REPAIRS AND REPAINTING OF STEEL FURNITURE AT UNIT LINES MD ACCN AND FURNITURE YARD OF BSO SOUTH UNDER GE SOUTH BANGALORE

Amount

ALMIRAH LARGE STEEL (Drg No.FD-1031) Removing the existing unserviceable three way locking device and supply and fix three way locking device with cover for almirah large steel complete as shown on drgs and all as directed by the Engr in Charge.

ALMIRAH SMALL STEEL (Drg No.FD-1032) Removing the existing unserviceable three way locking device and supply and fix three way locking device with cover for almirah medium steel complete as shown on drgs and all as directed by the Engr in Charge.

ALMIRAH LARGE STEEL/SMALL STEEL (Drg No. FD-1031 FD-1032 FD-6 - applicable to item nos. 03 to 11) Removing the existing unserviceable lock and supply and fix new lock Make: Godrej/Link/Harrison of appropriate size, 6 levers with duplicate keys chromium plated or equivalent as suitable in almirah large/ medium steel as shown on drgs and all as directed. Notes : (i) Unit rate quoted shall include for provision/repairs to back plate, cover to key hole, back side cover, locking device etc. (ii) Removing the existing steel chromium plated handle and supply and fix new handles shall be measured and paid separately.

Removing the existing unserviceable handle and supply and fix new chromium plated M S handle 125mm long to almirah large/medium steel as shown on drg and all as specified and as directed.

Removing the existing unserviceable clamps for shelves and spot welding the shelves to almirah sides as directed and shown on drgs for almirah large/medium steel. Note:- Welding each shelf completely will be measured as a single unit.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah large steel of Size 920 x 485 x 1985mm including fixing new 3mm hard rubber pad in the bottom of legs etc complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah medium steel of Size 760mm x 440mm x 1270 mm including fixing new 3mm hard rubber pad in the bottom of legs etc complete all as specified and as directed.

Removing the existing unserviceable/ damaged shelves for almirah large steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah all as specified and as shown on drg.

Removing the existing unserviceable/ damaged shelves for almirah medium steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah all as specified and as shown on drgs.

Removing the existing unserviceable/ damaged/ broken legs for almirah large and supply and fix new legs and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah all as specified and as shown on drgs.

Removing the existing unserviceable/ damaged/ broken legs for almirah medium and supply and fix new legs and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah all as specified and as shown on drgs.

TABLE CLERK STEEL (Drg No.FD-1004 - applicable to item nos. 12 & 13) Material and Labour for cleaning / preparing the existing surfaces of table office clerks steel including inner surfaces of steel drawers and applying one coat of synthetic enamel paint by spray process to achieve a uniform finish and to fix hard rubber shoe for legs all as directed.

Removing the existing unserviceable drawers of table office clerk steel and supply and fix new drawer made of MS sheet CRC 1 mm thick bent to shape to its original position including Godrej lock steel of 6 levers or equivalent and applying one coat of synthetic enamel paint over a coat of red oxide primer all as specified and as shown on drgs.

TEAPOY VERANDAH (Drg No. FD-255 FD-383 - applicable to item nos. 14 & 15) Removing the existing unserviceable top and supply and fix new top of size 900x450mm x 18mm thick pre-laminated particle board of white colour with 3mm thick teak wood edging alround as directed, including painting the under side of table top with two coats of synthetic enamel paint (white) over a coat of red oxide primer all as specified and as shown on drg.

Supply and fix new hard rubber toes of appropriate size suitable to Teapoy verandah all as specified and as shown on drawing and as directed.

TABLE WITH DRAWER STEEL 900 X 600 X 760 MM (Drg No. FD-1008 - applicable to item nos. 16 to 19) Removing the existing unserviceable top and supply and fix new top of particle board commercial 18 mm thick exterior grade pasted with 1.5 mm thick plastic laminated sheet fixed on top all as directed and as shown on drgs.

Removing the existing unserviceable drawers of table and supply and fix new drawer made out of MS sheet CRC 1mm thick bent to shape to its original position and applying two coat of synthetic enamel paint over a a coat of red oxide primer including welding to the table dining and all as specified and as shown on drgs.

Removing the existing unserviceable/damaged leg/ frame and replacing with new leg/frame of 25mm x 25mm square MS Tube 1.6 mm thick welded and applying two coat of synthetic enamel paint over a one coat of red oxide primer including welding to the table and all as specified and as shown on drgs.

Material and labour for preparing old steel surfaces of steel frame of table 900x600x760 mm with one coat of synthetic enamel paint as specified and as shown on drgs.

TABLE WITHOUT DRAWER FOR HAVs & ORs STEEL 900 X 600 X 760MM (Drg No. FD-1007 - applicable to item nos. 20 to 22) Removing the existing unserviceable top and supply and fix new top of particle board commercial 18 mm thick exterior grade pasted with 1.5 mm thick plastic laminated sheet fixed on top as directed and as shown on drgs.

Removing the existing unserviceable/damaged leg/ frame and replacing with new leg/frame of 25mm x 25mm square ms tube 1.6 mm thick welded and applying one coat of red oxide primer including welding to the table and all as specified and as shown on drgs.

Material and labour for preparing old steel surfaces of steel table of size 900x600x760 mm with one coat of synthetic enamel paint all as specified and as shown on drgs.

LOCKER STEEL (BUILT IN) (Drg No. FD-1029 - applicable to item nos. 23 to 27) Material and Labour for cleaning/preparing the existing surfaces of locker steel including inner and outer surfaces and applying one coat of synthetic enamel paint by spray process to achieve a uniform finish all as directed and as shown on drg.

Removing the existing unserviceable/damaged/broken legs for lockers steel and supply & fix new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker and providing rubber pad 3mm thick for legs all as specified and as shown on drgs.

Removing the existing unserviceable/damaged hanging rod and supply and fix new hanging rod 20 mm dia steel chromium plated conduit pipe and two sockets shall be provided at the end of hanging rod.

Removing the existing unserviceable/damaged handle and supply and fix new chromium plated handle 100 mm long to locker steel fixed to shutters all as specified/directed and as shown on drg.

Removing the existing unserviceable/damaged Hasp and staple and supply and fix new cromium plated hasp & staple 75 mm long to locker steel all as specified/directed and as shown on drg.

TABLE OFFICERS STEEL (Drg No. FD-1002 - applicable to item nos. 28 to 30) Material and labour for cleaning/preparing the existing surfaces of table office officer steel including inner surfaces of drawers and applying one coat of synthetic enamel paint to achieve a uniform finish and to fix rubber toe for legs all as directed/specified and as shown on drg. .

Removing the existing unserviceable drawers of table office officer steel and supply and fix drawer made out of MS sheet CRC 1mm thick bent to shape to its original position and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified/directed and as shown on drg.

Removing the existing unserviceable top and supply and fix 18 mm thick particle board commercial exterior grade pasted with 1.5mm thick plastic laminated sheet fixed on top all as specified/directed and as shown on drg.

CHAIR TUBULAR STEEL WITH /WITHOUT ARMS (Drg No. FD-75 - applicable to item nos. 31 to 37) Material and labour for preparing the surfaces of old steel tubular frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubular steel with arms all as directed/specified and as sshown on drg.

Material and labour for preparing the surfaces of old steel tubular frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubular steel without arms all as directed/specified and as sshown on drg.

Removing the existing unserviceable/damaged seats from chair tubular steel with/without arms and supply and fix new frame of size 480mmx450mmx25mmx 4 Nos made out of teak wood frame with half round beading at edges all as directed/specified and as shown on drg.

Removing the existing unserviceable/damaged back from chair tublular steel with/without arms and supply and fix new back frame of size 480mmx45mmx25mmx 4 Nos made out of teak wood frame all as directed/specified and as shown on drg.

Removing the existing unserviceable/broken arm rest and supply and fix new arm rest of size 380mmx50mmx25mmx 2 Nos with 1st class hard wood made to shape and painted with two coats of black synthetic enamel paint for chair tubular steel with arms all as directed/specified and as shown on drg.

Removing the existing unserviceable rubber shoes from bottom of chair and supply and fix new hard rubber shoes to the bottom of chair all as directed/specified and as shown on drg.

Removing the existing unserviceable PVC/rubber plug from top of chairs and supply and fix new PVC / rubber plug to the top of chair all as directed/specified and as shown on drg.

BOOK CASE STEEL (Drg No. FD-1028 - applicable to item nos. 38 to 41) Removing the existing unserviceable handle and supply and fix new steel handle 100 mm long to book case steel all as specified/directed and as shown on drg.

Removing the existing unserviceable lock and supply and fix new lock with duplicate keys (Make : Godrej code N09350 or equivalent) all as specified/directed and as shown on drg.

Removing the existing unserviceable glass of shutters and supply and fix new glass to book case steel all as specified/directed and as shown on drg.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint to all external and internal surfaces of book case steel all as specified/directed and as shown on drg.

BOOKSHELF OPEN LARGE STEEL (Drg No. FD-69) Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint grey/olive green on all external surfaces all as specified/directed and as shown on drg.

ALMIRAH LARGE STEEL 1/2 Hanging X 1/2 Shelving (Drg No. FD-1033 - applicable to item nos. 43 to 47) Removing the existing unserviceable three way locking device and supply & fix three way locking device with cover for almirah large steel all as specified/directed and as shown on drg.

Removing the existing unserviceable lock and supply & fix new steel lock 6 levers with duplicate keys chromium plated as suitable to almirah all as specified/directed and as shown on drg. Notes : (i) Unit rate quoted shall include for provision/repairs to back plate, cover to key hole, back side cover, locking device etc. (ii) Steel chromium plated handle shall be measured and paid separately.

Removing the existing unserviceable handle and supply & fix new chromium plated steel handle 125mm long to almirah large/medium steel all as specified/directed and as shown on drg.

Removing the existing unserviceable clamps for shelves and spot welding the shelves to almirah sides all as specified/directed and as shown on drg. Note :- Welding each shelf completely will be measured as a single unit.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint to all external and internal surfaces of almirah large steel (Size 920 x 485 x 1985mm) and to fix 3mm hard rubber pad in the bottom of legs all as specified/directed and as shown on drg.

Charpoy MS Square NCOs (Drg No. FD/MAP II/01) Removing the existing plywood from charpoy MS Square NCO's and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour black to all external and internal surfaces including refixing/fixing the plywood charpoy MS Square etc complete all as specified and as directed. Note : New plywood incorporated will be measured and paid seperately under relevant item of this schedule.

Charpoy MS Square JCOs (Drg No. FD-CECZ/TD/726 ) Removing the existing plywood from charpoy MS Square JCO's and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour black to all external and internal surfaces including refixing/fixing the new plywood to the charpoy MS square etc complete all as specified and as directed. Note : New plywood incorporated will be measured and paid seperately under relevant item of this schedule.

BED HARD TOP MS SQUARE FOR OFFRS (Drg No.FD/E6/MAP/08(R)) Removing the existing plywood from charpoy MS square Offrs and preperation of old painted steel surfaces and applying one coat of synthetic enamel paint colour black to all external and internal surfaces including refixing/fixing the plywood on charpoy MS Square etc complete all as specified and directed . Note : New plywood incorporated will be measured and paid seperately as supply only under relevant item of this schedule.

Supply only new plywood BWR Grade ISI marked of size 1980 mm x 900 mm x 12 mm with headless MS nut & bolt 6 mm dia 75 mm length with washer all as specified/directed and as shown on drg. Note : The supply of plywood under this item is for fixing new plywood to the items nos. 48, 49 & 50.

Global Furnisherts

Vivek Engineers