PROVN OF TOILET BLOCK FOR STUDENT OFFICERS IN TECH AREA AND REPLACEMENT OF BER CEILING FANS EXHAUST FANS GEYSERS AND ENERGY METERS AT MILIT GIRINAGAR PUNE 411025

Amount

PROVN OF TOILET BLOCK FOR STUDENT OFFICERS IN TECH AREA AT MILIT GIRINAGAR PUNE (B&R PORTION) Surface excavation n.exc 30cm deep and average 15cm and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.50mtr wide and not exc 1.50mtr in depth for foundation etc and getting out in soft / loose soil complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) exc. 10 cm in width and setting in CM 1:6, complete all as specified and directed.

Returning filling in, well watering ramming in layers not exceeding 15cm thick complete all as specified and directed.

Removing of excavated soil to a distance not exc 50mtrs and depositing where directed at a level not exc 1.50 mtrs above the starting point complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in two layers, 5mm thick using WPC @3% by weight of cement over 10mm thick on cement concrete block masonry/concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement, complete all as specified & directed.

M&L for rendering 15 mm thick on brick surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Supply only WPC of approved make complete all as specified and directed.

M&L for preparation of surfaces and applying 2mm thick wall care putty in two layers on walls/concrete over new plaster surfaces internally complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on New surfaces of wall complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10Sqm over Old/New surfaces of wall including necessary scaffolding required for painting work, safety measures etc.complete all as specified and directed.

M&L for RCC Nominal Mix type B1 1:2:4 (using 20mm graded stone aggregate) as in Roof beams, lintels, cantilevers, etc complete all as specified and as directed.

M&L for RCC Nominal Mix type B1 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, chajja, Roof beam, roofs , canopies, shelves & the like complete all as specified and directed.

M&L formwork to soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, overhangs etc also splays between floors and beams etc. complete all as specified and directed.

M&L formwork to soffits of suspended slab such as roof slabs , chajja, floor slabs, shelve, landings and similar works n.exc 200 mm thick (horizontal or sloping). complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incfluding cranking, bendidng etc and binding with and includidng mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars 5 to 10mm dia as in sturrips cut to length bent to shape required including cranking, bending etc and bindidng and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

Spreading,levelling,watering and well ramming the earth filling under floor not exc. 25cm thick in layers complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type B1 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick complete all as specified and directed.

M&L for full body colour Marble tiles glossy finish 9-10 mm thick (square/regtangular) polished, stain proof and durable and abrasion resistant with high flexural strength area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match with over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for full body colour Marble tiles glossy finish 9-10 mm thick (square/regtangular) polished , stain proof and durable and abrasion resistant with high flexural strength area of each tiles ( 600 mm X 1200 mm) or not exc 1.28 sqm in skirting/vertical surfaces etc. as per manufactureres specification confirm to IS 13630 and ISO 10545 and joineted neat in cement slurry and pointed in white or colour cement to match with over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 12mm thick mineral fibre board false ceiling on and including GI powder coated grid work of size 600mm x 600mm with using 32.5mm x 23.5mm x 1.5mm thick main tee, 25mm x 23.5mm x 1.28mm cross tee and 25mm x 23.5mm 1.2mm angle fixed to wall for false ceiling including necessary supporting hangar with 4.00mm dia GI wire nad 'J' hook bolts washer nuts for securing frame work to ceiling, suspended @ 120cm C/C both ways, size of grid shall be 605mm x 605mm complete all as specified and directed. MAKE : Armstrong or Saint Gobain as approved.

S&F for solid PVC coloured door frame of size 50 x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening complete all as specified and directed.

S&F for factory made solid PVC moulded door shutter 28 to 30mm thick (sysles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on front face and 2mm plain colour PVC sheet on back face with particle board core complete all as specified and directed.

S&F 100mm butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 200mm long Aluminium anodised barrel tower bolts complete all as specified and directed.

S&F 150 mm size aluminium anodised door handles complete all as specified and directed.

S&F anodised aluminum frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S&F anodised aluminum door shutters, aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.

M&L for 12mm thick frosted toughened glass fixed to door and window and partition as directed by Engr-in-Charge including necessary wooden beadings, steel clamps, hinges nails, screw, complete all as specified and directed.

S & F for door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of weight between 61 to 80 Kg complete all as specified and directed.

S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S& F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply and fix for vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. Make :- Hindware, catalogue No. 20028/ 20024 Constellation, 21038 cistern, pastel (complete set) or equivalent in Cera/Parryware as approved. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.

S&F Vitreous china Urinal, full stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including CP Urinal spreader for fixing with 15 mm dia pipe complete all as specified.

S&F Counter top Wash hand basin, vitrous china, coloured flat back of size 540X360X150 mm including brass waste coupling, CP bottle trap 32mm size with 250mm & 190mm long wall connection pipe & wall flange, 15mm dia fancy type single lever tall boy swan neck pillar tap chromium plated with 150mm extention body fixed spout without popup waster system with 600mm long braided hoses complete all as specified and directed.

S&F Chromium Plated Push type, auto closing concealed Urinal Flush valve with wall flange complete all as specified and as directed.

S&F Bib taps fancy type chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S&F fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed.

S&F stainless steel grating doom 125mm dia complete all as specified and directed.

S&F Chromium Plated Toilet Paper Holder complete all as specified and directed.

S&F soap dish any type fixed type fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and as directed.

S&F 15mm dia bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for UPVC/iron Pipe complete as specified and as directed.

S&F brass chromium plated tubular towel rail 20mm dia excluding brackets both side complete all as specified and directed.

S&F brass chromium plated bracket for towel rail complete all as specified and directed.

M&L for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F Gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified and directed.

S&F for steel water tubes, 20mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and directed.

All as per item No. 52.00 here in befor but 15mm bore complete all as specified and directed.

M&L for cutting chases, pinning in brick, stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making good complete all as directed by Engr-in-Charge.

M&L for PVC (SWR) waste and vent pipe 100mm bore in any length with rubber ring joint laid in floor or wall complete all all as specified.

M&L for PVC (SWR) waste and vent pipe 75mm bore in any length with rubber ring joint laid in floor or wall complete all as specified and directed.

S&F for Stack clamps for bore (any dia) of pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,100mm including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F PVC (SWR) bends of any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends of any radius 75mm bore complete all as specified and directed.

S&F 110mm dia PVC (SWR) vent cowl complete complete all as specified and directed.

S&F 75 mm dia PVC (SWR) vent cowl complete complete all as specified and directed.

S&F PVC (SWR) junction double ( single T) of size 110mm bore jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) reducer 110mm to 75mm bore jointing with solvent cement complete all as specified and directed.

S&F 1000 ltrs capacilty, Rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and in position including ball brass valve 20 mm high pressure with polythene float and fly nut complete all as specified and directed.

S&F anodised powder coated (thickness of powder coating not less than 50micron) aluminim window and ventilator shutters, fixed type without sash bar, aluminium section weight not less than 0.55kg/mtr including necessary joining cleats, glazing clips, rubber packing, screws etc.complete all as specified and directed.

M&L for 4mm thick figured glass, pin head type and glazing with not exc 0.5 Sqm in each pane to aluminium frame work for ventilators complete all as specified and directed.

M & L for granite 18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.50 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in hard/dense soil.complete all as specified and directed.

M&L cement concrete in foundation type C 2, 1:3:6 (using 40 mm graded stone aggregate) as in filling and mass concrete. complete all as specified and directed.

S&F rolled mild steel work in roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy duty brackets framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L for mild steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc, sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

M& L for mild steel black sheet in door 1.60 mm thick in steel gate and in similar work cut to size, holes punched ,including round heraded screws ,cut nails or revets, and fixed to wood or steel framing with plain 40 mm lap joints with reveted or welded sams including or turning up,mitred complete all as specified and directed.

M&L for 2 coats of synthetic enamel paint over a coat of red oxied primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified and as directed.

S&F Pre-painted coloured galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/Chajja/cladding to wall, height upto 10mtr from floor level fixed with self tapping screws/'J' hook complete all as specified and as directed by Engr-in-Charge. Note : Colour of sheet shall be got approvd from EIC.

S&F Pre-painted coloured galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/Chajja/cladding to wall, height upto 10mtr from floor level fixed with self tapping screws/'J' hook complte all as specified and as directed by Engr-in-Charge. Note : Colour of sheet shall be got approval of EIC.

M&L for Hard core of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection complete all as specified and directed.

(E&M PORTION) M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked including PVC conduit drawn through PVC concealed conduit fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, including cutting & chasing, modular cover plates and modular flush boxes, Plate for mounting for housing the switches, socket outlets, fan regulators etc, all as specified and as directed. Note : Cost of cutting chases & making good the disturbed surface to match with existing finishes shall deemed to be included in quoted rate. (a) One light point controlled by one way switch.

(b) One fan/exhaust fan point controlled by one switch and one regulator.

(c) One 3 pin switch socket outlet point 5 Amps on independent board.

S & Fix modular switch 1 way 6A, 1 module complete all as specified and directed.

S & Fix modular socket out let 6A 2/3 on combined 2 module complete all as specified and directed.

S & Fix Ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.

S & Fix of recess mounted 2' x 2' square LED panel 36 watts, Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling complete all as specified and directed.

S & Fix LED batten 10 Watts, 2 Feet, with electronic driver including necessary electric connections 3 core 1 sqmm insulated copper wire from ceiling rose to tube light fitting complete all as specifed and directed by Engineer-in-charge.

S&F exhaust fan, AC, single phase, 240 V, 250 mm sweep, PVC body louvers, including connected with 3 core 1.5 sq mm copper conductor cable from ceiling rose to exhaust fan all as specified and as directed

S&F exhaust fan, AC, single phase, 240 V, 225 mm sweep, Metal body with metal blades metal louvers, including connected with 3 core 1.5 sq mm copper conductor cable from ceiling rose to exhaust fan all as specified and as directed.

S & Fix double door sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete all as specified and directed.

S & Fix of MCB single pole and neutral, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix of MCB single pole, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix sheet metal enclosure distribution board SPN DB's 2 way with MCB complete all as specified and directed.

S & Fix 30 Watts LED new generation energy saving and environmental friendly long life LED building light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 complete all as specified and directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC conduit with its accessories all as specified and directed by Engr-in -charge for the following :- (a) 2x1.5 sq mm and 1x1.5 sq mm as earth wire complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in Soft / loose soil including forming bottom surface etc. complete all as specified and directed.

Returning, filling in including spreading, levelling ,watering and well ramming in layers not exceeding 25 cm thick complete in soil complete all as specified and directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 50 mtr above the starting point complete all as specified and directed.

Supply & Laying 50 mm outside dia double wall corrugated pipe (DWC) of HDPE ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement complete all as specified and directed.

M &L for GI pipe of 50mm dia 'light grade' for road crossing / on wall / on pole for cable protection complete all as specified and directed.

M & L Earthing complete with galvanised steel earth plate electrode 60x60cmx06mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. Note : Cost of earth lead & protection pipe upto 7.5m shall deemed to be included in quoted rate.

REPLACEMENT OF BER CEILING FANS, EXHAUST FANS, GEYSERS & ENERGY METERS AT MILIT GIRINAGAR PUNE (E/M PORTION) Supply and fixing ceiling fans complete with blades, down rods (1'/1.5'/2') as per site requirement and all accessories, 230 V, 1200mm sweep five star rated with brushless direct current motor (BLDC) regulator type and including removing old rusted ceiling fan and handed over to MES office all as complete all as specified and directed.

Supply, installation,connecting and testing of storage type water heater, 25 litres capacity 5 star rated, with temperature adjustable knob and temperature analogue display, 02 Nos 2 feet steel hot and cold water connections including necessary all fixing arrangments like bolts, drilling works and etc suitable for working on AC single phase, 230 V, 50HZ including removing old geyser and handed over to MES office all as specified and directed.

Supply and fix metal exhaust fan 230 mm sweep with internal and external louvers/flaps 4 blades type 230 volt connection up including provision of 3 core cable from ceiling rose/connector to fan with all necessary fixing arrangments including removing old unsv exhaust fan and handedover to MES office all as specified and directed. Note : Existing exhaust fan hole in wall should be properly plastered and sized as to match with the new exhaust fan all as directed

Supply and fix single phase electronic meters temper proof LCD display with polycabronate cover 230 V, 10-60Amp, accuracy class-I 50HZ, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH including removing old unsv energe meter and handed over to MES office all as specified and directed.

Supply and fix three phase 4 wire electronic meters temper proof LCD display with polycabonate cover 415 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH including removing old unsv energy meter and handed over to MES office all as specified and directed.

M/S ANJANI ASSOCIATES