SPECIAL REPAIRS TO BLDG NO P 228 OFFICERS MESS AT 26 MADRAS UNDER GE N SECUNDERABAD

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S & F glazed ceramic coloured tiles in vertical surfaces of size 450x300x7mm thick or of any size(concept type of any pattern ) set and jointed in neat cement slurry and pointed in clolured cement to match coloured tiles over 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L PCC 25mm thick type B-0, 1 : 2 : 4 (12.5 mm graded stone aggregate) as in sub-base to floors as a leveling layer etc., where ever as required complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick (square/rectangle) polished light shade, area of each tiles not exceeding 0.36 sqm each in floors and jointed in neat cement slurry and pointed in white or coloured cement to match over and including for providing of screed bed or bedding layer of cement mortar 15mm thick for laying floor finish in CM 1:6 complete all as specified and as directed

M&L for vitrified ceramic tiles 10 mm thick (square/rectangle) polished light shade, area of each tiles not exceeding 0.36 sqm each in skirting and dados and jointed in neat cement slurry and pointed in white or coloured cement to match over and including for providing rendering 10mm thick on brick/concrete surface in CM 1:4 to receive tiles in skirting/dados complete all as specified and as directed

S & F Non skid ceramic coloured tiles 7 to 8 mm thick (joint free) area of each tile exceeding 0.11 but not exceeding 0.18 sqm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, laid over screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified and as directed.

S & F Non skid ceramic coloured tiles 7 to 8 mm thick (joint free) area of each tile exceeding 0.06 but not exceeding 0.11 sqm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, laid over screed bed 15mm thick in CM (1:6) complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over screed bed of 15mm thick in cm 1:6 complete all as specified and directed.

M&L for machine cut kota stone as in skirting / dado 20-25mm thick over cement plaster of 10mm thick base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement or lime mortar including all quoins, arches, pillars, etc but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 m mean radius and built in cement mortar (1:6) complete all as specified and directed.

M & L for half brick work with fly ash bricks old size , straight or curved on plan exceeding 6.0 m mean radius and built in cement mortar (1:4) as in partition walls complete all as specified and directed.

M&L for Stone walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc of any description, including raking out joints hacking for key scrubbing down with water etc., complete all as specified and as directed.

Material and labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified and as directed

M & L for rendering 5 mm thick in cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth without using extra cement in patches not exceeding 3 sqm each patch complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces in two coats (10 + 5 mm), both coat mixed with integral water proofing compound ISI Marked @ 2% by the weight of cement and finishing the surface even and fair complete all as specified and as directed. Note - WPC shall be measured and paid separately

Supply only water proofing compound. Make : FOSROC/ Dr. Fixit/CICO etc complete all as specified and directed.

M&L for removal of loose and disintegrated concrete of RCC structural members viz slab, beam column and lintel etc by low impact hammer including removal of debris outside MD land cleaning the surface by high pressure water jet or by air blast and exposed reinforcement bars with wire brush and apply two coats of anti-rust protective chemical at suitable intervals all as per manufactures instruction to resist further deterioration of re-inforcement bar including use and waste form work providing welded wire mesh of size 100 x 100 mm of wire 3 and using spray gun pressure guniting in CM 1:3, 30m thick finishing guniting surface in cement mortar 1:3, 10mm including using water proofing compound 2% by weight of cement and finishing even and smooth without using extra cement to match the existing surface and unit rates quoted shall include for necessary scaffolding trestles, ladders and cradles required execution of the work and protective work complete all as specified and as directed.

All as per item No 20 above but for slabs / chajjas and thickness of guniting 25mm and finished even and smooth with 5mm thick cement plaster 1:3 using water proofing compound 2% by weight of cement all as specified and directed.

M & L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded agg) as in shelves etc set in CM 1:4 complete all as specified and as directed.

S & F mild steel TMT bars 6mm to 8mm dia over, cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mile steel wire non less than 0.9 mm dia securing with clips in quality complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work(table rubbed and polished)in steps, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over screed bed of 15mm thick in cm 1:6 complete all as specified and directed.

M&L wall cladding with using granite 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete with 10 mm thick wall base plastering bed in CM 1:3 complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps cooking platform complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 Sqm each complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exceeding 4.00 sqm each complete all as specified and as directed

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

M&L for Butt hinges med weight cold rolled mild steel and fixed 100mm size fixed complete all as specified and as directed.

M&L for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt of extruded section and fixed 150 mm long fixed complete all as specified and as directed.

S&F extruded aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and as directed.

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chambered, put together with glue pinned at joints complete all as specified and directed.

M&L for MS work as in hold fast made in flat iron complete all as specified and as directed.

Preparation of wood surface, treating the back of chowkhat, end of post etc with coal tar black paint area tarred exceeding 0.1 Sqm but not exceeding 0.5 sqm each complete all as specified and as directed.

Treating small articles such as hold fasts, ends of posts, backs of chowkats etc area not exceeding 0.10Sqm each with coal tar black paint complete all as specified and as directed.

Cutting holes in stone walls depth exceeding one brick and not exceeding two brick thick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 complete all as specified and as directed.

S&F Flush shutters 30mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

M&L 30mm thick 2nd class hard wood, glazed and skelton shutters for windows, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass, etc; sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (b) complete all as specified and as directed.

M&L 35mm thick 2nd class hard wood, glazed and skelton shutters for doors, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a) all as specified and as directed

S&F in repairs second class hard wood Plain fillets. square, rectangular or triangular in section, clean sawn, se-cured with nails or brads of sectional area exceeding 13 and not exceeding 25sqcm complete all as specified and as directed.

S&F in repairs second class hard wood Plain fillets. square, rectangular or triangular in section, clean sawn, se-cured with nails or brads. Of sectional area exceeding 06 and not exceeding 13 sq cm complete all as specified and as directed.

S&F in repairs 18mm thick Plywood grade BWR type BB, fixed with screws to frame work, fixed with screws to timber frame work complete all as specified and as directed.

S&F in repairs 12 mm thick Plywood grade BWR type BB, fixed with screws to frame work, fixed with screws to timber frame work all as specified and directed

M&L Decorative laminate 0.9mm thick Type I of texture surface finish, colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised 40mm width of flap fixed with screws complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or galvanised wire staples complete all as specified and as directed.

S&F helical door spring of size 300mm, brass ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed

Supply and fix Solid PVC door frame of size 50 x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube,single side pre laminated PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with pre laminated sheet as per specification & drawings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) both side pre laminated PVC sheet used instead of plain colour PVC sheet , stile and rails feathered at edges ,consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Paneling of pre laminated PVC sheet on both sides to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site a as per specification & drawings complete all as specified and directed.

M & L for Butt hinges of size 100 mm long extruded aluminium alloy with galvanised mild steel hinge pin of type C-21 complete all as specified and as directed

S & F 150mm long aluminium handles, cast type anodised extruded section and fixed complete all as specified and as directed.

S & F aluminium anodized barrel tower bolt of extruded section of size 150 mm long complete all as specified and as directed.

S&F in repairs vitreous china water closet 'Orissa' pattern of size 580mm X 440mm, white with integral foot rest (excluding flushing cistern), but including PVC flush pipe and provision of lime concrete bedding complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern ) white, complete including PVC seat cover (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs PVC valve less, syphonic action type, 10 liters capacity flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia and fixed complete all as specified and as directed.

S&F in repairs counter top coloured wash basin 600x460mm over all size fixed with necessary fixing arrangement including waste pipe, waste coupling, connection pipe from pipe to WHB with chromium plated 15mm dia flexible pipe etc. Make: Hindware Kylis Cat No- 91056 or equivalent in CERA/ PARRYWARE/NEYCER

S&F in repairs PVC connection 15mm bore size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repairs glass corner shelf of size 9" dia with chromium plated rail etc complete all as specified Make: Cat No: ACN 1173 of Jaguar or equivalent in CERA/ PARRYWARE/NEYCER/ HINDUSTAN

S&F in repairs brass chromium plated toilet paper holder complete all as specified and as directed. Make:Jaguar Cat No. ACN 1151 N or equivalent inCERA/ PARRYWARE/NEYCER/ HINDUSTAN

S&F in repairs brass chromium plated Towel Ring complete all as specified and as directed. Make : Jaquar Cat No..ACN 1121N or equivalent in CERA/ PARRYWARE/NEYCER/ HINDUSTAN

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed.

Cutting and grooving of wall for fixing of CPVC pipe lines and after fixing of CPVC pipe line and making good of all cutting surfaces etc complete all as specified and directed.

S&F CPVC pipes, SDR 13.5 pipes & plain CPVC SDR 11 fittings, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow,Tee, bends, unions ,sockets , male and female Threaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.

S&F Tubes, ‘medium grade’ galvanised, 25 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in round shape etc complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints, complete fittings etc fixed to wall fixed with MS clamps with two nuts wall nails etc complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps with two nuts wall nails etc complete all as specified and as directed.

Supply & fixing PVC (SWR) bends 110mm bore, any radius with oval access door fixed in repairs complete all as specified and as directed.

Supply & fixing PVC (SWR) bends 75mm bore, any radius with oval access door complete all as specified and as directed.

Supply & fixing PVC (SWR) 75mm bore, junction single(single T) equal or unequal without access door complete all as specified and as directed.

S&F in repairs 2-in-1 Chromium plated Bib cock with wall flange suitable for 15 mm bore pipe complete all as specified and as directed. Make: Jaguar Cat No: CON- 041KN or equivalent in CERA/ PARRYWARE/NEYCER/ HINDUSTAN

S&F in repairs wall mixing valve including three joints to steel pipe or unions or plugging and securing to walls Chromium plated with wall flange suitable for 15 mm bore pipe complete all as specified and as directed. Make : Jaguar or equivalent in CERA/ PARRYWARE/NEYCER/ HINDUSTAN

S&F in repairs angle cock type stop cock, cast copper alloy screwed down, high pressure, with crutch handle, screwed both ends for 15 mm dia bore iron pipe or for unions complete all as specified and as directed. Make: Jaquar Cat No. CON-CHR 053 or equivalent in CERA/ PARRYWARE/NEYCER/ HINDUSTAN

S&F in repair brass chromium plated WHB Central Hole Basin Mixer screwed down for iron pipes of 15mm bore complete all as specified and as directed. Make Jaguar Cat No CON-CHR- 167 KNB or equivalent in CERA/ PARRYWARE/NEYCER/ HINDUSTAN

S&F in repairs Brass chromium plated health faucet with health faucet tube 1.5 mtr long and stand etc screwed for 15mm bore iron pipe or 2 - in -1 tap complete all as specified and as directed. Make : Cat No ALD 573 of Jaguar or in CERA/ PARRYWARE/NEYCER/ HINDUSTAN

S&F in repairs brass chromium plated overhead shower 150x150mm square shape single flow ( ABS Body Chrome Plated with Gray Face Plate cleaning system complete all as specified and as directed. Make: Jaguar cat No OHS 35495 or equivalent in CERA/ PARRYWARE/NEYCER/ HINDUSTAN

S&F in repairs looking mirror decorative designer type of size 900x750x 6 mm thick over 9mm thick plywood complete all as specified and as directed.

Dismantling of water tank of capacity exc 500 & not exceeding 1000 litres complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks TRIPLE LAYER (cylindrical vertical with closed top)of 1000 ltrs capacity hoisted and fixed in position in SSR Part-I complete all as specified and directed.

S&F in repairs 20mm dia bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed.

M&L for preparation of old steel surfaces of any description exc 10cm girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparing the new steel or iron surfaces of any description over 10 centimeter width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed

M&L for preparation of old wooden surfaces of any description exceeding 10cm girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation and treating with two coats of synthetic enamel paint over a coat of pink primer to new wood and wooden surface exceeding 10cm width or girth all as specified and as directed

M&L for preparing the old plastered or unplastered decorated surfaces of ceilings and applying two coats of white wash on ceiling surfaces etc all as specified and as directed.

M&L for preparation of new plastered ceiling surfaces and applying three coats of white wash on ceiling surfaces all as specified and as directed.

M&L for complete removal of existing treatment on wall /ceiling surfaces and applying two coats of oil bound distemper over a coat of primer over a coat of 3mm thick birla wall care putty etc complete all as specified and as directed.

M & L for preparing newly plastered wall surfaces of walls and applying two coats of distemper oil emulsion over 3 mm thick wall care putty and a coat of primer using chalk whiting etc complete all as specified and as directed.

M&L Complete removal of existing treatment on walls and applying 2 coats of apex ultima weather proof paint over a coat of apex ultima primer over a coat of primer and over a coat of smooth putty finish of surface complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and supply two coats of weather proof paint over a coat of primer and over a coat of smooth putty finish of surface complete all as specified and as directed.

S&F in repairs stainless steel curtain rod of 25 mm bore fancy type complete all as specified and as directed

S&F in repairs for stainless steel curtain rod brackets (decorative type) suitable for curtain rod of 25 mm dia, complete all as specified and as directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided in roof padding concrete etc complete incl removal of demolished material to a distance complete all as specified and as directed.

M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate with mixed with integral water proofing compound ISI Marked @ 2% by the weight of cement as in leveling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamfered on edges and formwork etc all as specified and directed. Note - WPC shall be measured and paid separately

M&L for providing water proofing treatment with APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric ( wt not less than 150gm/Sqm) applied on primed surface ( priming coat as per the directions of Manufacturer) by forced (torch) application with 10cm overlaps A coat of blown bitumen 85/25 grade @ 1.2 Kg/sqm to be applied on top of memberane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm including screeding / plastering of 15mm thick in C:M 1:6 with using wpc 3% by wt of cement complete all as specified including dismantling of old unserviceable tar felt of any description all as specified and directed.

Demolition of concrete in ground floors (un re-inforced) and paving not exceeding 15 cm thickness (below or above ground level) and including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L PCC 1 : 3 : 6 type C1, 75 mm thick ( by using 20mm graded stone aggregate) for plinth protection finishing even and smooth without using extra cement all as specified and as directed.

Forming construction Joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:4:8 mix, type D2 (using 40 mm graded stone aggregates) as in sub base to floor complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:4:8 mix, type D2 (using 40 mm graded stone aggregates) as in sub base to floor complete all as specified and as directed.

M&L for designer rubber moulded chequered cement concrete tiles with mixture of grey and white cement in equal proportions with pigments of size 300 x 300 x 22mm or 250 x 250 x 22mm thick and set and pointed in neat cement slurry in floors over a screed bed or bedding layer in CM 1:6, 15mm thick for laying floor finishes etc complete all as specified and as directed.

S&F in repairs 0.56 mm thick plain anodized Aluminum sheeting alloy 31000 H4 in covering to door shutters etc fixed with aluminum alloy screws complete all as specified and as directed.

Supply and fix steel windows with double shutter (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullion should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and ave width of aperture 1.4mm shall be used for fly proofing. 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square safety grills, locking arrangement and all necessary accessories etc and any nos of panels,designs completed all as specified and directed by Engr-in-Charge. NCL Alltech or equivalent in / MADHU INDUSTRIES Bangalore / M/s Godrej & Boyce / M/s Sen Harvic Bangalore.

S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vetted profiles are to be reinforced with 19 x 19mm MS square tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc all as per specified and directed (Make SINTEX or equivalent settings in RAJSHRI , NANDI make as approved by accepting officer) complete all as specified and as directed

Dismantling of wrought iron or MS works of any description such as ,chajja etc, including necessary straightening of bends complete all as specified and directed.

S&f MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Supply and fixed in repairs stainless steel sink with draining board overall size 915mmx460mm and bowl size 410mmx330mmx160mm made out of stainless steel 1 mm thick for kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall, including cantilever brackets and connecting to union / pipe complete all as specified and as directed.

Taking down aluminum windows/ventilator/Doors complete with frames and shutters (without taking off the shutters) of area not exceeding 2.00 sqm complete all as specified and as directed.

S&F standard aluminum sections of any Type as in doors, windows, ventilators, partitions etc, powder coated, cut to size, jointed with cadmium plated steel screws, including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), Nylon ball bearings and Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window etc complete all as specified and as directed Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Particle/Ply wood board only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate.

Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for not exceeding 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and directed.

Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for exceeding 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and directed.

Supply only for 12mm thick Veneered decorative plywood, grade I (with BWR resin) decorative both side faces etc complete all as specified.

S& F Door closer hydraulically regulated, designation No. 3,universal type, Aluminium extruded section body suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S& F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring and fixed in floor 150mm complete all as specified and directed.

S& F Mortice latch with two levers (vertical type), but of brass body and fixed 100 mm complete all as specified and as directed.

S&F 12 mm thick toughened glass door engraved with logo with all patch fittings such as Ozone Opf-2(Top patch), Opf-3 (Bottom Patch), OPL-1 (corner patch lock with strike plate), OFS-ACC-GDP ( Top pivot for patch fitting door), OGH-55 (32 x 130033) PSS Finish H-type Handle including floor door spring, pivot, cutouts, holes etc complete all as specified and as directed. Note: Rate shall be inclusive of Engraving logo. The contractor shall visit site before quoting and access exact requirement. No claim what-so-ever shall be entertained on this account. For additional details, if any, contractors are advised to visit AGE B/R (N) No I of GE north secunderabad before quoting of the tender..

S&F in repairs 15mm dia bib taps fancy type cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Excavation in trenches n.exe 1.5m wide and not exe 1.5m deep for laying of drainpipes etc or for manhole, etc., not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning filling in soil, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated soil to a distance not exc 50m and depositing where directed complete all as specified and as directed.

Extra over forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc.

M&L for TMT bars 8mm to 10mm dia cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for 150mm bore Reinforced concrete pipes, class NP3 laid and jointed with collar complete all as specified and as directed.

M&L Concrete bed with cement concrete 1:4:8 type D2 using 40mm graded stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested of 150 mm bore complete all as specified and as directed.

Demolition of SGSW pipes/RCC hume pipes 150mm dia set and jointed in CM complete all as specified and as directed.

Demolition of reinforced cement concrete of any description complete all as specified and as directed.

Cutting into existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benching for end forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

E/M PORTION Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

M & L for Point wiring with 1.5 Sq mm copper conductor single core FRLS PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC conduit concealed and conduit accessories of suitable dia medium grade of size not less than 20mm dia and pressed steel terminal boxes suitable for MODULAR switches size including fixing/grouting sunken/ surface as per site requirement covered with suitable modular white cover plate for fixing switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and directed. for :- (a) One light/ Bell point controlled by one, one way switch 5/6 amps, SP

(b) One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

(c) One 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent board .

(d) One 3 pin 5/6 Amps switch socket outlet point controlled by one switch on the same board.

(e) One light point controlled by two 2 way switches one, one way switch 5 amps, SP

Description as per item No 135 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor complete all as specified and directed.

S & F Switch MODULAR 1 WAY 6 amps, 230 volts complete all as specified and directed.

S & F Switch MODULAR 2 WAY 6 amps, 230 volts complete all as specified and directed.

S & F MODULAR socket 5 pin 6 amps 2 MODULE 230 Volts complete all as specified and directed.

S & F MODULAR socket 6 pin 6 /16 amps 2 MODULE 230 Volts complete all as specified and directed.

S & F electronic ceiling fan regulator MODULAR 5 stepped type heavy duty suitable to work on 230 volts complete all as specified and directed.

S & F Switch MODULAR one way 16 amps, 230 volts complete all as specified and directed.

S & F Switch MODULAR bell Push 6 amps, 230 volts complete all as specified and directed.

S & F bidirectional fancy holder with plate (metal ring) complete all as specified & directed.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed.

S & F call bell ding dong AC,230 Volts,single pole complete all as specified and directed.

S & F wall mounted LED Batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1x20 w watts, 230 volts, bipin holders, DIFFUSED TYPE connector block, internally pre wired etc with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed. Make - Havells cat No-REGALBATTENT8UPTO1X22 WSSBSWH incl Tube Rod cat No-PHOTONULTRA1213T 8SSTL20WLED865SPC or equivalent in C&S/Philips/Wipro.

Supply and fix surface mounting flat panel 4'x1' made of extruded aluminium frame with electronic driver luminaire 34 watts LED glare free symmetrical illumination mounted in ceiling surfaces including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make - Havells Cat No - PLUTOSURFACE4X1PLS 34WLED857S or equivalent in C&S/Philips/ Wipro.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S & F Vertical type TPN DB 8 way double door with incoming MCCB FP 415 volts AC 3 phase 50 Hz, 16KA breaking capacity with adjustable magnetic setting for current ranging of capacity 160 Amps confirming to IS-13947 (P-2) IEC:947 made out of CRCA sheet housing with powder coating & confirming to IS 13032, IS 8623, BS 5486 accommodated suitably in a MS enclosure weather proof having hinged and robust locking arrangement duly powder coated complete all as specified and as directed. DB MAKE: Hovels Cat No DHDLVDRWGOFO08 or equivalent to C&S/Standard/Legrand MCCB Make : Hovels Cat No IHLGSF0160 or equivalent in C&S/Standard/Legrand.

S & F sheet metal enclosure MCB's 240 volt 8 way single pole and neutral with 200 amps rated bus bar double door on wall with and including suitable flat iron clamps duly grouted/fixed flush in the wall using suitable lugs & glands complete all as specified and directed. Make - Havells - DHDPSHODRW08/DHDPSHODPW08 or equivalent in C&S/Standard/Legrand

S & F sheet metal enclosure MCB's 240 volt 12 way single pole and neutral with 200 amps rated bus bar double door on wall with and including suitable flat iron clamps duly grouted/fixed flush in the wall using suitable lugs & glands complete all as specified and directed. Make - Havells - DHDPSHODRW12/DHDPSHODPW12 or equivalent in C&S/Standard/Legrand

S & F MCB SPN 40/60 Amps 240 volts, C SERIES for fixing on MCB DB complete all as specified and directed.

S & F MCB SP 6 to 32 Amps 240 volts "C" series for fixing on MCB DB complete all as specified and directed.

M & L Submain wiring with 2 runs of single core 6 sqmm FRLS PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metallic rigid PVC conduit concealed and conduit accessories of medium grade not less than 25 mm dia including one run of single core 6 sqmm FRLS PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuity conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable sub main wiring complete all as specified and as directed. Note : Two runs of 6 Sqmm cable and one run of 6.0 Sqmm cable and one run of conduit will be measured as one length.

M & L Sub main wiring with 2 runs of single core 4 sqmm FRLS PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metallic rigid PVC conduit concealed and conduit accessories of medium grade not less than 20 mm dia including one run of single core 4 sqmm FRLS PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuity conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable sub main wiring complete all as specified and as directed. Note : Two runs of 4 Sqmm cable and one run of 4.0 Sqmm cable and one run of conduit will be measured as one length.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wire mesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate of SSR Part I, 2009.

S & F sheet steel MS enclosure earth plug socket 2 pin 20 amps with metal top 20 amps with MCB 32 Amps complete all as specified and as directed.

S & F wall mounted decorative luminaire suitable for retrofit LED 10 watt including 1x10 watt LED bulb complete all as specified and as directed. Make - Havells Cat No LHDL07150099 or equivalent in Bajaj/ Philips /Wipro.

Supply and fix Heavy duty Exhaust fan, metal body, 300mm sweep, 1400 RPM 230 volts AC Supply with louvers including opening in wall and fixing arrangement with nut bolts and making good the disturbed surface complete all as specified and as directed. Make Havells Cat No- Turbo Force SP equivalent in Bajaj/CG/ Wipro/ Philips

Supply and fix in replacement of Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaries comprising of high brightness LEDs including taking down UNSV fitting complete all as specified and as directed. Make Havells RUGBYNEONFT10WLED860SSYMTOPC or equivalent in C&S/Wipro

Supply and fix wall mounted mirror type LED Batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1x10W, 230 Volts, DIFFUSED TYPE connector block, internally pre wired etc with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. MAKE: Havells/C&S/Wipro/

Taking down ceiling fans 48"/56" sweep, cleaning the dust properly, oiling and greasing of bolts and bearings including refixing and connecting up complete all as specified and as directed .

Taking down the geysers of capacity 25/35 from its mounting position by removing all water and electric connections and de-assembling the geyser and carrying out the following works, (a) Descaling, cleaning the inner tank thoroughly and there should not be any bad taste of water. (b) Examining the water tightness of storage tank after cleaning. (c) Examining the physical condition of thermostat, base assembly fusible plug and outer tank for its serviceability. (d) Inspection of pilot lamps. (e) Reassembling the geyser parts and testing including checking all electrical system (ensuring there is no current leakage) . (f) Re-fixing the Geyser and making electric connections, inlet and outlet water connections and testing and checking of all water inlet, outlet valves connected with geysers.

M/S DIVIJA BUILDERS

MAHALAKSHMI INFRA PROJECTS

SAI RUPA CONSTRUCTIONS

K LAKSHMAN SINGH AND CO

Vara Enterprises

NEWS CONSTRUCTIONS

PAVAN ENTERPRISES

SHAH ENTERPRISES

ATUL ENTERPRISES