toe of best quality after removing the old un- serviceable shoes all as specified and directed.
Removing and replacing unserviceable seat back & seat bottom PVC moulded by fitting with new PVC moulded seat back & seat bottom of chair verandah (MAP chair varandah) including one coat of Synthetic enamel paint White to complete frame of chair all as specified and shown on Drg. after preparation of steel surfaces. Make of the PVC Seat & Back - AMKO, Classic. ( Note :- Both Seat back & Seat bottam of the chair verandah shall be replaced to form 1 unit for the purpose of payment to the contractor.)
TABLE 900MM X 600MM X 760MM WITH DRAWER /WITHOUT DRAWER STEEL:- Dismantling of unserviceable component of Table 900mm x 600mm x760mm with drawer and w/o drawer steel and providing new component all as specified & directed for the following (a) Dismantling of unserviceable table top and providing new top of 18 mm thick prelaminated particle board ISI marked exterior grade with melamine face on one side and balancing white on other side, and fixing 4 mm thick teak wood edging all around of the top as specified and shown on Drg and as directed by Engr-in-Charge Make-Novapan/Kitlam/Archid
M&L for Gas welding to broken joints of table of size 900mm x600mm x760mm with drawer/ without drawer Steel
Repairs to the drawer of table steel as mentioned in item No 130 above making good dents, proper alignment for smooth function of drawer including removing of unserviceable lock & PVC handle of drawer and supply & fixing new lock with key in duplicate & handle as spececified in drg.
Scraping of all existing paints by any means in table mentioned in item No 130 above inside and out side of drawer and legs & applying one coat of olive green paints one inside surfaces and out side surfaces by spraying.
S &F in repair /replacement of rubber shoe of superior quality in table mentioned in item No 130 above with suitable size complete all as directed and specified in drg.
REPAIR TO TABLE STEEL 900 X 900 X 760 MM :- (a) Removing of U/S top and S & F new top 18/ 19mm thick pre-laminated particle board exterior grade teak finish on one side and other side balancing white with 4 mm thick teakwood beading all-round the top of table steel 900x900x760mm as shown on drg and specified Make-Novapan/Kitlam/archid
Gas welding to broken joints of table Steel 900mm x900mm x760mm including Cutting of worn out/broken legs of table steel and replace with new square MS pipe 1.6mm thick 75mm to 100m long and fixing with gas welding complite
S &F of rubber shoe for table steel mentioned in item No 136 above with new rubber shoe of superior quality with suitable size complete all as directed by Engr-in-Charge.
Scraping of all existing paints by any means inside and out side of drawer and legs of table steel 06 size mentioned in item No 136 above & applying one coat of olive green paints one inside surfaces and out side surfaces by spraying.
CONVERSION OF GI CHARPOY NYLON NEWAR INTO CHARPOY GI PIPE PLY WOOD TOP (a) Removing of unserviceable nylon newar and supply and fixing 12mm thick ply wood commercial BWR plywood kit ply/century/Archid ply and fixing same with two nos of flat iron strip of size 900x32x5mm, bolts nuts and washers bolts of size 5x65mm 12 nos round head bolts after dirlling the three holes of each long rail and drilling two hole on each short rail and two hole in flat iron complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing complete all as per specified and as direction by Engr-in-charge.
Removing of unserviceable elbow of charpoy GI pipe and S & F three way GI elbow 32mm medium grade ISI marked complete all as specified and directed by Engr-in-charge.
Removing of unserviceable check nut of GI Charpoy and S&F new check nut 32mm bore 10mm thick suitable for charpoi GI pipe 32mm bore complete all as specified & directed.
M&L for removing the threadless/broken long rails from charpoy GI pipe 32mm and S & F new long rail of 32mm dia GI pipe medium grade 1.88 mm long threaded at both ends and fixed to existing three way elbow 32mm dia and all shown on drawing (GI pipe make : TATA /Jindal).
Taking out existing old broken short rail from charpoy GI 32 mm dia and providing in position 1 nos short rails made out of broken long rail obtained from taking down above item No 27(d) including threading on both ends complete fixing all as specified and shown on drg (Note : U/S check nuts to be replaced in above item and measured and paid as supply only under relevant items.
Taking out existing old broken legs from charpoy GI 32mm dia and providing 01 Nos new legs in position made out of old broken long rail/ short rail obtained from taking down above item No 27 (d) & 27(e) and S & F 3mm thick and 40 mm dia MS plate welded at bottom of leg and two Nos MS clamp made out of 25x3mm size FI welded legs including threading on top and painting of clamp with two coat of synthetic enamel paint over a coat of oxide primer and complete all as specified and directed by engineer-in-Charge.
M&L for opening of joints of GI charpoy of 32 mm dia pipe where repaired and reassembleing incl provision at bottom of legs shall be plugged with 3mm thick mild steel sheet welded to bottom of legs and hard wood plugs all as directed
Supply and welding 02 Nos flat iron 25mmx3mm mild steel clamp made shall be welded to all galvanised iron legs. Bottom of lower clamp shall be 275mm from top of Horizontal rails. Bottom of lower clamp shall be plugged with 2mm thick mild steel sheet all as directed.
Removing of unserviceable Plywood from GI charpoy and supply and fixing 12mm thick ply wood commercial BWR plywood make kit ply/century/Archid ply and fixing with bolts nuts and washers, bolts of size 5x65mm 12 nos round head bolts complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing complete all as per specified and as direction by Engr-in-charge.
ALMIRAH STEEL LARGE/MED WITH SHELVES Repairs to almirah steel large/medium with shelves as appended below complete all as specified and directed including supply of materials and labours as required for the following (a) Removing of unserviceable locks and providing new locks of size 50 mm, SS Lever 6 levers ISI marked with stainless steel keys in duplicate for Almirah large/ med/ Small steel with shelves and fixing them with existing 3 way locking system for almirah large steel. For almirah large steel.
Ditto all as item No 148 but almirah med steel.
Removing of unserviceable legs and providing new legs made out of 1mm thick MS black sheet & welding properly to almirah large steel with shelves as directed as per drg duly painted with two coats of synthetic enamel paint Olive green colour, over a coat of red oxide primer by means of spray painting complete all as directed.
Ditto all as item No 150 but almirah med steel.
Reparing of shelves by providing new clamps to adjusting/fixing the shelves for almirah large/med steel.
Removing of unserviceable broken handles & providing new handle steel chromium plated to almirah large/med steel with shelves & fix suitably as directed.
Removing of unserviceable locking device with rods & clamps for top and bottom locking of doors for almirah large large steel and providing new new locking device with rod of 10mm dia MS bar made to existing shape including cover for lock and clamping complete all as specified and directed.
Ditto all as item No 154 above but almirah med steel.
M&L spray painting to both external & internal surfaces of almirah large steel with shelves with one coat of synthetic enamel paint in olive green colour including scraping wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed
Ditto all as item No 156 but almirah med steel
Book case large steel:- (a) Taking out unserviceable handle and S&F of new chromium plated casted handle of same size as directed.
Taking out unserviceable locks for book case large steel and S&F new SS/brass lever lock of approved quality as per Godrej pattern as directed.
Opening of shelves and cleats and denting of de-shaped portion of book case large steel as required and refixing in same position as directed by EIC
Removing of unserviceable/broken glass of book case large steel and S&F new glass 3 mm thick of existing shape and as shown on drawing and directed by Engr-in-Charge. Make; Modiguard/Atul/Swastik.
REPAIR TO TABLE OFFICE (OFFICER/CLERK) STEEL:- Repair to table office (officer/clerk) steel as appended below complete all as specified and shown in drawing including supply of meterial and labour as required for following (a) Dismantling of unserviceable table top and providing new top of 18mm thick prelaminated particle board with melamine face one side & other side balancing white with 4mm thick teak wood edging all around for table office officer steel (1800 mm x 1200 mm) all as specified and directed.
Ditto all as item No 162 above but for table office officers (1680mm x 870mm)
Ditto all as item No 162 above but for table office clerk steel (1200mmx900mm)
M&L for Gas welding to broken joints of table office officer/clerk complete all as directed.
Repairing to the drawers of table office officers /clerk steel, making good dents, proper alignment for smooth function of drawers including removing of unserviceable locks of drawer and supply & fixing new locks with key in duplicate as specified in drg
Scraping of all existing paints by any means inside & outside of drawer & legs of table office officer steel and applying one coat of olive green paint (glossy finish) on surfaces by spray painting all as directed.
Ditto all as item No167 above but For table office clerk steel
TEAPOY VERANDAH:- M&L welding of broken joints of MS member of teapoy verandah all as specified and directed .
M&L painting to complete frame of teapoy verandah with one coat of paint white synthetic enamel complete all as directed.
Dismantling of unserviceable top of teapoy verandah and providing new top of 18mm thick melamine faced prelaminated particle board and other side balancing white of size 900mm x 450mm all as directed and shown in drg,including 3mm thick teak wood edging around the top all as directed.
REPAIR TO CHAIR REVOLVING/ COMPUTER/EXECUTIVE GODREJ PATTERN : Dismantling and replacement with new hydraulic system set of the unserviceable of chair revolving steel all as specified and directed
Ditto all as item No 172 above but chair leg wheel
Ditto all as item No 172 above but Side handle
Removal of U/S Foam seat bottom & back complete and S&F new Foam make Sleepwell as approved by Engr-in-charge with superior grade of tapestry cloth cover including ply wood and PVC edging all around as per existing size complete all as directed.
Ditto all as item No 172 above but Removal of U/S Cushion Cover and supply & ffixing of superior tapestry cloth for Seat back & bottom both (rate not less than Rs 250/Mtr) as approved by engr-in-charge & all as per directed.
Ditto all as item No 172 above but PVC Base with complete set
Ditto all as item No 172 above but Iron Base plate with complete set
CHARPOY MS BOX SECTION WITH PLY WOOD TOP :- Removing of unserviceable plywood k and supply and fixing 12mm thick ply wood commercial BWR plywood Make kit ply/century/Archid ply complete all as per specified and as direction by Engr-in-charge.
M&L for scrubbing, derusting and applying two coat of synthetic enamel paint (spray painting) incl preparation of surface all as directed by Engr - In - charge for Charpoy MS Box section with plywood top all as directed.
S&F in repair rubber shoe black for 32mm Square pipe suitable for legs of Charpoy MS Box section with plywood top complete all as directed.
Chair Non revolving steel cushion/ Chair writing (MAP)/ Chair visitor:- Removal of U/S Foam seat bottom & back complete and S&F new Foam make Sleepwell as approved by Engr-in-charge with superior grade of tapestry cloth cover including ply wood and PVC edging all around as per existing size when required.
Ditto all as item No 182 above but Removal of U/S Cushion Cover and supply & fixing of superior tapestry cloth for Seat back & bottom both (rate not less than Rs 250/Mtr) as approved by engr-in-charge as per existing size.
M&L for scrubbing and derusting, denting of de-shaped portion and applying two coat of primer and over it two coat of synthetic enamel paint (spray painting) incl preparation of surface for Rack side 3/4 space steel with tray all as directed by EIC for the following :-
Ditto all as item No 184 above but Steel rack 6 tier
Ditto all as item No 184 above but Rack steel 900X450X2400mm
Ditto all as item No 184 above but Chair steel cushion non revolving
Ditto all as item No 184 above but Stool 2' height
Ditto all as item No 184 above but Stool bar steel
Ditto all as item No 184 above but Book case large steel
Ditto all as item No 184 above but Steel mesh seat with back for visitor 3 seater
Ditto all as item No 184 above but Locker bed side steel
Bed Hard steel:- Removing of unserviceable plywood 12 mm thick and supply and fixing 12mm thick ply wood commercial BWR plywood Make kit ply/century/Archid ply complete all as per specified and as direction by Engr-in-charge.
Ditto all as item No 193 above but M&L for scrubbing, derusting and applying two coat of synthetic enamel paint (spray painting) incl preparation of surface all as directed by Engr - In - charge
Ditto all as item No 193 above but Removing of unserviceable prelaminated particle board 18 mm thick of head board of bed hard steel and supply and fixing 18mm thick prelaminated particle board interior grade Make:- Novapan/Kitlam/Archid all as per specified and as direction by Engr-in-charge.
Ditto all as item No 193 above but Removing of unserviceable prelaminated particle board 18 mm thick of foot board of bed hard steel and supply and fixing 18mm thick prelaminated particle board interior grade Make:- Novapan/Kitlam/Archid ISI Marked all as per specified and as direction by Engr-in-charge.
Ditto all as item No 193 above but S&F in repair rubber shoe black for 38mm Square pipe suitable for legs of Bed hard Steel.
JAISWAL ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .