WARD NO. 08 MOH. HANUMANAPURI ME GLOBAL SCHOOL SE SHIV MANDIR TAK HOTAMIX SADAK KA NIRMAN KARY.

Dismantling of flexible pavement and disposal of dismantled material upto lead of 100m stacking servicable and un servisable material seperately

Providing laying, spreading and compaction stone aggregates of 22.4-53 mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling wih smooth wheel roller 80-100 kn

Providing and applying tackcoat with VG-10 bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg. per sqm. On the prepared bituminous/ granular surface cleaned with mechanical broom.including all type of materials, labour, tools & plants, taxe, octroi ,vat ,toll,etc.but excluding GST for proper completion of work as per direction Engineer-in-charge.

Providing laying, dense graded bituminous macadam with higher capacity batch type HMP using grushed aggregates of specified grading, premixed with bituminous binder (VG-30) @4.5 per cent by ewight of total mix and filler

(BC Gr-II) Providing and laying bituminous concrete (Gr-II) with Higher Capacity batch type hot ,ix plant using crushed aggregates form approved quarry of specified grading, premixed with bituminous binder (VG-30) @5.40 percent of mix

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes.

Construction of granular sub base by providing well graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achive desire density complete as per technical specification clause as per MORD 401

Laying of 80 mm thick precast cement concrete I- shaped interlocking paver blocks with top layer of minimum 8 mm thickness having plan dimension 200x(160+120)mm O.P. cement, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 30MPA (M-30) and weight 5.0 Kg per no . confirming to IS:15658-2006 including all and i/c 4cm sand layer

providing and fixing of granite stone board

Add 18 % GST Amount

Please Enable Macros to View BoQ information